2SD106A

CT-Concept Technology Ltd. - 2SD106A - 2 channel driver for IGBTs up to 1200V The 2SD 106A is an ultra-compact dual SCALE driver for IGBTs with blocking voltages up to 1200V. The two drive channels feature an electrical isolation between the control electronics and the power section. Each channel is equipped with a programmable Vce monitoring function for protection against short circuit and over-current. The driver supplies a gate current of +/-6A. The gate voltage is +/-15V. The integrated DC/DC converter supplies a drive power of 1 W per channel. The interface is compatible to all logic families (5...15V). The driver can be operated in two modes: either with two independent driver channels or as a half-bridge driver with internal dead-time generation. Parameter Nominal supply voltage VDC, VDD Supply current without load IDC + IDD Supply current with maximal load Last IDC + IDD Output power DC/DC converter (both channels) Efficiency DC/DC converter Delay time input to output (turn on) Delay time input to output (turn off) Peak output current (gate current) IG Output rise time Output fall time Isolation test voltage (Vac/50Hz/1min) Partial discharge extinction voltage acc. IEC270 Creep paht input to output Guaranteed dv/dt immunity (input to output) dV/dt Operating temperature 2SD106AI Operating temperature 2SD106AN min typ 15 35 max unit Vdc mA 170 2 85 300 350 -6 100 80 4000 >1200 12,7 100 -40 0 +85 +70 +6 mA W % ns ns A ns ns Vac Vpeak mm kV/µs °C °C http://local/cd-rom/english/products/2SD106/2SD106A.htm (1 von 2) [26.05.1999 22:57:33]