AOD444

June 2004 AOD444, AOD444L (Green Product) N-Channel Enhancement Mode Field Effect Transistor General Description The AOD444 uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. This device is suitable for use in PWM, load switching and general purpose applications. AOD444L (Green Product) is offered in a lead-free package. Features VDS (V) = 60V ID = 12 A RDS(ON) < 60 mΩ (VGS = 10V) RDS(ON) < 85 mΩ (VGS = 4.5V) TO-252 D-PAK D Top View Drain Connected to Tab G S G D S Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol VDS Drain-Source Voltage VGS Gate-Source Voltage Continuous Drain Current G Pulsed Drain Current Avalanche Current C C C Maximum 60 ±20 12 12 30 12 23 20 10 2 1.3 -55 to 175 Units V V A A mJ W W °C TC=25°C TC=100°C ID IDM IAR EAR PD PDSM TJ, TSTG TC=25°C Repetitive avalanche energy L=0.1mH Power Dissipation B Power Dissipation A TC=100°C TA=25°C TA=70°C Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A Maximum Junction-to-Case B Symbol t ≤ 10s Steady-State Steady-State RθJA RθJC Typ 17.4 50 4 Max 30 60 7.5 Units °C/W °C/W °C/W Alpha & Omega Semiconductor, Ltd. AOD444, AOD444L Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter Conditions ID=10mA, VGS=0V VDS=48V, VGS=0V TJ=55°C VDS=0V, VGS=±20V VDS=VGS, ID=250µA VGS=10V, VDS=5V VGS=10V, ID=12A RDS(ON) gFS VSD IS Static Drain-Source On-Resistance VGS=4.5V, ID=6A Forward Transconductance VDS=5V, ID=12A IS=1A, VGS=0V Diode Forward Voltage Maximum Body-Diode Continuous Current TJ=125°C 1 30 47 85 67 14 0.74 1 12 450 VGS=0V, VDS=30V, f=1MHz VGS=0V, VDS=0V, f=1MHz 61 27 1.35 7.5 VGS=10V, VDS=30V, ID=12A 3.8 1.2 1.9 4.2 VGS=10V, VDS=30V, RL=2.5Ω, RGEN=3Ω IF=12A, dI/dt=100A/µs 3.4 16 2 27.6 30 35 2 10 5 540 85 60 2.4 Min 60 1 5 100 3 Typ Max Units V µA nA V A mΩ mΩ S V A pF pF pF Ω nC nC nC nC ns ns ns ns ns nC STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS IGSS VGS(th) ID(ON) Zero Gate Voltage Drain Current Gate-Body leakage current Gate Threshold Voltage On state drain current DYNAMIC PARAMETERS Ciss Input Capacitance Coss Crss Rg Output Capacitance Reverse Transfer Capacitance Gate resistance SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge Qgs Qgd tD(on) tr tD(off) tf trr Qrr Gate Source Charge Gate Drain Charge Turn-On DelayTime Turn-On Rise Time Turn-Off DelayTime Turn-Off Fall Time Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=12A, dI/dt=100A/µs A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The Power dissipation P DSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any a given application depends on the user's specific board design, and the maximum temperature fo 175°C may be used if the PCB allows it. B. The power dissipation P D is based on T J(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C: Repetitive rating, pulse width limited by junction temperature T J(MAX)=175°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using