AG403-86

AG403-86

  • 厂商:

    ETC

  • 封装:

  • 描述:

    AG403-86 - InGaP HBT Gain Block - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
AG403-86 数据手册
AG403 InGaP HBT Gain Block The Communications Edge TM Preliminary Product Information Product Features • DC - 5000MHz • +17 dBm P1dB at 900MHz • +31 dBm OIP3 at 900MHz • 20.5 dB Gain at 900MHz • Single Voltage Supply • SOT-86 or SOT-89 SMT Package Product Description The AG403 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 900 MHz, the AG403 typically provides 20.5 dB of gain, +31 dBm Output IP3, and +17 dBm P1dB. The device combines dependable performance with consistent quality to maintain MTBF values exceeding 100 years at mounting temperatures of +85°C and is housed in a SOT-86 and SOT-89 industry standard SMT packages. The AG403 consists of Darlington pair amplifiers using the high reliability InGaP/GaAs HBT technology process technology and only requires DC-blocking capacitors, a bias resistor, and an inductive RF choke for operation. The broadband MMIC amplifier can be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, W-CDMA, and UMTS. In addition, the AG403 will work for other various applications within the DC to 5 GHz frequency range such as CATV and fixed wireless. Functional Diagram GND RF IN AG43 RF OUT GND AG403-86 GND • Internally matched to 50 Ω AG403 RF IN GND RF OUT AG403-89 Specifications Parameters1 Frequency Range S21 - Gain S11 - Input Return Loss S22 - Output Return Loss Output P1dB Output IP3 Noise Figure Device Voltage Device Current Typical Parameters Units MHz dB dB dB dBm dBm dB V mA Min Typ DC-5000 20.5 -15 -15 +17 +31 3.7 5.0 60 Max Parameter1 Frequency S21 S11 S22 Output P1dB Output IP3 Noise Figure Supply Voltage Device Current Units MHz dB dB dB dBm dBm dB V mA Typical 900 20.5 -20 -18 +17 +31 3.7 6 60 1900 19 -20 -15 +16 +29 3.8 6 60 Test conditions unless otherwise noted 1. T = 25ºC, Supply Voltage = +6 V, Rbias = 16 Ω , Frequency = 900MHz, 50 Ω System. 2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 10MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 1. Data represents typical performance in an application board with T = 25ºC, Vs = +6 V, and Rbias = 16 Ω in a 50 Ω system. Absolute Maximum Ratings Parameters Operating Case Temperature Storage Temperature Ordering Information Part No. AG403-86 AG403-89 Rating -40 to +85 °C -40 to +125 °C Description InGaP HBT Gain Block SOT-86 Style Package (Available in Tape & Reel) Operation of this device above any of there parameters may cause permanent damage Application Circuit R1 16 Ω VS = +6 V IS = 60 mA C3 Bypass Capacitor InGaP HBT Gain Block SOT-89 Style Package (Available in Tape & Reel) AG403-86PCB AG403-89PCB Fully Assembled Application Board Fully Assembled Application Board RF IN L1 RF Choke RF OUT AG403 C1 Blocking Capacitor C2 Blocking Capacitor This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002 AG403 InGaP HBT Gain Block The Communications Edge TM Preliminary Product Information AG403-86 Package Information Outline Drawing .021 ± .004 .008 ± .002 7° 0° - 8° 45° .026 ± .005 Seating Plane .085 ± .005 .037 ± .010 +.0020 .002 -.0015 .032 ± .010 (3X) .006 (Guage Plane) .105 ±.005 .100 ±.005 .060 ± .005 (.195 - .215) Land Pattern Mounting Configuration Notes This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002 AG403 InGaP HBT Gain Block The Communications Edge TM Preliminary Product Information AG403-89 Package Information Outline Drawing Land Pattern Mounting Configuration This document contains information on a new product. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com June 2002
AG403-86
1. 物料型号: - AG403-86:InGaP HBT Gain Block SOT-86 Style Package - AG403-89:InGaP HBT Gain Block SOT-89 Style Package - AG403-86PCB:Fully Assembled Application Board - AG403-89PCB:Fully Assembled Application Board

2. 器件简介: - AG403是一款通用缓冲放大器,提供高动态范围和低成本的表面贴装封装。在900MHz频率下,AG403通常提供20.5dB的增益,+31dBm的输出IP3和+17dBm的P1dB。该器件结合了可靠的性能和一致的质量,以保持在+85°C的安装温度下超过100年的MTBF值,并采用SOT-86和SOT-89行业标准的SMT封装。

3. 引脚分配: - 输入:未明确指出 - 地:未明确指出 - 输出(偏置):引脚3 - 地:引脚4

4. 参数特性: - 频率范围:DC - 5000MHz - 增益(S21):20.5dB(典型值) - 输入回波损耗(S11):-20dB(典型值) - 输出回波损耗(S22):-18dB(典型值) - 输出P1dB:+17dBm(典型值) - 输出IP3:+31dBm(典型值) - 噪声系数:3.7dB(典型值) - 供电电压:6V(典型值) - 设备电流:60mA(典型值)

5. 功能详解应用信息: - AG403由使用高可靠性InGaP/GaAs HBT技术工艺的达林顿对放大器组成,仅需要DC阻断电容器、偏置电阻和感性RF扼流圈即可运行。 - 宽带MMIC放大器可以直接应用于各种当前和下一代无线技术,如GPRS、GSM、CDMA、W-CDMA和UMTS。此外,AG403也适用于DC至5GHz频率范围内的其他各种应用,如CATV和固定无线。

6. 封装信息: - AG403提供SOT-86和SOT-89两种表面贴装技术封装。
AG403-86 价格&库存

很抱歉,暂时无法提供与“AG403-86”相匹配的价格&库存,您可以联系我们找货

免费人工找货