9812-05-00

9800 Series/Surface Mount Reed Relays SURFACE MOUNT REED RELAYS Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto’s 9800 Series is an ultra-miniature Surface Mount Reed Relay that combines small size with exceptional RF performance. 9814 extends life at ATE loads 3X or more utilizing Coto’s proprietary switch technology. The external Magnetic Shield reduces interaction between parts in high density boards. 9852 adds a form C capability. Small size plus added features allow for high density packing, and make these relays ideal for designs such as high speed, high pin count VLSI testers where speed, size and performance are all needed. SERIES FEATURES Available in Axial, Gull wing and “J” lead configurations Tape and Reel packaging available High reliability, hermetically sealed contacts for long life High Insulation Resistance - 1012 Ω minimum Coaxial shield for 50 Ω impedance. Excellent for RF and Fast Rise Time Pulse switching (up to 6 GHz) External Magnetic Shield Model 9802 Models 9814 & 9852 Dimensions in Inches (Millimeters) Gull Wing 2 Axial Axial Gull Wing 2 J-Lead 2 J-Lead 2 38 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 6 (Europe) Tel: +31-45-5439345 / Fax +31-45-5427216 9800 Series/Surface Mount Reed Relays Model Number Parameters COIL SPECIFICATIONS Nom. Coil Voltage Max. Coil Voltage Coil Resistance Operate Voltage Release Voltage CONTACT RATINGS Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy-Typical1 Static Contact Resistance (max. init.) Dynamic Contact Resistance (max. init.) RELAY SPECIFICATIONS Insulation Resistance (minimum) Capacitance - Typical Across Open Contacts 9802 Test Conditions Units VDC VDC Ω VDC - Max. VDC - Min. Volts Amps Amps Watts x 106 Ops. Ω Ω 1 Form A 50 Ω Coaxial 5 6 150 3.8 0.4 100 0.25 0.5 3 250 0.125 0.150 9814 1 Form A 50 Ω Coaxial 3.3 4 70 2.5 0.4 5 6 150 3.8 0.4 9852 1 Form C 50 Ω Coaxial 3.3 4 70 2.5 0.4 30 0.1 0.2 3 200 N/O 100N/C 0.150 0.150 5 6 110 3.8 0.4 +/- 10%, 25° C Must Operate by Must Release by Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. Max DC/Peak AC Resist. Signal Level 1.0V,10mA 50mV, 10mA 0.5V, 50mA at 100 Hz, 1.5 msec 100 0.25 0.5 3 1000 0.125 0.150 Between all Isolated Pins at 100V, 25°C, 40% RH No Shield Shield Floating Shield Guarding No Shield Shield Floating Shield Guarding Shield Guarding Contacts Open, Shield Floating Between Contacts Contacts to Shield Contacts/Shield to Coil At Nominal Coil Voltage, 30 Hz Square Wave Zener-Diode Suppression3 Ω pF pF pF pF pF pF pF pF VDC/peak AC VDC/peak AC VDC/peak AC msec. msec. x 1012 0.2 0.5 0.5 200 1500 1500 0.25 0.05 1012 0.2 0.5 0.5 200 1500 1500 0.25 0.05 109 1.0 1.0 0.5 200 1000 1000 0.26 0.26 Open Contact to Coil Closed Contact to Coil Contact to Shield Dielectric Strength (minimum) Operate Time - including bounce - Typical Release Time - Typical Top View: Dot stamped on top of relay refers to pin #1 location Notes: 1 Consult factory for life expectancy at other switching loads. Contact resistance 2.0Ω defines end of life. 2 Surface mount component processing temperature: 438°F(226°C) max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 3 Consists of 20V Zener-diode and 1N1002 diode in series, connected in parallel with coil. Environmental Ratings Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 6 E-mail: info@cotorelay.com For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 39