B82422-A3829

SMT Inductors, SIMID Series SIMID 1210-100 Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µH Rated current 65 to 800 mA Construction ■ Ceramic or ferrite core ■ Laser-welded winding ■ Flame-retardant encapsulation B82422-A****-+100 Features ■ ■ ■ ■ Very wide temperature range (up to 145 °C) High Q factor High resonance frequency Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Terminals ■ ■ ■ ■ ■ Electro-plated 0,4 µm Cu, 1–2 µm Ag, 5–7 µm Sn Base material CuSn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking Marking on component: Manufacturer, L value (in nH) and tolerance of L value (coded), date of manufacture (coded) Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel For details on taping, packing and packing units see page 153 99 04/00 SMT Inductors, SIMID Series SIMID 1210-100 General technical data Rated inductance L R Q factor Qmin Rated current IR B82422-A****-+100 Measured with impedance analyzer HP 4194A at frequency fL Measured with impedance analyzer HP 4194A/HP 4291A at frequency fQ Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 125 °C Measured with network analyzer HP 8753 Measured at 20 °C ambient temperature, measuring current < IR In accordance with IEC 60068-1 55/125/56 (– 55 °C/+ 125 °C/56 days damp heat test) In accordance with IEC 60068-2-58 (215 ± 3) °C, (3 ± 0,3) s Wetting of soldering area: ≥ 90 % In accordance with IEC 60068-2-20 260 °C, 10 s ∆L /L ≤ ± 3 % 2 mm (100 mm long standard PCB) Approx. 50 mg Self-resonance frequency fres, min DC resistance R max Climatic category Solderability Resistance to soldering heat Permissible PCB bending Weight 100 04/00 SMT Inductors, SIMID Series SIMID 1210-100 Dimensional drawing 0,5±0,2 1) B82422-A****-+100 2±0,1 1) 3,2+0,3 2±0,1 0,15 max. 2,5+0,3 Marking 1) Soldering area, tinned IND0063-T-E Layout recommendation B C D B SSB1227-Z Dimensions (mm) A Wave soldering Reflow soldering 2,3 2,7 A B 1,60 1,15 C 2,1 2,1 0,4 min.1) D 5,3 4,4 101 04/00 SMT Inductors, SIMID Series SIMID 1210-100 Characteristics and ordering codes LR µH 0,0082 0,010 0,012 0,015 0,018 0,022 0,027 0,033 0,039 0,047 0,056 0,068 0,082 0,10 0,12 0,15 0,18 0,22 0,27 0,33 0,39 0,47 0,56 0,68 0,82 Tolerance1) ±5% ^J ± 10 % ^K fL MHz 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 Qmin fQ MHz 100 100 100 100 100 100 50 50 50 50 50 50 50 50 30 30 30 30 30 30 30 30 30 30 30 IR mA 800 750 700 640 640 600 600 540 530 510 500 480 450 440 400 390 360 280 235 200 190 150 150 145 140 Rmax Ω 0,08 0,09 0,10 0,12 0,12 0,14 0,14 0,17 0,18 0,19 0,20 0,21 0,24 0,26 0,32 0,33 0,38 0,64 0,90 1,3 1,4 2,2 2,2 2,4 2,5 fres, min MHz 4000 4000 3500 3000 2500 2500 1850 1700 1450 1350 1200 1150 1050 1000 880 850 800 700 650 580 540 480 400 280 240 B82422-A****-+100 Ordering code 2) (∅ 180-mm reel) B82422-A3829-+100 B82422-A3100-+100 B82422-A3120-+100 B82422-A3150-+100 B82422-A3180-+100 B82422-A3220-+100 B82422-A3270-+100 B82422-A3330-+100 B82422-A3390-+100 B82422-A3470-+100 B82422-A3560-+100 B82422-A3680-+100 B82422-A3820-+100 B82422-A3101-+100 B82422-A3121-+100 B82422-A3151-+100 B82422-A3181-+100 B82422-A3221-+100 B82422-A3271-+100 B82422-A3331-+100 B82422-A3391-+100 B82422-A3471-+100 B82422-A3561-+100 B82422-A3681-+100 B82422-A3821-+100 Core material: ceramics 20 20 25 27 30 30 23 20 25 26 26 27 27 25 22 25 25 25 20 22 22 22 22 22 22 1) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size ∅ 330 mm append code number »8«. Example: B82422-A3829-K108 102 04/00 SMT Inductors, SIMID Series SIMID 1210-100 Characteristics and ordering codes (continued) LR µH 1,0 1,2 1,5 1,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance1) ±5% ^J ± 10 % ^K fL MHz 1 1 1 1 1 1 1 1 1 1 1 1 1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1 Qmin fQ MHz 7,96 7,96 7,96 7,96 7,96 7,96 7,96 7,96 7,96 7,96 7,96 7,96 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 2,52 IR mA 380 370 340 290 270 240 200 190 150 140 135 130 180 175 165 155 140 120 105 90 85 85 80 70 65 Rmax Ω 0,34 0,37 0,50 0,60 0,75 0,88 1,20 1,40 2,20 2,60 2,80 3,00 1,60 1,65 1,85 2,00 2,65 3,70 4,50 6,30 7,00 6,75 7,70 10,0 11,5 fres, min MHz 320 300 270 250 125 110 110 110 110 100 90 90 25 23 20 17 16 15 13 12 11 9 9 8 7 B82422-A****-+100 Ordering code 2) (∅ 180-mm reel) B82422-A1102-+100 B82422-A1122-+100 B82422-A1152-+100 B82422-A1182-+100 B82422-A1222-+100 B82422-A1272-+100 B82422-A1332-+100 B82422-A1392-+100 B82422-A1472-+100 B82422-A1562-+100 B82422-A1682-+100 B82422-A1822-+100 B82422-A1103-+100 B82422-A1123-+100 B82422-A1153-+100 B82422-A1183-+100 B82422-A1223-+100 B82422-A1273-+100 B82422-A1333-+100 B82422-A1393-+100 B82422-A1473-+100 B82422-A1563-+100 B82422-A1683-+100 B82422-A1823-+100 B82422-A1104-+100 Core material: ferrite 20 20 20 25 25 25 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 1) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance. For reel size ∅ 330 mm append code number »8«. Example: B82422-A1102-K108 103 04/00 SMT Inductors, SIMID Series SIMID 1210-100 Impedance |Z | versus frequency f measured with impedance analyzer HP 4291A 10 5 SSB1539-7 B82422-A****-+100 Inductance L versus dc load current IDC measured with LCR meter HP 4275A Ω |Z | 10 4 10 3 10 2 10 1 100 µ H 10 µ H 1 µH 100 nH 10 nH 10 4 10 5 kHz 10 6 f 10 0 10 _1 10 3 Q factor versus frequency f measured with impedance analyzer HP 4194A / HP 4291A Current derating Iop/IR versus ambient temperature TA 1,2 IΙ B op IΙR R SSB1450-B 1,0 0,8 0,6 0,4 0,2 0 0 20 40 60 80 100 120 C 160 TA 104 04/00 Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 (  EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89  EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. (