B88069X2601B502

Surge Arrester 3-Electrode-Arrester EK4-A230XF1 Ordering code: B88069X2601B502 DC spark-over voltage 1) 2) 4) Impulse spark-over voltage 4) at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs Service life 10 operations 10 operations Capacitance at 1 MHz 4) Transverse delay time 3) Arc voltage at 1 A Glow to arc transition current Glow voltage Weight Storage temperature Climatic category (IEC 60068-1) Marking, blue - for 99 % of measured values - typical values of distribution 50 Hz, 1 s 5) 8/20 µs 5) 230 ± 20 < 600 < 500 < 700 < 600 10 10 >1 < 1.5 < 0.2 ~ 10 ~1 ~ 80 ~ 1.4 -40 ... +90 40/ 90/ 21 EK 230 YY O EK 230 YY O - Series - Nominal voltage - Year of production - Non radioactive V % V V V V A kA GΩ pF µs V A V g °C Insulation resistance at 100 Vdc 4) 1) 2) At delivery AQL 0.65 level II, DIN ISO 2859 In ionized mode 3) Test according to ITU-T Rec. K.12 4) Tip or ring electrode to center electrode 5) Total current through center electrode, half value through tip respectively ring electrode. Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845 AB E / AB PM Page 1 of 2 Issue 01, 27.10.2003 Surge Arrester 3-Electrode-Arrester EK4-A230XF1 Ordering code: B88069X2601B502 Not to scale Dimensions in mm Non controlled document  EPCOS AG 2002. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. AB E / AB PM Page 2 of 2 Issue 01, 27.10.2003