P5203

PRODUCT DATA SHEET Digital Isolation Transformer Features ∗ ∗ ∗ ∗ ∗ ∗ Surface Mount Lead-free (Pb-free) RoHS compliant 2.5mm height IEC 60950 and UL 60950 certified UL Recognized Component P520X Applications ∗ ∗ ∗ ∗ Conexant Smart DAA™ Chipsets Digital Isolation Barrier Set Top Boxes Modems DESCRIPTION The P520X family comprises a range of transformers, designed for Conexant Smart DAA™ chipsets. They are intended, as part of the Digital Isolation Barrier, for coupling clock signals and power between chips on either side of the safety barrier. The P520X family provides Supplementary Insulation for a primary circuit at a working voltage of 250Vrms and is compliant with IEC 60950, and UL 60950. The family members are UL Recognized Components and are supported by an IEC CB certificate. The P520X family is compliant with RoHS Directive 2002/95/EC, and suitable for lead-free and conventional placement and reflow. E203175 ETALDOC 799/4 Page 1 of 4 July 2005 P520X SPECIFICATIONS Electrical Typical values at T = 25ºC, unless otherwise stated. Parameter Conditions P5200 30 160 3 0.225 0.325 2000 1.67 P5201 30 200 3 0.225 0.325 2000 1.5 P5202 30 200 3 0.225 0.325 2000 2.4 P5203 40 200 3 0.225 0.325 2000 2.6 P5204 40 200 3 0.225 0.325 2000 2.0 P5205 30 200 3 0.225 0.325 2000 1.0 Units µH nH pF Ω Ω Vrms - Shunt Inductance Lp (min) 10kHz, 100mV Leakage inductance (max) 100kHz, 100mV Interwinding capacitance (typ) DC resistance (1-2) (max) DC resistance (4-3) (max) Dielectric Rating (min) Turns ratio, N 100kHz, 100mV 4-3 : 1-2 CONSTRUCTION Dimensions Connections P520X YYWW e2 Dimensions shown are in millimetres (inches). Terminal plating JESD97 category = e2. Recommended reflow solder profile: 2 minutes @ 150-200ºC, 10 seconds @ 260ºC; time above 217ºC 60 seconds maximum. ETALDOC 799/4 Page 2 of 4 July 2005 P520X SAFETY Manufactured from materials conforming to flammability requirements of UL94V-0. Construction complies with IEC 60950-1, EN 60950-1 and UL 60950-1, supplementary insulation for a primary circuit, 250Vrms maximum working voltage. CERTIFICATION Certified by UL International Demko to IEC 60950-1:2001 (IEC CB Test Certificate No. DK-7305) for a maximum working voltage of 250Vrms, nominal mains supply voltage not exceeding 250Vrms and a maximum operating temperature of +85ºC in Pollution Degree 2 environment, supplementary insulation for a primary circuit. Recognized under the Component Recognition Program of Underwriters Laboratories Inc. to US and Canadian requirements CAN/CSA C22.2 No. 60950-1-03/UL60950-1, First Edition, based on IEC 60950-1, First Edition, maximum working voltage 250Vrms, Pollution Degree 2, supplementary insulation. UL File number E203175. Profec Technologies certifies all transformers as providing voltage isolation of 2.12kVrms, 3kV DC minimum. All shipments are supported by a Certificate of Conformity to current applicable safety standards. ABSOLUTE MAXIMUM RATINGS (Ratings of components independent of circuit). Short term isolation voltage (1s) Storage temperature Operating temperature Soldering temperature Profile peak 2.0kVrms, 2.8kVDC -40ºC to +100ºC -25ºC to +85ºC 260ºC 10s COPYRIGHT ETAL and P520x (x = 1 to 5) are Trade Marks of Profec Technologies Ltd. The Trade Mark ETAL is registered at the UK Trade Marks Registry. Smart DAA is a trademark of Conexant Systems, Inc. Profec Technologies Ltd. is the owner of the design right under the Copyright Designs and Patents Act 1988 and no rights or licences are hereby granted or implied to any third party. © 2003, 2004 Profec Technologies Ltd. Reproduction prohibited. Handle in accordance with IPC/JEDEC J-STD-033 procedure for components classified as IPC/JEDEC J-STD-020 Moisture Sensitivity Level 2. ETALDOC 799/4 Page 3 of 4 July 2005 P520X ORDERING CODE P520ÿTR TR = Tape and Reel (Blank) = Bulk in tubes. Turns ratio variant: 0 = 1.67:1 1 = 1.5:1 2 = 2.4:1 3 = 2.6:1 4 = 2:1 5= 1:1 Carrier tape width 16mm, 2500 parts per 13” reel. E203175 TRANSFORMING THE FUTURE Profec Technologies Ltd., 10 Betts Avenue, Martlesham Heath, Ipswich, IP5 3RH, England Telephone: +44 (0) 1473 611422 Fax: +44 (0) 1473 611919 Website: www.profec.com Email: info@profec.co.uk sales@profec.com ISO 9001 FM 25326 ETALDOC 799/4 Page 4 of 4 July 2005