B82422H1104K

SMT inductors SIMID series, SIMID 1210-H Series/Type: B82422H Date: February 2020 Data Sheet ¤TDK Electronics AG 2020. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics’ prior express consent is prohibited. SMT inductors, SIMID series B82422H SIMID 1210-H Size 1210 (EIA) or 3225 (IEC) Rated inductance 1 ... 680 μH Rated current 61 ... 1150 mA Construction ■ Ferrite drum core ■ Laser-welded winding ■ Flame-retardant molding Features Temperature range up to +150 °C Very high current handling capability Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020D ■ RoHS-compatible ■ ■ ■ ■ Applications ■ Filtering of supply voltages, coupling, decoupling ■ DC/DC converters, switch-mode power supplies ■ Automotive electronics (e.g. single wire bus systems) Terminals ■ Base material CuSn6 ■ Layer composition Cu, Ag, Sn (lead-free)1) ■ Electro-plated Marking ■ Marking on component: Manufacturer and letter “H”, L value (in PH), tolerance of L value (coded), date of manufacture (YWWD) ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing units ■ 8-mm blister tape, wound on 180-mm or 330-mm ‡ reel ■ Packing units: 180-mm reel: 2000 pcs./reel 330-mm reel: 7500 pcs./reel 1) Ni-barrier-plated terminals on request (B82422H*50). Please read Cautions and warnings and Important notes at the end of this document. 2 02/20 SMT inductors, SIMID series B82422H SIMID 1210-H Dimensional drawing and layout recommendation A B C D 2.7 1.15 2.1 4.4 Dimensions in mm Taping and packing Blister tape Reel A Please read Cautions and warnings and Important notes at the end of this document. 3 02/20 330 mm reel 180.0 +0/–3 330.0 r2.0 C 13.0 +0.5/–0.2 13.0 +0.5/–0.2 N 60.0 r1.0 W1 Dimensions in mm 180 mm reel W2 8.4 +1.5/–0 14.4 max 75.0 +1.0/–3.0 8.4 +1.5/–0 14.4 max SMT inductors, SIMID series B82422H SIMID 1210-H Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A and test fixture Agilent 16034H or equivalent at frequency fL, RMS voltage 0.1 V, +(23 r5) °C Q factor Qmin Measured with impedance analyzer Agilent 4294A and test fixture Agilent 16034H or equivalent at frequency fQ, RMS voltage 0.1 V, +(23 r5) °C Rated temperature TR +105 qC Rated current IR Maximum permissible DC with temperature increase of d 45 K at rated temperature Saturation current Isat Maximum permissible DC with inductance decrease 'L/L0 of approx. 30% at +(23 r5) °C Self-resonance frequency fres,min Measured with impedance analyzer Agilent 4294A / E4991A or equivalent at +(23 r5) °C DC resistance Rmax Measured with Burster Resitomat 2329 at +(23 r5) °C Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (5 r0.3) s Wetting of soldering area t 90% (based on IEC 60068-2-58) Resistance to soldering heat +260 qC, 40 s (as referenced in JEDEC J-STD 020D) Climatic category 55/150/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +150 °C Packaged: –25 °C … +40 °C, d 75% RH Weight Approx. 50 mg Please read Cautions and warnings and Important notes at the end of this document. 4 02/20 SMT inductors, SIMID series B82422H SIMID 1210-H Characteristics and ordering codes Tolerance LR PH 1.0 fL, fQ Qmin MHz r10% Isat,typ Isat,min IR Rmax mA mA mA : fres,min Ordering code 1)2) MHz (‡ 180-mm reel) 7.96 8 1835 1620 1150 0.10 150 B82422H1102K000 1.5 7.96 8 1520 1375 960 0.13 110 B82422H1152K000 2.2 7.96 8 1350 1220 890 0.15 90 B82422H1222K000 3.3 7.96 8 1150 1040 790 0.18 70 B82422H1332K000 4.7 7.96 8 905 815 700 0.27 46 B82422H1472K000 7.96 8 770 690 580 0.35 35 B82422H1682K000 2.52 12 620 560 500 0.48 30 B82422H1103+000 2.52 12 535 480 390 0.72 26 B82422H1153+000 22 2.52 12 440 390 340 1.0 21 B82422H1223+000 33 2.52 12 340 300 280 1.5 15 B82422H1333+000 47 2.52 12 295 265 230 2.1 12 B82422H1473+000 68 2.52 12 250 225 190 3.2 10 B82422H1683+000 100 0.796 15 195 170 150 4.6 8.0 B82422H1104+000 150 0.796 15 165 140 130 7.0 6.0 B82422H1154+000 220 0.796 15 140 120 110 10.0 5.5 B82422H1224+000 330 0.796 15 115 100 90 14.0 4.5 B82422H1334+000 470 0.796 15 100 85 76 20.0 3.5 B82422H1474+000 680 0.796 15 75 65 61 30.0 3.0 B82422H1684+000 6.8 10 r5% 15 r10% ^ J ^ K Intermediate values and closer tolerances on request. Higher currents possible at temperatures