B76010B3379M025

Polymer Chip Capacitors TOPcap - Basic Series/Type: Date: B760 July 2006 © EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Polymer chip capacitors TOPcap - Basic Features High volumetric efficiency Ultra-low ESR High permissible ripple current Only 20% derating recommended Stable temperature and frequency characteristics Operating temperature 55 … +105 °C No ignition failure mode Lead-free and material content compatible with RoHS Suitable for lead-free soldering Taped and reeled to IEC 60286-3 Dimensional drawing B760 Œ Encapsulation: molded epoxy resin  Cu-lead frame; tinned surface Sn 100 Please read Important notes and Cautions and warnings at the end of this document. Page 2 of 26 Polymer chip capacitors TOPcap - Basic Dimensions Case size Dimensions in mm (inches) EPCOS EIA/IECQ L W H B 3528-21 3.5 ±0.2 (.138 ±0.008) 7.3 ±0.3 (.287 ±0.012) 7.3 ±0.3 (.287 ±0.012) 2.8 ±0.2 (.110 ±0.008) 4.3 ±0.3 (.169 ±0.012) 4.3 ±0.3 (.169 ±0.012) 1.9 ±0.1 (.075 ±0.008) 1.9 ±0.1 (.075 ±0.004) 2.8 ±0.3 (.110 ±0.012) B760 L2 typ. W2 ±0.1 H2 typ. P ±0.3 ±(.004) ±(.012) 3.3 2.2 1.0 0.8 (.138) (.087) (.039) (.031) 7.1 2.4 (.280) (.094) 7.1 2.4 (.280) (.094) 1.1 1.3 (.043) (.051) 1.6 1.3 (.063) (.051) V 7343-20 D 7343-31 Please read Important notes and Cautions and warnings at the end of this document. Page 3 of 26 Polymer chip capacitors TOPcap - Basic Marking Case size B Case size D, V B760 Capacitance coding 1st and 2nd digit 3rd digit Capacitance in pF Multiplier: 6 = 106 pF 7 = 107 pF 8 = 108 pF Date coding Year S = 2004 T = 2005 U = 2006 V = 2007 W = 2008 X = 2009 Month 1 = January 2 = February 3 = March 4 = April 5 = May 6 = June 7 = July 8 = August 9 = September O = October N = November D = December Please read Important notes and Cautions and warnings at the end of this document. Page 4 of 26 Polymer chip capacitors TOPcap - Basic Specifications and characteristics in brief Series Ordering code Technology Terminals Rated voltage Rated capacitance Capacitance tolerance Maximum equivalent series resistance Operating temperature range Failure rate (1 fit = 1 10-9 failures/h) Service life Leakage current Climatic category (to IEC 60068-1) Moisture sensitivity level (MSL) Overview of types (VDC) (up to 85 °C) CR (µF) 47 68 100 150 220 330 470 D(45...55) V(15*...45) D(40...55) V(12*...45*) D(40) V(18*) D(45...55) V(15*...45) D(40...50) V(35*...45*) D(25*...60) D(45) V(35*...80) D(45...80) V(15*...80) D(40...50) V(25*...45*) V(45*...60*) D(55...80) V(25*...80) 2.5 4 6.3 10 16 (at 40 °C; ≤ VR, RS ≤ 0.1 Ω/V) (VR, 5 min, 20 °C) ( 55 °C/+105 °C/56 days damp heat test) Ileak (20 °C, 100 kHz) (up to 85 °C) (20 °C, 120 Hz) VR CR ∆CR ESRmax Top TOPcap - Basic B760 Tantalum Polymer Tinned 2.5 ... 16 33 ... 470 ±20 12 ... 80 55 ... +105 ≤264 >150000 100 55/105/56 3 B760 VDC µF % mΩ °C fit h nA/µC V(70) * Upon request () The ESR value (in mΩ) is stated in parentheses Ordering code structure Please read Important notes and Cautions and warnings at the end of this document. Page 5 of 26 Polymer chip capacitors TOPcap - Basic B760 B76 TOPcap family 0 02 D 337 9 M 025 Series 0 = Basic Rated voltage 02 = 2.5 V, 04 = 4 V, 06 = 6.3 V, 10 = 10 V, 16 = 16 V Case size B, D, V Rated capacitance + exponent C [pF] 10x 686 = 68 pF 106 = 68 µF, 157 = 15 pF 108 = 10 pF 108 = 1000 µF 107 = 150 µF, Reel diameter 9 = 180 mm, 6 = 330 mm Capacitance tolerance M = ±20% ESR value E.g.: 009 = 9 mΩ, 018 = 18 mΩ, 045 = 45 mΩ Please read Important notes and Cautions and warnings at the end of this document. Page 6 of 26 Polymer chip capacitors TOPcap - Basic B760 CR Case ESRmax DFmax Ileak,max IAC,max (20 °C, size (20 °C, (20 °C, (20 °C, VR, (20 °C, 120 Hz) 100 kHz) 120 Hz) 5 min) 100 kHz) µF mΩ % µA A IAC,max (85 °C, 100 kHz) A IAC,max Ordering code (105 °C, 100 kHz) A 1.2 1.0 1.2 1.7 1.4 1.2 1.1 1.2 1.0 1.4 1.2 1.7 1.4 1.2 1.1 1.1 1.2 1.7 1.2 1.0 1.2 1.7 1.4 1.2 1.1 1.1 1.2 1.1 1.2 1.1 1.0 B76002D227*M045 B76002D227*M055 B76002V227*M015 q B76002V227*M018 q B76002V227*M025 q B76002V227*M035 B76002V227*M045 B76002D337*M040 B76002D337*M055 B76002V337*M012 q B76002V337*M015 q B76002V337*M018 q B76002V337*M025 q B76002V337*M035 q B76002V337*M040 q B76002V337*M045 q B76002D477*M040 B76002V477*M018 q B76004D227*M045 B76004D227*M055 B76004V227*M012 q B76004V227*M018 q B76004V227*M025 B76004V227*M035 B76004V227*M040 B76004V227*M045 B76004D337*M040 B76004D337*M050 B76004V337*M035 q B76004V337*M045 q B76004D477*M025 q VR (up to 85 °C) = 2.5 VDC, VR (up to 105 °C) = 2.0 VDC 220 D 1.8 1.5 45 10 55 220 D 1.7 1.3 55 10 55 220 V 3.1 2.8 15 10 55 220 V 2.6 2.1 18 10 55 220 V 2.2 1.8 25 10 55 220 V 1.9 1.5 35 10 55 220 V 1.7 1.3 45 10 55 330 D 1.9 1.5 40 10 83 330 D 1.7 1.3 55 10 83 330 V 3.4 3.1 12 10 83 330 V 3.1 2.8 15 10 83 330 V 2.6 2.1 18 10 83 330 V 2.2 1.8 25 10 83 330 V 1.9 1.5 35 10 83 330 V 1.8 1.4 40 10 83 330 V 1.7 1.3 45 10 83 470 D 1.9 1.5 40 10 118 470 V 2.6 2.1 18 10 118 VR (up to 85 °C) = 4 VDC, VR (up to 105 °C) = 3.2 VDC 220 D 1.8 1.5 45 10 88 220 D 1.7 1.3 55 10 88 220 V 3.1 2.8 15 10 88 220 V 2.6 2.1 18 10 88 220 V 2.2 1.8 25 10 88 220 V 1.9 1.5 35 10 88 220 V 1.8 1.4 40 10 88 220 V 1.7 1.3 45 10 88 330 D 1.9 1.5 40 10 132 330 D 1.7 1.4 50 10 132 330 V 1.9 1.5 35 10 132 330 V 1.7 1.3 45 10 132 470 D 2.5 2.2 25 10 188 q Preliminary Data *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Page 7 of 26 Please read Important notes and Cautions and warnings at the end of this document. Polymer chip capacitors TOPcap - Basic B760 CR Case ESRmax DFmax Ileak,max IAC,max IAC,max (20 °C, size (20 °C, (20 °C, (20 °C, VR, (20 °C, (85 °C, 120 Hz) 100 kHz) 120 Hz) 5 min) 100 100 kHz) kHz) µF mΩ % µA A A 470 D 1.9 1.5 40 10 188 470 D 1.7 1.3 55 10 188 470 D 1.6 1.3 60 10 188 VR (up to 85 °C) = 6.3 VDC, VR (up to 105 °C) = 5.0 VDC 100 D 1.8 1.5 45 10 63 100 V 1.9 1.5 35 10 63 100 V 1.7 1.3 45 10 63 100 V 1.3 1.1 80 10 63 150 D 1.8 1.5 45 10 95 150 D 1.7 1.3 55 10 95 150 D 1.4 1.1 80 10 95 150 V 2.9 2.6 15 10 95 150 V 2.6 2.1 18 10 95 150 V 2.2 1.8 25 10 95 150 V 1.9 1.5 35 10 95 150 V 1.8 1.4 40 10 95 150 V 1.7 1.3 45 10 95 150 V 1.3 1.1 80 10 95 220 D 1.9 1.5 40 10 139 220 D 1.8 1.5 45 10 139 220 D 1.7 1.4 50 10 139 220 V 2.2 1.8 25 10 139 220 V 1.9 1.5 35 10 139 220 V 1.8 1.4 40 10 139 220 V 1.7 1.3 45 10 139 VR (up to 85 °C) = 10 VDC, VR (up to 105 °C) = 8.0 VDC 68 V 1.7 1.3 45 10 68 68 V 1.4 1.3 60 10 68 100 D 1.7 1.3 55 10 100 100 D 1.4 1.1 80 10 100 100 V 2.2 1.8 25 10 100 100 V 1.8 1.4 40 10 100 100 V 1.5 1.4 55 10 100 q Preliminary Data IAC,max (105 °C, 100 kHz) A 1.2 1.0 1.0 1.2 1.2 1.1 0.5 1.2 1.0 0.9 1.2 1.7 1.4 1.2 1.1 1.1 0.5 1.2 1.2 1.1 1.4 1.2 1.1 1.1 1.1 0.6 1.0 0.9 1.4 1.1 0.6 Ordering code B76004D477*M040 B76004D477*M055 B76004D477*M060 B76006D107*M045 B76006V107*M035 q B76006V107*M045 B76006V107*M080 B76006D157*M045 B76006D157*M055 B76006D157*M080 B76006V157*M015 q B76006V157*M018 q B76006V157*M025 B76006V157*M035 B76006V157*M040 B76006V157*M045 B76006V157*M080 B76006D227*M040 B76006D227*M045 B76006D227*M050 B76006V227*M025 q B76006V227*M035 q B76006V227*M040 q B76006V227*M045 q B76010V686*M045 q B76010V686*M060 q B76010D107*M055 B76010D107*M080 B76010V107*M025 q B76010V107*M040 B76010V107*M055 *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Page 8 of 26 Please read Important notes and Cautions and warnings at the end of this document. Polymer chip capacitors TOPcap - Basic B760 CR Case ESRmax DFmax Ileak,max IAC,max IAC,max (20 °C, size (20 °C, (20 °C, (20 °C, VR, (20 °C, (85 °C, 120 Hz) 100 kHz) 120 Hz) 5 min) 100 100 kHz) kHz) µF mΩ % µA A A 100 V 1.3 1.1 80 10 100 VR (up to 85 °C) = 16 VDC, VR (up to 105 °C) = 12.8 VDC 47 V 1.3 1.2 70 10 75 q Preliminary Data IAC,max Ordering code (105 °C, 100 kHz) A 0.5 B76010V107*M080 0.5 B76016V476*M070 *= Code number for reel diameter 6 = 330-mm reel 9 = 180-mm reel Please read Important notes and Cautions and warnings at the end of this document. Page 9 of 26 Polymer chip capacitors TOPcap - Basic Derating Recommendations, maximum continuous voltage B760 The maximum continuous voltage Vcont is the maximum permissible voltage at which the capacitor can be continuously operated. It is a direct current voltage, or the sum of the basic DC voltage plus the peak value of the superimposed AC voltage (see www.epcos.com/tantalum_gti, section 7). The maximum continuous voltage depends on the ambient temperature (see figure below). Within the temperature range of -55 °C to +85 °C, the rated voltage is equal to the maximum continuous voltage. In the temperature range between +85 and 105 °C the maximum continuous voltage must be reduced linearily from the rated voltage to 4/5 of the rated voltage (Derating). Operation below the maximum continuous voltage has a positive effect on the capacitor´s reliability. Max. permissible continuous voltage (operating voltage) versus temperature Please read Important notes and Cautions and warnings at the end of this document. Page 10 of 26 Polymer chip capacitors TOPcap - Basic B760 Maximum permissible ripple current and alternating voltage loads Using Pmax from the following tables, the maximum permissible ripple current and alternating voltage loads can be calculated. Maximum permissible power dissipation with ripple current load Case size PV,max in mW B 85 D 150 V 125 Reduction of the calculated values versus the ambient temperature, cf. figure below. Permissible ripple current IAC and permissible alternating voltage VAC versus temperature T Permissible ripple current If versus frequency f Please read Important notes and Cautions and warnings at the end of this document. Page 11 of 26 Polymer chip capacitors TOPcap - Basic B760 Temperature dependence of the capacitance The capacitance of an electrolytic capacitor varies with the temperature (positive temperature coefficient). The amount by which it varies depends on the specific voltage and capacitance value. Capacitance change versus temperature (typ. values) Capacitance change versus temperature (maximum values) 55 °C TOPcap - Basic 20% + 85 °C + 25% + 105 °C + 30% Please read Important notes and Cautions and warnings at the end of this document. Page 12 of 26 Polymer chip capacitors TOPcap - Basic Frequency dependence of the capacitance The capacitance decreases with increasing frequency. A typical curve is shown. B760 Capacitance change versus frequency (typical behaviour), reference temperature 20 °C Please read Important notes and Cautions and warnings at the end of this document. Page 13 of 26 Polymer chip capacitors TOPcap - Basic Temperature dependence of Z and ESR (typical behaviour) B760 Polymer chip capacitors Case sizes B, D, V Please read Important notes and Cautions and warnings at the end of this document. Page 14 of 26 Polymer chip capacitors TOPcap - Basic Frequency dependence of Z and ESR (typical behaviour) Case size B Case size D B760 Case size V Please read Important notes and Cautions and warnings at the end of this document. Page 15 of 26 Polymer chip capacitors TOPcap - Basic B760 Dissipation factor The dissipation factor tan δ increases with frequency and tends to very high values at near-resonance frequencies. The figures below show the typical behaviour of the dissipation factor. Dissipation factor versus temperature at f = 120 Hz Dissipation factor versus frequency at T = 20 °C Please read Important notes and Cautions and warnings at the end of this document. Page 16 of 26 Polymer chip capacitors TOPcap - Basic B760 Leakage current When a direct voltage is applied to electrolytic capacitors, a low, constant current will flow through any capacitor. This so-called leakage current Ilk is a function of the voltage as well as of the temperature. (Graphs are shown below). The absolute value of the leakage current of an electrolytic capacitor is determined by defects of the dieletric. The (exclusive) usage of high-purity tantalum powder as raw material results in a low total amount of defects and thus in a low leakage current level. Leakage current versus voltage Leakage current versus temperature Please read Important notes and Cautions and warnings at the end of this document. Page 17 of 26 Polymer chip capacitors TOPcap - Basic Infrared reflow soldering, hot air reflow soldering (lead-free solders alloys) Temperature curve at component terminal in infrared and hot air soldering B760 Other profiles and peak temperatures upon request. Recommended solder pad layouts Dimensions (mm) Case size B D, V Soldering process Wave soldering Reflow soldering Wave soldering Reflow soldering R 2.7 2.5 2.9 2.7 S 2.0 1.5 2.9 2.0 T 1.5 1.1 4.4 3.9 U 5.5 4.1 10.2 7.9 Please read Important notes and Cautions and warnings at the end of this document. Page 18 of 26 Polymer chip capacitors TOPcap - Basic B760 Taping Chip capacitors are taped and reeled in accordance with IEC 60286-3. Sizes B is supplied in 8-mm blister tapes, sizes D and V in 12-mm blister tapes. The position of the positive pole (+) is shown in the dimensional drawing below. Caution! If any capacitors are left over in the tape after placement, sparks may be generated when the tape is cut into pieces. This may impair or damage process equipment. Tape dimensions and tolerances Dimensions (mm) A1 ±0.2 B1 ±0.2 D0 +0.1/ 0 D1 min. P0 ±0.11) P1 ±0.1 P2 ±0.05 W ±0.3 E ±0.1 F ±0.05 G min. T1 ±0.05 T2 max. K0 ±0.1 Case size B 3.3 3.8 1.5 1.0 4.0 4.0 2.0 8.0 1.75 3.5 0.75 0.25 2.6 2.2 D 4.7 7.7 1.5 1.5 4.0 8.0 2.0 12.0 1.75 5.5 0.75 0.3 3.6 3.3 E 4.7 7.7 1.5 1.5 4.0 8.0 2.0 12.0 1.75 5.5 0.75 0.3 4.8 4.6 F 4.7 7.7 1.5 1.5 4.0 8.0 2.0 12.0 1.75 5.5 0.75 0.25 4.5 4.2 V 4.7 7.7 1.5 1.5 4.0 8.0 2.0 12.0 1.75 5.5 0.75 0.3 2.75 2.3 X 4.7 7.7 1.5 1.5 4.0 8.0 2.0 12.0 1.75 5.5 0.75 0.3 2.45 1.8 1) 0.2 mm over 10 sprocket hole spaces. Please read Important notes and Cautions and warnings at the end of this document. Page 19 of 26 Polymer chip capacitors TOPcap - Basic Packing B760 Packing of the reels in drypack upon request. Dimensions (mm) Reel 330 mm diameter 300 ±2 60.0 +2/ 0 13.0 ±0.2 21.0 ±0.8 2.0 ±0.15 8.5 +1/ 0 12.5 +1/ 0 12.5 +1.2/ 0.2 16.5 +1.2/– 0.2 180 mm diameter A B C D E W1 (8-mm tape) (12-mm tape) W2 (8-mm tape) (12-mm tape) 180 3 60.0 +1/ 0 13.0 ±0.2 21.0 ±0.4 2.0 ±0.1 9.0 ±0.3 13.0 ±0.3 11.4 ±1 15.4 ±1 Please read Important notes and Cautions and warnings at the end of this document. Page 20 of 26 Polymer chip capacitors TOPcap - Basic Packing units and weights Case size Reel: taped; 180 mm diameter pieces/reel 2000 750 1000 Reel: taped; 330 mm diameter pieces/reel 8000 2800 3750 Approx. weight per capacitor g2) 0.07 0.30 0.25 B760 B D V 2) Guideline values, possible deviations of up to approximately ±30%. Please read Important notes and Cautions and warnings at the end of this document. Page 21 of 26 Polymer chip capacitors TOPcap - Basic B760 Test limits for polymer chip capacitors Endurance Capacitance change: ±20% of initial measured value 2000 h at +85 °C, VR Dissipation factor: