B7676

SAW Components SAW Duplexer WCDMA/LTE Band IX Series/type: Ordering code: Date: Version: B7676 August 09, 2010 1.1 © EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW Duplexer Preliminary Data Revision History Changes compared to previously issued iteration Issue 1.0 1.1 Originator S.Mochizuka S.Mochizuka B7676 1767.4 / 1862.4 MHz Detailed specification changes Date Initial release March 18, 2010 Improved design version: August 09, 2010 - Reduced Txport VSWR to 2.0 max. - Increased Tx attenuation values esp. at WLAN to 35dB and harmonics to 17dB min. - Slightly worse values for GPS - Increased Tx band isolation to 53dB min. - Increased Tx band common mode isolation to 53dB min. Please read cautions and warnings and important notes at the end of this document. 2 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Application s Low-loss SAW duplexer for mobile telephone B7676 1767.4 / 1862.4 MHz WCDMA/LTE Band IX systems Low insertion attenuation Low amplitude ripple Usable passband 35 MHz Single ended to balanced transformation in Antenna - Rx path s Impedance transformation 50Ω to 100Ω in Antenna - Rx path s s s s Features s Package size 2.5 x 2.0 mm2, 0.55 567 0.4 9 package height 0.74 mm max. 4 0.4 bottom view (SMT) 0.68 s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD) 0.9 side view 2.5 2.0 top view Pin configuration s s s s s 0.4 s RoHS compatible s Approx. weight 0.013g s Package for Surface Mount Technology 0.3 32 1 8 3 1, 8 6 2, 4, 5 7, 9 TX Input RX Output (balanced) Antenna To be grounded To be grounded 1 3 8 2,7 4,5,9 6 Please read cautions and warnings and important notes at the end of this document. 3 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: Characterisitcs TX - ANT Center frequency Maximum insertion attenuation 1749.9 ... 1784.9 MHz @fcarrier1752.4 ... 1782.4 Amplitude ripple(p-p) 1749.9 ... 1784.9 @fcarrier1752.4 ... 1782.4 Error Vector Magnitude @fcarrier1752.4 ... 1782.4 Input VSWR (TX port) 1749.9 ... 1784.9 Output VSWR (ANT port) 1749.9 ... 1784.9 Attenuation 10.0 ... 1565.42 ... 1573.374 ... 1577.466 ... 1597.5515 ... 1605.886 ... 1844.9 ... @fcarrier 1847.4 ... 1884.5 ... 2110.0 ... 2400.0 ... 3500.0 ... 5150.0 ... 5725.0 ... 1) 2) B7676 1767.4 / 1862.4 MHz T = -20˚C to +85 ˚C ZANT= 50 Ω || 4.1 nH ZRX = 100 Ω (balanced) || 8.2 nH ZTX = 50 Ω min. fC — typ. @ 25 ˚C 1767.4 1.4 αWCDMA1) 1.3 0.4 αWCDMA1) EVM2) 0.3 1.3 1.6 1.6 α 30 35 36 37 39 25 45 45 40 27 35 20 17 15 38 38 39 39 42 32 50 51 42 40 41 31 21 19 max. — 1.9 1.8 0.9 0.8 2.0 2.0 2.0 dB dB dB dB dB dB dB dB dB dB dB dB dB dB MHz dB dB dB dB % MHz MHz MHz MHz MHz MHz 1565.42 1573.374 1577.466 1585.42 1605.886 1680.0 1879.9 1877.4 1919.6 2170.0 2500.0 3570.0 5355.0 5850.0 MHz MHz MHz MHz MHz MHz MHz MHz αWCDMA1) MHz MHz MHz MHz MHz MHz Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 4 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: Characterisitcs ANT - RX Center frequency Maximum insertion attenuation 1844.9 ... 1879.9 @fcarrier1847.4 ... 1877.4 Amplitude ripple(p-p) 1844.9 ... 1879.9 @fcarrier1847.4 ... 1877.4 fC MHz MHz αWCDMA1) MHz T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 4.1 nH ZRX = 100 Ω (balanced) || 8.2 nH ZTX = 50 Ω min. — typ. @ 25 ˚C 1862.4 2.0 1.9 0.6 0.5 232) 28 1.5 1.5 α MHz MHz MHz αWCDMA1) MHz MHz MHz 35 48 48 15 30 35 54 54 55 52 52 42 dB dB dB dB dB dB 2.0 2.0 max. — 2.4 2.4 0.8 0.8 MHz dB dB dB dB dB B7676 1767.4 / 1862.4 MHz MHz αWCDMA1) Common Mode Rejection Ratio CMRR 1844.9 ... 1879.9 MHz Input VSWR (ANT port) 1844.9 ... 1879.9 Output VSWR (RX port) 1844.9 ... 1879.9 Attenuation 10.0 ... 1750.0 1749.9 ... 1784.9 @fcarrier1752.4 ... 1782.4 1965.0 ... 2400.0 2400.0 ... 2484.0 2484.0 ... 5650.0 IMD Product Level Limits3) at fTX = 1749.9~1784.9 MHz Blocker 1 95.0 Blocker 2 1672.4 Blocker 3 3629.8 Blocker 4 5397.2 1) 2) 3) MHz MHz MHz MHz MHz MHz -130 -123 -124 -129 -105 -108 -105 -108 dBm dBm dBm dBm Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7). A combination of 10o phase balance and 1dB amplitude balance corresponds to 19.6 dB CMRR. IMD product level limits for power levels PTX=21.5dB (antenna port output power) and PBLOCKER=-15dBm (antenna port input power). Please read cautions and warnings and important notes at the end of this document. 5 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 4.1 nH ZRX = 100 Ω (balanced) || 8.2 nH ZTX = 50 Ω B7676 1767.4 / 1862.4 MHz Characterisitcs TX - RX Differential Mode Isolation 1749.9 ... 1784.9 @fcarrier1752.4 ... 1782.4 1844.9 ... 1879.9 @fcarrier1847.4 ... 1877.4 Common Mode Isolation 1749.9 ... 1784.9 @fcarrier1752.4 ... 1782.4 1) min. α MHz MHz αWCDMA1) MHz MHz αWCDMA1) α MHz MHz αWCDMA1) typ. @ 25 ˚C 55 56 54 55 56 56 max. 52 53 50 50 53 53 dB dB dB dB dB dB Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7). Please read cautions and warnings and important notes at the end of this document. 6 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Maximum ratings Storage temperature range DC voltage ESD voltage Input power at 1749.9 ... 1784.9 MHz elsewhere Tstg VDC VESD PIN –40/+85 5 501) 29 10 ˚C V V dBm dBm B7676 1767.4 / 1862.4 MHz machine model, 10 pulses source and load impedance 50 Ω continuous wave T = 50˚C, 5,000 h } 1) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∫∞ Sds 21 ( f ) HRRC ( f – f Carrier ) ∞ 2 df fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 9-Passband, fCarrier ranges from 1752.4 MHz (lowest Tx channel) to 1782.4 MHz (highest Tx channel). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∫∞ HRRC ( f ) ∞ 2 df = 1 Please read cautions and warnings and important notes at the end of this document. 7 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Frequency Response Tx-ANT (passband) B7676 1767.4 / 1862.4 MHz Frequency Response Tx-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 8 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Frequency Response ANT-Rx (passband) B7676 1767.4 / 1862.4 MHz Frequency Response ANT-Rx (wideband) Please read cautions and warnings and important notes at the end of this document. 9 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Frequency Response Tx-Rx (passband) / Differential Mode B7676 1767.4 / 1862.4 MHz Frequency Response Tx-Rx (wideband) / Differential Mode Please read cautions and warnings and important notes at the end of this document. 10 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Frequency Response Tx-Rx (passband) / Common Mode B7676 1767.4 / 1862.4 MHz Frequency Response Tx-Rx (wideband) / Common Mode Please read cautions and warnings and important notes at the end of this document. 11 August 09, 2010 SAW Components SAW Duplexer Preliminary Data Return Loss S11 Tx - port S22 ANT - port S33 Rx - port B7676 1767.4 / 1862.4 MHz Please read cautions and warnings and important notes at the end of this document. 12 August 09, 2010 SAW Components SAW Duplexer Preliminary Data References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible C61157-A3-A61 F61074-V8153-Z000 L_1126 B7676_NB.s4p, B7676_WB.s4p see file header for port/pin assignment table S_6001 defined as compatible with the following documents: B7676 B7676 1767.4 / 1862.4 MHz "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm Matching coils For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 13 August 09, 2010 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 14 August 09, 2010