S2D13P04B00B100

S2D13P04 Multi Camera Interface ICs ■ DESCRIPTIONS The S2D13P04 is a camera interface IC designed for automotive multiple camera systems. The S2D13P04 integrates four-channel NTSC/PAL video decoders, which allow to connect four analog cameras simultaneously, and synchronously output the image data asynchronously input from the four cameras by using internal VRAM. The S2D13P04 also has image processing functions such as image composition of the four camera image data, distortion correction, and interlaced-to-progressive scan conversion. The S2D13P04 has a large-capacity VRAM built in, so it does not require an external memory. „ FEATURES z z z z *1 *2 *3 *4 Video Input x Analog Video (CVBS) Input – 4 inputs x PAL/NTSC Decoder – 4 channels x NTSC-M, NTSC-J support x PAL-M, PAL-B, PAL-G, PAL-I, PAL-N support Video Output x Digital Output 8-bit YUV422 (with HSYNC/VSYNC) ITU-R BT.656 *1 x Interlaced Output *2, 3 x Progressive Output Video Output Mode x Fixed Mode x Auto Scan Mode *4 x Merge Mode *2 x Compression Mode *2, 4 Image Processing x Image scaling function x Interlaced-to-Progressive Conversion x Distortion correction function *3, 4 z z z z z z Output at stable frame rates x 720x480i 30fps (NTSC interlaced output) x 640x480p 30fps (NTSC progressive output) x 640x480p 30fps (NTSC with distortion correction enabled) x 720x576i 25fps (PAL interlaced output) x 768x576p 25fps (PAL progressive output) x 640x480p 25fps (PAL with distortion correction enabled) Host Interface x I2C Interface (Slave) x SPI Interface (Slave) No external RAM required Operating Temperature -40 to +85 ℃ (Ta) Operating Voltages Analog: 3.3±0.3V, IO: 3.3±0.3V Core: 1.8±0.15V, PLL: 1.8±0.15V Packages ・ S2D13P04B00B100 PFBGA10UX121 (10mm×10mm×1.2mm, 0.8mm-pitch) ・ S2D13P04F00A100 QFP15-100pin (14mm×14mm×1.7mm, 0.5mm-pitch) The number of pixels per line may not comply with ITU-R BT.656 standard. In Merge Mode or Compression Mode, outputs are compatible with Interlaced output. When the distortion correction function is enabled, the interlaced output is not supported. In the Compression Mode or Auto Scan Mode, the distortion correction is not supported. ■ BLOCK DIAGRAM OSC PLL NTSC/PAL Video Decoder I2C/SPI Interface Scaler VRAM NTSC/PAL Video Decoder Scaler Video Mode Controller NTSC/PAL Video Decoder Scaler I/P Conversion NTSC/PAL Video Decoder Scaler Distortion Correction Output Format S2D13P04 „ USE CASE Front Camera Side Camera Navigation System A Analog (Composite) B A C D B Main SoC A B C C D S2D13P04 D C Side Camera Rear Camera ■ OUTPUT DATA FORMAT IMAGE ●Fixed channel mode: VGA 30fps A B C A A A A C D S2D13P04 ●Auto scan mode: VGA 30fps A D B ●Mergence mode: VGA 30fps A B A B A B A B C D C D C D C D ●Compress mode: HalfHalf-VGAx2 30fps A C A C B D B D z CONTACT YOUR SALES REPRESENTATIVE FOR THESE COMPREHENSIVE DESIGN TOOLS） x S2D13P04 Technical Documentation x S2D13P04 Evaluation Boards NOTICE: No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. ©Seiko Epson Corporation 2012, All rights reserved EPSON semiconductor website MICRODEVICES OPERATIONS DIVISION http://www.epson.jp/device/semicon_e/ IC Sales & Marketing Department 421-8 Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-42-587-5814 FAX: +81-42-587-5117 Document code: 412395701 First issue July, 2012 in Japan 2