AND190HW

AND190HW Ultra Bright LED Lamps Weight: 1.0g Unit: mm AND190HW InGaN High Brightness White Light Emission T-3 Package (10 mm) Features • New emission material (InGaN) white LED • All plastic mold type, clear colorless lens • Low drive current, (forward current = 1 to 20 mA) • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • Suitable for Outdoor Message Signboards, Automotive use. 10.0±0.2 11.0±0.3 0.5 1.5 MIN. 27.0 MIN. 13.5 ± 0.3 2.0±0.2 Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg 2.54 Cathode Index Rating 30 5 108 -40 to 85 -40 to 85 Unit mA V mW °C °C Forward Current Reverse Voltage 0.5 12 Power Dissipation Operating Temperature Range 1. Anode 2. Cathode Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Chromaticity Coordinates Full Viewing Angle Symbol VF IR IV x y θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 10 mA IF = 10 mA IV = 1/2 Peak Minimum – – 3,300 – – – Typical 3.7 – 6,000 0.33 0.34 40 Maximum 4.3 10 – – – – Unit V µA mcd degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 4/4/05 AND190HW InGaN High Brightness White Light Emission Ultra Bright LED Lamps IF – VF 50000 50 30000 Ta = 25°C IV – IF Luminous Intensity IV (mcd) 3.2 3.4 3.6 3.8 4.0 4.2 Forward Current IF (mA) 30 Ta = 25°C 10000 5000 3000 10 5 3 1000 500 0.5 1 2.8 3.0 1 3 5 10 30 50 100 Forward Voltage VF (V) Forward Current IF (mA) IV – TC 3 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity -20 0 20 40 60 80 0.8 1 0.5 0.3 0.6 0.4 0.2 0 400 0.1 Case Temperature TC (°C) 500 600 Wavelength λ (nm) 700 800 Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° Allowable Forward Current IF (mA) 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 4/4/05