B82792-C0475-N365

Jump to preceding page Chokes for Data and Signal Lines Double Chokes Rated voltage 42 Vac/80 Vdc Rated current 100 to 600 mA Rated inductance 4,7 to 50 mH Construction s Current-compensated ring core choke with ferrite core s Bifilar winding B82792-C0 Features s Case flame-retardant as per UL 94 V-0 s Suitable for reflow soldering Anwendungen s Suppression of asymmetrical interference coupled in on lines, whereas data signals up to some MHz can pass unaffectedly s Telecom interfaces s ISDN systems Terminals s Tinned Marking Manufacturer, ordering code, date of manufacture (month, year) Delivery mode Blister tape, reel packing For details on taping, packing and packing units see page 302 257 04/00 Chokes for Data and Signal Lines Double Chokes Dimensional drawing _ 0,05 0,6 +0,1 B82792-C0 2,5±0,2 3 x 2,5±0,1 11,5 max. 7,3 max. 2˚...8 ˚ A 14±0,4 Marking Beschriftung 0,4 +0,1 _ 0,05 10,5 max. max. 0,1 A SSB1453-1 Layout recommendation 1,6 9 15 SSB1484-V 3 x 2,5 258 04/00 Chokes for Data and Signal Lines Double Chokes General technical data Rated voltage VR Rated current IR Rated inductance LR 42 Vac (50/60 Hz) 80 Vdc B82792-C0 Referred to 50 Hz and 60 °C ambient temperature Measured with HP 4275A at 10 kHz and10 mV (specified per winding) – 30/+ 50 % < 10 % at dc magnetic bias with IR Measured at 10 kHz and 10 mV Typical values, measured at 20 °C ambient temperature (215 3) ˚C, (3 0,3) s wetting of soldering area ≥ 95 % in accordance with IEC 60068-2-58 40/125/56 (– 40 °C/+ 125 °C/56 days damp heat test) in accordance with IEC 60068-1 Approx. 2 g Inductance tolerance Inductance decrease ∆L/L0 Stray inductance LS DC resistance Rtyp Solderability Climatic category Weight Characteristics and ordering codes LR mH 4,7 6,8 10 22 33 50 LS, typ nH 500 500 600 800 1500 1700 IR mA 600 600 500 200 100 100 Rtyp Ω 0,4 0,5 1,1 1,6 2,0 2,6 VT Vdc, 2 s 1000 750 750 750 750 750 Ordering code B82792-C0475-N365 B82792-C0685-N365 B82792-C0106-N365 B82792-C0226-N365 B82792-C0336-N365 B82792-C0506-N365 259 04/00 Chokes for Data and Signal Lines Double Chokes Insertion loss αe (typical values at Z = 50 Ω) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) B82792-C0475-N365 50 dB αe SSB1425-V B82792-C0 B82792-C0685-N365 50 dB αe SSB1426-4 40 40 30 30 20 20 10 10 0 _2 10 10 _1 10 0 10 1 MHz 10 2 f 0 _2 10 10 _1 10 0 10 1 MHz 10 2 f B82792-C0226-N365 B82792-C0106-N365 50 dB αe SSB1427-C 60 αe SSB1428-K dB 50 40 40 30 30 20 20 10 10 0 _2 10 10 _1 10 0 10 1 MHz 10 2 0 _2 10 10 _1 10 0 10 1 MHz 10 2 f 260 04/00 f Jump to succeding page Chokes for Data and Signal Lines Double Chokes Insertion loss αe (typical values at Z = 50 Ω) asymmetrical, all branches in parallel (common mode) symmetrical (differential mode) B82792-C0336-N365 60 αe SSB1429-T B82792-C0 B82792-C0506-N365 60 αe SSB1430-W dB 50 dB 50 40 40 30 30 20 20 10 10 0 _3 10 10 _2 10 _1 10 0 10 1 MHz 10 2 f 0 _3 10 10 _2 10 _1 10 0 10 1 MHz 10 2 f 261 04/00