B72225T4301K101

SIOV metal oxide varistors Housed (ThermoFuse) varistors, AdvanceD series Series/Type: Date: ETFV25 February 2010 © EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire, metal compound wire Housing: thermoplastic, flame-retardant to UL 94 V-0 Features Wide operating voltage range 115 … 420 VRMS Self-protected under abnormal overvoltage conditions Very high surge current ratings of 20 kA Approvals UL Applications Air conditioner, refrigerator, TV, etc. Power meter, inverter, telecom equipment, etc. Transient voltage surge suppressors (TVSS) Delivery mode Bulk (standard) Typical applications General technical data Climatic category Operating temperature Storage temperature Electric strength Response time to IEC 60068-1 to CECC 42 000 to CECC 42 000 40/85/56 40 ... + 85 40 ... +125 ≥ 2.5 < 25 °C °C kVRMS ns Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code Type (untaped) SIOVETFV25K115E4 ETFV25K130E4 ETFV25K140E4 ETFV25K150E4 ETFV25K175E4 ETFV25K210E4 ETFV25K230E4 ETFV25K250E4 ETFV25K275E4 ETFV25K300E4 ETFV25K320E4 ETFV25K350E4 ETFV25K385E4 ETFV25K420E4 VRMS V 115 130 140 150 175 210 230 250 275 300 320 350 385 420 VDC V 150 170 180 200 225 270 300 320 350 385 420 460 505 560 imax (8/20 µs) A 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 Wmax (2 ms) J 170 185 195 215 245 290 315 345 375 410 445 495 600 700 Pmax W 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 B72225T4111K101 B72225T4131K101 B72225T4141K101 B72225T4151K101 B72225T4171K101 B72225T4211K101 B72225T4231K101 B72225T4251K101 B72225T4271K101 B72225T4301K101 B72225T4321K101 B72225T4351K101 B72225T4381K101 B72225T4421K101 Characteristics (TA = 25 °C) Ordering code Type (untaped) SIOVETFV25K115E4 ETFV25K130E4 ETFV25K140E4 ETFV25K150E4 ETFV25K175E4 ETFV25K210E4 ETFV25K230E4 ETFV25K250E4 ETFV25K275E4 ETFV25K300E4 ETFV25K320E4 ETFV25K350E4 ETFV25K385E4 ETFV25K420E4 Vv (1 mA) V 180 205 220 240 270 330 360 390 430 470 510 560 620 680 ∆Vv (1 mA) % ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 vc,max (ic) V 300 340 360 395 455 545 595 650 710 775 840 910 1025 1120 ic A 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Ctyp (1 kHz) pF 2280 2010 1860 1740 1500 1245 1140 1050 945 870 810 750 675 630 B72225T4111K101 B72225T4131K101 B72225T4141K101 B72225T4151K101 B72225T4171K101 B72225T4211K101 B72225T4231K101 B72225T4251K101 B72225T4271K101 B72225T4301K101 B72225T4321K101 B72225T4351K101 B72225T4381K101 B72225T4421K101 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Dimensional drawings Weight Nominal diameter mm 25 VRMS V 115 ... 420 Weight g 13.3 ... 16.3 Lead configuration Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Reliability data Test Varistor voltage Test methods/conditions Requirement The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV (1 mADC @ 0.2 ... 2 s). The maximum voltage between two terminals with the specified standard impulse current (8/20 µs) applied. CECC 42 000, test C 2.1 100 surge currents (8/20 µs), unipolar, interval 30 s, amplitude corresponding to derating curve for 100 impulses at 20 µs CECC 42 000, test C 2.1 To meet the specified value Clamping voltage Surge current derating, 8/20 µs |∆V/V (1 mA)| ≤10% (measured in direction of surge current) No visible damage Surge current derating, 2 ms |∆V/V (1 mA)| ≤10% (measured in direction of 100 surge currents (2 ms), unipolar, interval 120 s, amplitude corresponding surge current) to derating curve for 100 impulses at 2 No visible damage ms UL1449, limited current abnormal overvoltage test. Apply a high AC voltage to ThermoFuse varistor, the amplitude of overvoltage and current limit will be adopted from UL1449 general instruction in section 37. The specimen will be tested on a softwood surface covered with a double layer of white tissue paper. The specimen is to be loosely draped with a double layer of cheesecloth. The cheesecloth shall cover openings where flame, molten or other particles may be expelled as a result of the test. The test result will be visually inspected. Any of these phenomena shall not be observed, or this specimen will be judged as failed part. 1. Emission of flame, molten metal, glowing or flaming particles through any openings (pre-existed or created as a result of the test) in the product. 2. Charring, glowing, or flaming of the supporting surface, tissue paper, or cheesecloth. 3. Ignition of the enclosure. 4. Creation of any openings in the enclosure that result in accessibility of live parts, when judged in accordance with accessibility of live parts, UL1449 section 13. Abnormal overvoltage test Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 v/i characteristics v = f (i) for explanation of the characteristics refer to "General technical information", chapter 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-ETFV25 ... E4 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-ETFV25 ... E4 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 10 Housed varistors ThermoFuse varistors, ETFV25 series ETFV25 Cautions and warnings General 1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 3. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. Storage 1. Store SIOVs only in original packaging. Do not open the package before storage. 2. Storage conditions in original packaging: Storage temperature: 25 °C ... +45 °C, Relative humidity: