B9080

SAW Components SAW GPS Filter Series/type: Ordering code: Date: Version: B9080 B39162B9080L310 May 12, 2009 2.5 © EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components SAW GPS Filter Data Sheet Application s s s s s s s B9080 1575.42 MHz ESD robust low-loss RF GPS filter High ESD protection at the filter input Usable passband: 4 MHz Very low insertion attenuation Very high out of band selectivity Unbalanced to unbalanced operation No matching network required for operation at 50 Ω Features Package size 2.0 x 1.6 x 0.86. mm3 Package code DCS4M RoHS compatible Approximate weight 0.007 g Package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD) s s s s s 0.86 Pin configuration s1 s3 s 2,4 Input Output Case ground 1 3 4 2 Please read cautions and warnings and important notes at the end of this document. 2 May 12, 2009 SAW Components SAW GPS Filter Data Sheet Characteristics of Filter Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85˚C ZS = 50 Ω ZL = 50 Ω B9080 typ. @ 25 ˚C 1575.42 B9080 1575.42 MHz min. Center frequency fC — max. — MHz Maximum insertion attenuation αmax 1573.42 ... 1577.42 MHz Amplitude ripple (p-p) ∆α 1573.42 ... 1577.42 MHz VSWR (Input and Output) 1573.42 ... 1577.42 MHz IIP2 (2nd order Input Intercept Point) 2 tone (cw) method: P1@+22.5dBm @F1=824MHz..915MHz P2 @-0.5dBm @F2=F1+1575.42MHz P1@+21dBm @F1=824MHz..915MHz P2 @+14dBm @F2=F1+1575.42MHz P1@+20dBm @F1=1710MHz..1785MHz P2 @-13.3dBm @F2=F1+1575.42MHz P1@+20dBm @F1=1850MHz..1910MHz P2 @-13.3dBm @F2=F1+1575.42MHz IIP3 (3rd order Input Intercept Point) 2 tone (cw) method: P1@+20dBm @F1=1710MHz..1785MHz P2 @+11dBm @F2=2*F1+1575.42MHz P1@+21dBm @F1=824MHz..915MHz P2@-13.3dBm @F2=2*F1+1575.42MHz P1@+20dBm @F1=2500MHz..2570MHz P2@-13.3dBm @F2=2*F1-1575.42MHz Group delay ripple (p-p) ∆τ 1573.42 ... 1577.42 MHz — 1.2 1.5 dB — 0.1 0.4 dB — 1.35 1.8 110.5 98.0 95 95 117.8 115 111 110 — — — — dBm dBm dBm dBm 95 90 85 110 105 100 — — — dBm dBm dBm — 8 20 ns Please read cautions and warnings and important notes at the end of this document. 3 May 12, 2009 SAW Components SAW GPS Filter Data Sheet min. Attenuation 0.1 ... 824.0 824.0 ... 849.0 849.0 ... 915.0 915.0 ... 1400.0 1611.0 ... 1648.0 1648.0 ... 1710.0 1710.0 ... 1785.0 1785.0 ... 1850.0 1850.0 ... 1910.0 1910.0 ... 1980.0 1980.0 ... 2400.0 2400.0 ... 2484.0 2484.0 ... 2570.0 2570.0 ... 3900.0 3900.0 ... 4400.0 4400.0 ... 5150.0 5150.0 ... 5400.0 5400.0 ... 6000.0 ((824 - 849) + (2400 - 2484))/2 ((849 - 915) + (2400 - 2484))/2 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz α 48 50 50 48 6 45 53 46 46 46 43 43 42 33 30 15 14 10 45 45 57 57 56 55 13 61 61 61 62 61 51 50 48 41 41 27 20 15 53.5 53 — — — — — — — — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB B9080 typ. @ 25 ˚C max. B9080 1575.42 MHz Please read cautions and warnings and important notes at the end of this document. 4 May 12, 2009 SAW Components SAW GPS Filter Data Sheet Maximum ratings of Filter Operable temperature range Storage temperature range DC voltage ESD voltage @ Input Contact Discharge Air Discharge Machine Model Machine Model Charge Device Model Human Body Model Input power WCDMA systems TDMA systems 1) 2) 3) 4) 5) B9080 1575.42 MHz T Tstg VDC VESD VESD VESD VESD VESD VESD PIN PIN –30/+85 –40/+85 5 ± 81) ± 152) ± 10003) ± 1002) ± 5004) ± 2005) 30 36 ˚C ˚C V kV kV V V V V dBm dBm at input pin 1 at input pin 1 at input pin 1 at output pin 3 at input and output (pin 1 and 3) at input and output (pin 1 and 3) Average, cw Peak, max. duty cycle 1:2 acc. to IEC61000-4-2 (Contact discharge, Rs = 330 R, Cs = 150 pF), 10 negative & 10 positive pulses. acc. to IEC61000-4-2 (Air discharge, Rs = 330 R, Cs = 150 pF), 10 negative & 10 positive pulses. acc. to JESD22-A115A (Machine model, Rs = 0 R, Cs = 200 pF), 10 negative & 10 positive pulses. acc. to JESD22-C101 (Charge device model) acc. to JESD22-A114 (Human body model, Rs = 1500 R, Cs = 100 pF), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 5 May 12, 2009 SAW Components SAW GPS Filter Data Sheet Transfer function (passband) B9080 1575.42 MHz Transfer function Please read cautions and warnings and important notes at the end of this document. 6 May 12, 2009 SAW Components SAW GPS Filter Data Sheet Smith chart / VSWR S11 function B9080 1575.42 MHz S22 function Please read cautions and warnings and important notes at the end of this document. 7 May 12, 2009 SAW Components SAW GPS Filter Data Sheet B9080 1575.42 MHz References Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible B9080 B39162B9080L310 C61157-A7-A151 F61074-V8224-Z000 L_1126 B9080_NB.s2p, B9080_WB.s2p S_6001 defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY © EPCOS AG 2009. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 May 12, 2009 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 2. 3. 4. 5. 6. 7. 9 May 12, 2009