B84143A0012R206

EMC filters 3-line filters for converters and power electronics Rated current 6 to 25 A Series/Type: Date: B84143A*R206 January 2006  EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited. 3-line filters for converters and power electronics Power line filters for 3-phase systems Rated voltage 480/275 V AC, 50/60 Hz Rated current 6 to 25 A Construction ■ 3-line filter ■ Metal case ■ Footprint filter B84143A*R206 Features ■ Optimized leakage current ■ Easy to install ■ Optimized for long motor cables and operation under full load ■ UL approval Applications ■ Frequency converters for motor drives, e.g. – – – – elevators pumps conveyor systems HVAC systems (heating, ventilation and air conditioning) Terminals ■ Line: Finger-safe terminal blocks ■ Load: Litz wires Marking Marking on component: Manufacturer’s logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging: Manufacturer’s logo, ordering code Upon request the dimensions as well as the fixing points of the filters can be matched to customer requirements. The dimensions shown on the following pages are also available for 1-phase systems up to 22 A. Please read Cautions and warnings and Important notes at the end of this document. 2 01/06 3-line filters for converters and power electronics Typical circuit diagram LINE B84143A*R206 LOAD L1’ L2’ L3’ L1 L2 L3 SSB1664-T Technical data and measuring conditions Rated voltage VR Rated current IR Test voltage Vtest Overload capability (thermal) Leakage current lleak Climatic category (IEC 60068-1) Approvals 480/275 V AC, 50/60 Hz Referred to 40 °C ambient temperature 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) 1.5 · IR for 3 min per hour or 2.5 · IR for 30 s per hour At 480 V AC, 50 Hz 25/100/21 (–25 °C/+100 °C/21 days damp heat test) UL 1283 Characteristics and ordering codes VR AC V 480/275 IR A 6 12 25 Terminal Ileak cross section mm2 mA 2.5 2.5 4 < 3.5 < 3.5