B8740

SAW Components SAW band–stop filter ISDB–T Series/type: Ordering code: Date: Version: B8740 B39911-B8740-P810 September 22, 2010 2.0 © EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW band–stop filter Data Sheet Revision history: changes compared to previous iteration issue ISSUE LY01A_v1.0 B8740_v1.0 B8740_v2.0 ORIGINATOR M. Jungkunz TAY Wee Chuan TAY Wee Chuan DETAILED SPECIFICATION CHANGES initial release adaption of specification for maximum and minimum insertion attenuation and suppression levels data sheet release DATE B8740 832.0 / 911.5 MHz Nov 12, 2009 Jul 12, 2010 Sept 22, 2010 Please read cautions and warnings and important notes at the end of this document. 2 September 22, 2010 SAW Components SAW band–stop filter Data Sheet Application s s s s s s B8740 832.0 / 911.5 MHz Low-loss RF band-stop filter for ISDB-T Low insertion loss Low amplitude ripple and group delay ripple Usable pass band width 300 MHz Impedance at input and output 50 Ω Unbalanced to unbalanced operation Features s s s s s s s s Package size 1.4 × 1.1 × 0.4 mm3 Maximum height of 0.45 mm Package code QCT5I RoHS compatible Approximate weight 0.003 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Pin configuration s s s s s 1 2 3 4 5 Input Coupling pin Coupling pin Output Case ground 5 2 1 3 4 Please read cautions and warnings and important notes at the end of this document. 3 September 22, 2010 SAW Components SAW band–stop filter Data Sheet Characteristics (including losses in the matching network) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = +25 ˚C ± 2 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network min. Nominal center frequency fN αmin — αmax — — α 90.00 824.00 898.00 1427.90 1749.90 1920.00 ... 222.00 MHz ... 840.00 MHz ... 925.00 MHz ... 1452.90 MHz ... 1784.90 MHz ... 1980.00 MHz ∆τ 770.00 MHz — 6 — 15.0 41.0 44.0 48.0 45.0 46.0 17.0 43.0 46.0 53.0 50.0 51.0 — — — — — — 1.7 2.7 1.9 3.3 1.1 1.3 — typ. @ 25 ˚C 832.0 911.5 max. — B8740 832.0 / 911.5 MHz MHz Minimum insertion attenuation 470.00 ... 770.00 MHz dB Maximum insertion attenuation 470.00 ... 710.00 ... Attenuation 710.00 MHz 770.00 MHz dB dB dB dB dB dB dB dB Group delay ripple (p-p) 470.00 ... ns Matching network (element values depend on PCB layout) Lp2 Ls1 1 2 3 4 Cs4 Ls3 Ls1 Lp2 Ls3 Cs4 = = = = 22 nH 36 nH 16 nH 0.7 pF Q factor of inductors: 40 @ 770 MHz Please read cautions and warnings and important notes at the end of this document. 4 September 22, 2010 SAW Components SAW band–stop filter Data Sheet Characteristics (including losses in the matching network) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network min. Nominal center frequency fN αmin — αmax — — α 90.00 824.00 898.00 1427.90 1749.90 1920.00 ... 222.00 MHz ... 840.00 MHz ... 925.00 MHz ... 1452.90 MHz ... 1784.90 MHz ... 1980.00 MHz ∆τ 770.00 MHz — 6 — 14.0 36.0 40.0 48.0 45.0 46.0 17.0 43.0 46.0 53.0 50.0 51.0 — — — — — — 1.7 2.7 2.2 4.2 1.1 1.3 — typ. @ 25 ˚C 832.0 911.5 max. — B8740 832.0 / 911.5 MHz MHz Minimum insertion attenuation 470.00 ... 770.00 MHz dB Maximum insertion attenuation 470.00 ... 710.00 ... Attenuation 710.00 MHz 770.00 MHz dB dB dB dB dB dB dB dB Group delay ripple (p-p) 470.00 ... ns Matching network (element values depend on PCB layout) Lp2 Ls1 1 2 3 4 Cs4 Ls3 Ls1 Lp2 Ls3 Cs4 = = = = 22 nH 36 nH 16 nH 0.7 pF Q factor of inductors: 40 @ 770 MHz Please read cautions and warnings and important notes at the end of this document. 5 September 22, 2010 SAW Components SAW band–stop filter Data Sheet B8740 832.0 / 911.5 MHz Maximum ratings Operable temperature range T Storage temperature range DC voltage ESD voltage Source power at 824 ... 840 MHz 898 ... 925 MHz 1) –30/+85 –40/+85 5 1001) ˚C ˚C V V Tstg VDC VESD machine model, 10 pulses PIN 21 dBm peak power of (W–)CDMA signal acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Transfer function Please read cautions and warnings and important notes at the end of this document. 6 September 22, 2010 SAW Components SAW band–stop filter Data Sheet Transfer function (pass band) B8740 832.0 / 911.5 MHz Transfer function (wide band) Please read cautions and warnings and important notes at the end of this document. 7 September 22, 2010 SAW Components SAW band–stop filter Data Sheet References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible B8740 B39911-B8740-P810 C61157-A8-A33 F61074-V8212-Z000 L_1126 LY01A_WB_UN.s4p (unmatched) LY01A_WB.s2p (matched) S_6001 defined as compatible with the following documents: B8740 832.0 / 911.5 MHz "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm Matching coils For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 September 22, 2010 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 9 September 22, 2010