AH103
The Communications Edge TM Product Information
High Gain, High Linearity ½ Watt Amplifier
Outline Drawing
Product Marking
The component will be marked with an “AH103” designator followed by a four- or five-digit alphanumeric lot code on the top surface of the package. Tape and reel specifications for this part is located on the website in the “Application Notes” section.
ESD / MSL Information
ESD Classification: Value: Test: Standard: ESD Classification: Value: Test: Standard: MSL Rating: Standard: Class 1B Passes ! 500 V to < 1000 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Class IV Passes ! 1000 V Charged Device Model (CDM) JEDEC Standard JESD22-C101 Level 1 at +250 °C convection reflow JEDEC Standard J-STD-020B
Functional Pin Layout
Pin 1 2 3 4 5 6 7 8 Function Amp2 input Amp1 output / Bias Amp1 Ground RF input (Amp1 input) Ground RF output (Amp2 output) Bias Amp2 Ground
Mounting Configuration / Land Pattern
The backside paddle is the Source and should be grounded for thermal and electrical purposes. All other pins should be grounded on the PCB.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • W eb site: www.wj.com
September 2003
很抱歉,暂时无法提供与“AH103”相匹配的价格&库存,您可以联系我们找货
免费人工找货