ELS-525-892

SMD-LED 16.11.2007 Radiation green Type SMD Technology InGaN ELS-525-892 rev. 02 Case SMD 0805 1 ,2 0,4 0 ,5 Description High-power, high speed LED in standard SMD package, compact design allows for easy circuit board mounting and assembling of arrays 1,9 B a ck sid e 1,4 C a th o d e M a rk in g 1 ,2 Unit: mm Tolerance: 0,1mm 1,2 Applications Illumination, indicators, measurement applications and security systems, automation 1 ,2 0 ,9 R e c o m m e n d e d s o ld e r in g p a tte r n Absolute Maximum Ratings at Tamb = 25°C, unless otherwise specified Parameter DC forward current Peak forward current Operating temperature range Storage temperature range tp ≤ 100 µs, tp/T ≤ 0.1 Test сonditions Symbol IF IFM Tamb Tstg Value 15 30 -40 to +85 -55 to +85 Unit mA mA °C °C Electrical and Optical Characteristics at Tamb = 25°C, unless otherwise specified Test Parameter conditions Forward voltage Reverse voltage Radiant power Luminous Intensity Peak wavelength Spectral bandwidth at 50% Viewing angle Switching time IF = 15 mA IF = 100 µA IF = 15 mA IF = 15 mA IF = 15 mA IF = 15 mA IF = 15 mA IF = 15 mA Symbol VF VR Φe ΙV λp ∆λ0.5 ϕ tr , t f 5V 1.5 75 515 2.5 180 525 40 155 10/10 535 Min Typ 3.7 Max 4.5 Unit V V mW mcd nm nm deg. ns Note: All measurements carried out with EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 SMD-LED 16.11.2007 Radiant power vs. forward current (typical) normalized to ΦE @ IF= 10 mA 1,4 ELS-525-892 rev. 02 Forward current vs. forward voltage (typical) 16 14 1,2 12 1,0 10 Φe (rel.) 0,8 0,6 0,4 0,2 0,0 0 3 6 9 12 15 IF (mA) 8 6 4 2 0 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 IF (mA) UF (V) Spectral power distribution (typical) at IF = 15 mA 1,0 30 25 20 Typical wavelength shift vs. forward current (rel. to λP @ IF = 10 mA) rel. Intensity (arb. units) 0,8 Wavelength shift (nm) 15 10 5 0 -5 -10 0,6 0,4 0,2 0,0 400 450 500 550 600 650 700 -15 0 2 4 6 8 10 12 14 16 Wavelength (nm) IF (mA) Ambient Temperature vs. maximal forward current Typical radiant pattern 15 -30 0° 30° Max. forward current (mA) 10 -60 6 0° -9 0 1.0 0 .5 5 0 0.5 9 0° 1.0 v iew an gle 0 -40 -20 0 20 40 60 80 100 Ambient Temperature (°C) We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 SMD-LED 16.11.2007 ELS-525-892 rev. 02 Remarks concerning optical radiation safety* Up to maximum forward current, at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. LED Class 1 accord. DIN EN/IEC 60825-1:2001-11 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 3 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545