B9034

SAW Components SAW Rx Filter PCS / WCDMA Band II Series/Type: Ordering code: Date: Version: B9034 B39202-B9034-E210 Nov 29, 2005 1 © EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components Low-Loss Filter for Mobile Communication Data Sheet Application s Low-loss RF filter for mobile telephone B9034 1960.0 MHz PCS systems, receive path (RX) s Useable passband 60 MHz s Useable for antenna diversity systems s Suitable for GPRS class 1 to 12 Features Package size 2.0 x1.6 x 0.74 mm3 Package code DCS4K RoHS compliant Approx. weight 0.009 g Package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s s s s s Pin configuration s1 s3 s 2,4 Input, unbalanced Output, unbalanced To be grounded 1 3 4 2 Please read cautions and warnings and important notes at the end of this document. 2 Nov 29, 2005 Important notes Low-Loss Filter for Mobile Communication Data Sheet Characteristics with parallel matching elements Operating temperature range: Terminating source impedance: Terminating load impedance: T = –20 ˚C to +85 ˚C ZS = 50 Ω || 56 nH ZL = 50 Ω ||12 nH B9034 typ. @ 25˚C 1960.0 B9034 1960.0 MHz min. Center frequency Maximum insertion attenuation 1930.6 ... 1989.4 Amplitude ripple (p-p) 1930.6 ... 1989.4 Input return loss 1930.6 Output return loss 1930.6 Attenuation DC 1850.6 2040.0 2070.0 4500.0 5200.0 ... ... ... ... ... ... 1850.6 1909.4 2070.0 4500.0 5200.0 6000.0 MHz MHz MHz MHz MHz MHz ... 1989.4 ... 1989.4 fC αmax MHz ∆α MHz MHz MHz α 40 46 35 35 28 18 — — — — — max. — MHz 2.7 1.2 12 11 4.4 2.9 9 8 dB dB dB dB 48 48 47 46 35 24 — — — — — — dB dB dB dB dB dB Please read cautions and warnings and important notes at the end of this document. 3 Nov 29, 2005 SAW Components Low-Loss Filter for Mobile Communication Data Sheet Characteristics with serial matching elements Operating temperature range: Terminating source impedance: Terminating load impedance: T = –20 ˚C to +85 ˚C ZS = 50 Ω + 0.8 nH ZL = 50 Ω + 0.8 nH B9034 typ. @ 25˚C 1960.0 B9034 1960.0 MHz min. Center frequency Maximum insertion attenuation 1930.6 ... 1989.4 Amplitude ripple (p-p) 1930.6 ... 1989.4 Input return loss 1930.6 Output return loss 1930.6 Attenuation DC 1850.6 2040.0 2070.0 4500.0 5200.0 ... ... ... ... ... ... 1850.6 1909.4 2070.0 4500.0 5200.0 6000.0 MHz MHz MHz MHz MHz MHz ... 1989.4 ... 1989.4 fC αmax MHz ∆α MHz MHz MHz α 40 46 35 35 28 18 — — — — — max. — MHz 2.7 1.2 11 11 4.3 2.9 9 8 dB dB dB dB 48 48 47 46 35 24 — — — — — — dB dB dB dB dB dB Please read cautions and warnings and important notes at the end of this document. 4 Nov 29, 2005 Important notes Low-Loss Filter for Mobile Communication Data Sheet Characteristics without matching elements Operating temperature range: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω ZL = 50 Ω B9034 typ. @ 25˚C 1960.0 B9034 1960.0 MHz min. Center frequency Maximum insertion attenuation 1930.6 ... 1989.4 Amplitude ripple (p-p) 1930.6 ... 1989.4 Input return loss 1930.6 Output return loss 1930.6 Attenuation DC 1850.6 2040.0 2070.0 4500.0 5200.0 1) max. — MHz fC αmax MHz ∆α MHz MHz MHz α ... ... ... ... ... ... 1850.6 1909.4 2070.0 4500.0 5200.0 6000.0 MHz MHz MHz MHz MHz MHz — — — — — 2.8 1.3 9 8 4.3 1) dB 2.8 — — dB dB dB ... 1989.4 ... 1989.4 40 46 35 35 28 18 49 49 48 46 35 24 — — — — — — dB dB dB dB dB dB 4.0 dB max. for 0 ˚C to 85 ˚C (with pcb losses deembedded) Please read cautions and warnings and important notes at the end of this document. 5 Nov 29, 2005 SAW Components Low-Loss Filter for Mobile Communication Data Sheet B9034 1960.0 MHz Maximum ratings Operable temperature range T Storage temperature range DC voltage Tstg VDC –30/+85 –40/+85 5 501) 15 ˚C ˚C V V dBm machine model, 10 pulses CW signal for 2000h at T=50 ˚C ESD voltage VESD Input Power at PCS Tx band PIN 1) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 6 Nov 29, 2005 Important notes Low-Loss Filter for Mobile Communication Data Sheet Transfer function B9034 1960.0 MHz Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 7 Nov 29, 2005 SAW Components Low-Loss Filter for Mobile Communication Data Sheet B9034 1960.0 MHz Type Ordering code Marking and Package Packaging Date Codes S-Parameters Soldering profile B9034 B39202-B9034-E210 C61157-A7-A144 F61074-V8152-Z000 L_1126 B9034_NB.s3p B9034_WB.s3p S_6001 For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 Nov 29, 2005 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 9 Nov 29, 2005