HG-8002JA

Crystal oscillator PROGRAMMABLE HIGH-STABILITY HIGH-FREQUENCY CRYSTAL OSCILLATOR HG-8002JA/DC series Product number (please refer to page 2) Q35 0 2 JAx x x x x x 0 0 Q34 0 2 DCx x x x x x 0 0 • • • • • • Wide frequency output by PLL technology. Low current consumption by output enable function (OE) or standby function (ST) Pin compatible with half-size oscillator SG-531. Package and pin compatible with SG-615. Low current consumption due to CMOS technology. Excellent environmental capability. HG-8002JA HG-8002DC Actual size Specifications (characteristics) Item Output frequency range Power source voltage Temperature range Max. supply voltage Operating voltage Storage temperature Operating temperature Symbol f0 VDD-GND VDD TSTG TOPR ∆f/f0 Iop IOE IST tw/ t VOH VOL N CL VIH VIL tTLH tTHL tOSC fa S.R. PT/ST Specifications ∗2 PH/SH PC/SC Remarks Refer to page 33. "Frequency range" 1.0000 MHz to 125.0000 MHz -0.5 V to +7.0 V 5.0 V ±0.25 V 3.3 V ±0.165 V -55 °C to +125 °C -20 °C to +70 °C (-40 °C to +85 °C) Stored as bare product after unpacking Refer to page 33."Frequency range" AV,BV: -20 °C to +70 °C, CX: -40 °C to +85 °C No load condition, Max. frequency range OE=GND(PT, PH, PC) ST=GND(ST, SH, SC) CMOS load: 1/2VDD level, Max. load condition TTL load: 1.4 V level, Max. load condition IOH=-16 mA(PT /ST, PH /SH),-8 mA(PC /SC) IOL= 16 mA(PT /ST, PH /SH), 8 mA(PC /SC) Frequency stability Current consumption Output disable current Standby current Duty ∗1 AV: ±20 x 10-6 BV: ±25 x 10-6 CX: ± 30 x 10-6 45 mA Max. 30 mA Max. 50 µA Max. 28 mA Max. 16 mA Max. — 40 % to 60 % High output voltage Low output voltage Output load ∗1 condition (fan out) TTL CMOS Output enable/disable input voltage CMOS level TTL level CMOS level Output fall time ∗1 TTL level Output rise time ∗1 40 % to 60 % — VDD -0.4 V Min. 0.4 V Max. 2 TTL Max. — 15 pF Max. 2.0 V Min. 0.7 x VDD Min. 0.8 V Max. 0.2 x VDD Max. — 3 ns Max. 4 ns Max. — — 3 ns Max. 4 ns Max. — 10 ms Max. ±2 x 10-6/year Max. ±2 x 10-6 Max. Max. frequency and Max. operating voltage range ST, OE terminal CMOS load: 20 %→80 % VDD level TTL load: 0.4 V→2.4 V level CMOS load: 80 %→20 % VDD level TTL load: 2.4 V→0.4 V level _ Oscillation start up time Aging Shock resistance Time at minimum operating voltage to be 0 s Ta= +25 °C, VDD = 5.0 V/3.3 V(PC/SC) Three drops on a hard board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2sine wave in 3 directions ∗1 Operating temperature(-40 °C to +85 °C), the available frequency, duty and output load conditions, please refer to page 33. ∗2 PLL - PLL connection & Jitter specification, please refer to page 53, 54. Checking possible by the Frequency Checking Program. External dimensions HG-8002JA series #4 #3 No. Pin terminal 1 2 3 4 OE or ST GND OUT VDD 9.8 Max. (Unit: mm) Recommended soldering pattern (Unit: HG-8002JA series 1.3 3.0 mm) HG-8002DC series 13.7 Max. #8 #5 No. Pin terminal 1 2 3 4 OE or ST GND OUT VDD EPSON AV 100.0000 HPH 9357B #1 14.0 Max. EPSON AV 100.0000 HPH 9357B #1 #4 8.65 6.6 #2 2.54 Min. 5.3 Max. 0.2 Min. 7.62 4.7 Max. 4.06 0.25 0.51 5.08 0.25 Min 7.62 0.51 90° to 105° 7.62 0.25 8.8 Note. OE Pin (PT, PH, PC) OE pin - "H" or "open" : Specified frequency output. OE pin - "L" : Output is high impedance. 5.08 ST pin (ST, SH, SC) ST pin - "H" or "open" : Specified frequency output. ST pin - "L" : Output is low level (weak pull - down), oscillation stops. 62