B82422H1472M000

SMT inductors SIMID series, SIMID 1210-H Series/Type: Date: B82422H October 2008 7f…fÁRspp… 7f…fÁRspp… © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SMT inductors, SIMID series SIMID 1210-H Size 1210 (EIA) or 3225 (IEC) Rated inductance 0.1 NH to 680 NH Rated current 61 mA to 2050 mA Construction ■ Ferrite drum core ■ Laser-welded winding ■ Flame-retardant molding B82422H Features Temperature range up to 150 °C Very high current handling capability Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020C ■ RoHS-compatible ■ ■ ■ ■ Applications ■ ■ ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling DC/DC converters, switch-mode power supplies Automotive electronics (e.g. single wire bus systems) Telecommunications Consumer and data processing equipment Industrial electronics Terminals ■ Base material CuSn6 ■ Layer composition Cu, Ag, Sn (lead-free)1) ■ Electro-plated Marking ■ Marking on component: Manufacturer and letter “H”, L value (in μH), tolerance of L value (coded), date of manufacture (YWWD) ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing units ■ 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel ■ Packing units: 180-mm reel: 2000 pcs./reel 330-mm reel: 7500 pcs./reel 1) Ni-barrier-plated terminals on request (B82422H*50). Please read C autions and warnings and Important notes at the end of this document. 2 10/08 SMT inductors, SIMID series SIMID 1210-H Dimensional drawing and layout recommendation 0.6±0.2 1) 1.9±0.1 1) B82422H B C D B IND0053-6 2.2±0.2 0.45 min.1) 3.2±0.2 A 2.7 B 1.15 A C 2.1 D 4.4 0.15 max. 2.5±0.2 Marking 1) Soldering area IND0496-P-E Dimensions in mm Taping and packing Blister tape 1.75±0.1 4±0.1 Component 1.5+0.1 2±0.05 Reel 14.4 max. _0 12.75 +0.15 3.5±0.05 _2 180 +0 _ < 4.2 8±0.3 _ < 2.8 4±0.1 1.0+0.2 Direction of unreeling IND0557-F-E _0 8.4 +1.5 _2 330 +0 62±1.5 IND0592-V Dimensions in mm Please read C autions and warnings and Important notes at the end of this document. 3 10/08 SMT inductors, SIMID series SIMID 1210-H Technical data and measuring conditions Rated inductance LR Q factor Qmin Rated temperature TR Rated current IR B82422H Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, 20 °C Measured with impedance analyzer Agilent 4294A at frequency fQ, 20 °C 105 °C Maximum permissible DC with inductance decrease ΔL/L0 ≤ 10% and temperature increase of ≤ 45 K at rated temperature Measured with network analyzer Agilent 8753D, 20 °C Measured at 20 °C Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s Wetting of soldering area ≥ 90% (based on IEC 60068-2-58) 260 °C, 40 s (as referenced in JEDEC J-STD 020C) 55/150/56 (to IEC 60068-1) Mounted: –55°C … +150 °C Packaged: –25 °C … +40 °C, ≤ 75% RH Approx. 50 mg Self-resonance frequency fres,min DC resistance Rmax Solderability (lead-free) Resistance to soldering heat Climatic category Storage conditions Weight Please read C autions and warnings and Important notes at the end of this document. 4 10/08 SMT inductors, SIMID series SIMID 1210-H Characteristics and ordering codes LR μH 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 ±5% ^ B82422H Tolerance ±20% ^ fL MHz 10 10 10 10 7.96 7.96 Qmin 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 15 15 15 fQ MHz 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 IR mA 2050 1880 1760 1650 1540 1370 1270 1120 1000 840 770 660 500 390 330 280 230 180 150 120 100 90 76 61 Rmax Ω 0.03 0.04 0.04 0.05 0.05 0.07 0.09 0.12 0.15 0.20 0.24 0.33 0.46 0.72 1.0 1.4 2.1 3.4 4.8 7.5 10.9 13.0 20.0 31.0 fres,min MHz 1000 800 600 500 400 200 150 110 90 70 46 35 30 26 21 15 12 10 Ordering code 1)2) (∅ 180-mm reel) B82422H1101M000 B82422H1151M000 B82422H1221M000 B82422H1331M000 B82422H1471M000 B82422H1681M000 B82422H1102+000 B82422H1152+000 B82422H1222+000 B82422H1332+000 B82422H1472+000 B82422H1682+000 B82422H1103+000 B82422H1153+000 B82422H1223+000 B82422H1333+000 B82422H1473+000 B82422H1683+000 M J ^ 7.96 K 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 ±10% 0.796 20 0.796 20 0.796 20 0.796 20 0.796 20 0.796 20 8.0 B82422H1104+000 6.0 B82422H1154+000 5.5 B82422H1224+000 4.5 B82422H1334+000 3.5 B82422H1474+000 3.0 B82422H1684+000 Intermediate values and closer tolerances on request. Higher currents possible at temperatures