B82432T1332K

SMT inductors SIMID series, SIMID 1812-T Series/Type: B82432T Date: June 2019 a~í~=pÜÉÉí ¤TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics’ prior express consent is prohibited. SMT inductors, SIMID series B82432T SIMID 1812-T Size 1812 (EIA) or 4532 (IEC) Rated inductance 1 ... 1000 μH Rated current 70 ... 1300 mA Construction ■ Upright ferrite drum core ■ Laser-welded winding ■ Flame-retardant molding Features Temperature range up to +150 °C High current handling capability Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020D ■ RoHS-compatible ■ ■ ■ ■ Applications ■ ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling DC/DC converters Automotive electronics (e.g. single-wire bus systems) Telecommunications Industrial electronics Terminals ■ Base material CuSn6 ■ Layer composition Cu, Ag, Sn (lead-free)1) ■ Electro-plated Marking ■ Marking on component: Manufacturer and letter “T”, L value (in PH), tolerance of L value (coded), date of manufacture (YWWD) ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing unit ■ 12-mm blister tape, wound on 330-mm ‡ reel ■ Packing unit: 2500 pcs./reel 1) Ni-barrier-plated terminals on request (B82432T*50). Please read Cautions and warnings and Important notes at the end of this document. 2 06/19 SMT inductors, SIMID series B82432T SIMID 1812-T Dimensional drawing and layout recommendation A B C D 3.6 1.3 3.2 5.8 Dimensions in mm Taping and packing Blister tape Reel Dimensions in mm Please read Cautions and warnings and Important notes at the end of this document. 3 06/19 SMT inductors, SIMID series B82432T SIMID 1812-T Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A or equivalent at frequency fL, 0.1 V, +20 °C Q factor Qmin Measured with impedance analyzer Agilent 4294A or equivalent at frequency fQ, +20 °C Rated temperature TR +85 qC Rated current IR Maximum permissible DC with inductance decrease 'L/L0 d10% and temperature increase of d 40 K at rated temperature Self-resonance frequency fres,min Measured with impedance analyzer Agilent 4294A / E4991A or equivalent, +20 °C DC resistance Rmax Measured at +20 qC Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (5 r0.3) s Wetting of soldering area t90% (based on IEC 60068-2-58) Resistance to soldering heat +260 qC, 40 s (as referenced in JEDEC J-STD 020D) Climatic category 55/150/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +150 °C Packaged: –25 °C … +40 °C, d 75% RH Weight Approx. 130 mg Characteristics and ordering codes Tolerance Ordering code 1) fL ; fQ IR Rmax fres,min MHz mA : MHz 10 7.96 1300 0.08 110 B82432T1102K000 1.2 10 7.96 1200 0.10 100 B82432T1122K000 1.5 10 7.96 1150 0.11 80 B82432T1152K000 1.8 10 7.96 1050 0.13 70 B82432T1182K000 2.2 10 7.96 1000 0.15 60 B82432T1222K000 2.7 10 7.96 950 0.17 55 B82432T1272K000 3.3 10 7.96 900 0.19 50 B82432T1332K000 3.9 10 7.96 850 0.20 45 B82432T1392K000 4.7 10 7.96 800 0.22 40 B82432T1472K000 5.6 10 7.96 750 0.26 38 B82432T1562K000 6.8 10 7.96 700 0.30 36 B82432T1682K000 8.2 10 7.96 670 0.33 30 B82432T1822K000 LR Qmin PH 1.0 r10% ^ K 1) For Ni-barrier-plated terminals replace the last two digits “00” by “50”. Please read Cautions and warnings and Important notes at the end of this document. 4 06/19 SMT inductors, SIMID series B82432T SIMID 1812-T Characteristics and ordering codes Tolerance Ordering code 1) fL ; fQ IR Rmax fres,min MHz mA : MHz 10 2.52 650 0.35 25 B82432T1103K000 12 10 2.52 630 0.45 23 B82432T1123K000 15 10 2.52 600 0.50 20 B82432T1153K000 18 10 2.52 550 0.60 18 B82432T1183K000 22 10 2.52 450 0.70 15 B82432T1223K000 27 10 2.52 430 1.00 14 B82432T1273K000 33 10 2.52 400 1.20 13 B82432T1333K000 39 10 2.52 380 1.30 12 B82432T1393K000 47 10 2.52 350 1.35 11 B82432T1473K000 56 10 2.52 300 2.00 10 B82432T1563K000 68 10 2.52 250 2.50 8.0 B82432T1683K000 82 10 2.52 220 3.00 7.0 B82432T1823K000 100 20 0.796 200 3.50 6.5 B82432T1104K000 120 20 0.796 180 4.50 6.3 B82432T1124K000 150 20 0.796 160 6.00 6.1 B82432T1154K000 180 20 0.796 140 7.00 5.5 B82432T1184K000 220 20 0.796 130 7.50 4.5 B82432T1224K000 270 20 0.796 120 10.5 4.3 B82432T1274K000 330 20 0.796 120 11.0 4.1 B82432T1334K000 390 20 0.796 110 13.0 3.9 B82432T1394K000 470 20 0.796 100 15.0 3.5 B82432T1474K000 560 20 0.796 90 20.0 3.0 B82432T1564K000 680 20 0.796 80 23.0 2.6 B82432T1684K000 820 20 0.796 80 27.0 2.4 B82432T1824K000 1000 20 0.252 70 30.0 2.3 B82432T1105K000 LR Qmin PH 10 r10 % ^ K Closer tolerances on request. Higher currents possible at temperatures