0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
B82451L1005E402

B82451L1005E402

  • 厂商:

    TDK(东电化)

  • 封装:

    -

  • 描述:

    10mH Unshielded Wirewound Inductor 104 Ohm Nonstandard

  • 数据手册
  • 价格&库存
B82451L1005E402 数据手册
SMT Inductors Z-transponder coils, size 7.7 x 7.4 x 2.65 mm Series/Type: Ordering code: B82451L*E402 Date: Version: 2015-11-02 01 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 SMT Inductors (header 1 + top left bar): Identification/Classification 2 Z-transponder coils, size 7.7 x 7.4 x 2.65 mm (header 2 + bottom left header bar): Ordering code: (top right header bar) Series/Type: (bottom right header bar) B82451L*E402 Preliminary data (optional): Department: MAG IN Date: 2015-11-02 Version: 01  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SMT Inductors Z-transponder coils, size 7.7 x 7.4 x 2.65 mm B82451L*E402 Rated inductance 1.0 … 10 mH Sensitivity 7 … 23 mV/µT Construction ■ ■ ■ Ferrite core Injection moulded base Winding laser welded to terminals Features ■ ■ ■ ■ Ruggedized design to pass drop testing AEC-Q200 qualified Suitable for lead-free reflow soldering RoHS-compatible Applications ■ ■ Car access system PEPS (Passive Entry, Passive Start) RFID (radio-frequency identification) systems at 125 kHz Terminals ■ ■ Base material CuSn6 Plating:annealed Sn Marking ■ ■ Marking on component: L value in nH, “E402”, date of manufacture (YWWD) Minimum data on reel: Manufacturer, L value, ordering code, quantity, date of packing Delivery mode and packing unit ■ ■ 16-mm blister tape, wound on 330-mm Ø reel Packing unit: 1500 pcs./reel MAG IN Please read Cautions and warnings and Important notes at the end of this document. 2015-11-02 Page 2 of 6 SMT Inductors Z-transponder coils, size 7.7 x 7.4 x 2.65 mm B82451L*E402 Dimensional drawing and layout recommendation All dimensions in mm Tolerances ±0.2 mm unless otherwise noted. Taping All dimensions in mm MAG IN Please read Cautions and warnings and Important notes at the end of this document. 2015-11-02 Page 3 of 6 SMT Inductors Z-transponder coils, size 7.7 x 7.4 x 2.65 mm B82451L*E402 Technical data and measuring conditions Rated inductance LR and tolerance Sensitivity Styp Measured with LCR meter Agilent 4284A at frequency fL, 0.5 V, +20 °C Measured with Agilent 4294A at frequency fQ, RMS voltage 500 mV, +20 °C Measured with Helmholtz coil test setup at 125 kHz Self resonance frequency fres,typ Measured with HP8753 DC resistance Rtyp Measured at +20 °C Solderability (lead-free) Resistance to soldering heat Dip and look method Sn95.5Ag3.8Cu0.7: +(245 ±5) °C, (3 ±0.3) s Wetting of soldering area ≥ 90% (based on IEC 60068-2-58) +260 °C, 40 s (as referenced in J-STD-020D) Operating temperature range −40 °C to 85 °C (including self-temperature rise) Inductance drift over operating temperature range and after 3 reflow cycles and life tests (2000hrs @125°C, 2000 Thermal Shocks, 2000hrs 85°C/85%r.h.) Climatic category < ±3%, reference temperature +20 °C Storage conditions Mounted: –55 °C … +85 °C Packaged: –25 °C … +40 °C, ≤ 75% RH Approx. 1.0 g Q factor Qmin Weight 40/85/56 (to IEC 60068-1) Characteristics and ordering codes LR 55 Styp (±20%) mV/µT 7 fres,typ (±20%) MHz 3.0 Rtyp (±20%) Ω 9.0 B82451L1004E402 2.36 55 11 2.2 20.0 B82451L2364E402 4.66 58 16 1.2 38.5 B82451L4664E402 4.75 58 16 1.2 40.3 B82451L4754E402 4.81 58 16 1.2 40.7 B82451L4814E402 7.8 50 20 0.90 84.5 B82451L7804E402 10.0 50 23 0.85 104.0 B82451L1005E402 Tolerance mH 1.0 fL, fQ, fS Qtyp (±20%) kHz ±3% 125 MAG IN Please read Cautions and warnings and Important notes at the end of this document. Ordering code 2015-11-02 Page 4 of 6 Cautions and warnings Please note the recommendations in our data book (latest edition) and in the data sheets. - Particular attention should be paid to the derating curves given there. - The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or glued on joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. The following points must be observed if the components are potted in customer applications: - Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. - It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. - The effect of the potting material can change the high-frequency behaviour of the components. Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. MAG IN Please read Cautions and warnings and Important notes at the end of this document. 2015-11-02 Page 5 of 6 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdkelectronics.tdk.com/trademarks. Release 2018-10 Page 6 of 6
B82451L1005E402 价格&库存

很抱歉,暂时无法提供与“B82451L1005E402”相匹配的价格&库存,您可以联系我们找货

免费人工找货