ATC500S

ATC 500 Series BMC Broadband Microwave Millimeter-wave 0603 NPO SMT Capacitors • Low Insertion Loss • Ultra High Self Resonance • Surface Mountable • Rugged Construction ATC introduces the new 500 Series Broadband Microwave Capacitor (BMC).This unique, patented component greatly exceeds both multilayer and single layer capacitor performance. It delivers extremely low inser tion loss with ultra-high self resonance performance, in a rugged, laser-marked package compatible with automatic SMT manufacturing. Functional applications include Broadband (Bypass, Coupling, Feedback, Impedance Matching, D.C. Blocking) and Tuning. PARALLEL RESONANCE VS. CAPACITANCE 100 40 FREQUENCY (GHz) SERIES RESONANCE VS. CAPACITANCE 100 40 FREQUENCY (GHz) 20 10 20 10 CAPACITANCE (pF) (Typical) CAPACITANCE (pF) (Typical) 1 0.1 1 10 1 0.1 1 10 one norden lane, huntington station, n.y. 11746-2142 usa phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com http://www.atceramics.com ATC 001-883 Rev. C; 7/00 ATC 500 Series Broadband 0603 NPO Capacitors ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 1,000 @ 1 MHz. ENVIRONMENTAL TESTS ATC 500 S Series Broadband Microwave Capacitors are designed and manufactured to meet and exceed the applicable requirements of MIL-C-55681. TEMPERATURE COEFFICIENT OF CAPACITANCE (T.C.): 0 ±30 PPM/°C (–55°C to +125°C) (0.1 pF to 2.2 pF) 0 ±60 PPM/°C (–55°C to +125°C) (2.4 pF to 10 pF) THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. INSULATION RESISTANCE (IR): 0.1 pF to 10 pF: 105 Megohms min. @ +25°C @ rated WVDC. 104 Megohms min. @ +125°C @ rated WVDC. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts D.C. applied while subjected to an environment of 85°C with 85% relative humidity for 250 ±12 hours. WORKING VOLTAGE (WVDC): 100 WVDC (0.1 pF to 4.7 pF) 50 WVDC (5.1 pF to 10 pF) LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125°C. 200% WVDC applied. DIELECTRIC WITHSTANDING VOLTAGE (DWV): 200% of rated WVDC for 5 secs. OPERATING TEMPERATURE RANGE: From –55°C to +125°C (No derating of working voltage). TERMINATION: Chip style suitable for surface mounting. Platinum with gold flash. Die Shear Strength Test per MIL-STD-883, Method 2019. ATC 500 S BROADBAND 0603 CAPACITORS: MECHANICAL CONFIGURATIONS T MECHANICAL DIMENSIONS – INCHES (mm) L1 G L1 Length (L) W L1 .025 (.635) nom. Width (W) .030 ±.005 (.762 ±.127) Thickness (T) .024 (.609) max. Gap (G) .010 (.254) min. 1 2 .060 ±.005 (1.52 ±.127) L 2 American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com ATC 500 S Broadband 0603 NPO Capacitors C AP ACIT ANCE V ALUES CAP. CAP. CODE (pF) TOL. 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 RATED WVDC CAP. CODE 1R1 1R2 1R3 1R5 1R6 1R8 2R0 2R2 2R4 2R7 CAP. (pF) 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 TOL. RATED WVDC CAP. CODE 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 CAP. (pF) 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 TOL. RATED WVDC CAP. CODE 6R8 7R5 8R2 9R1 100 CAP. (pF) 6.8 7.5 8.2 9.1 10 TOL. C, J, K, M G, J, K, M RATED WVDC 100 B, C, D 50 A, B, C, D 100 B, C, D 100 50 ATC 500 SERIES BMC PART NUMBER CODE 500 Series Case Size S = 0603 Capacitance Code: First 2 significant digits for capacitance. R = Decimal Point Tolerance Code CAPACITANCE TOLERANCE Code Tol. A B C D G ±2% J ±5% K ±10% M ±20% ±0.25 ±.05 pF ±0.1 pF ±0.5 pF pF S 2R2 B T 100 X T Packaging T = Tape and Reel (5" Reel) Marked WVDC Termination Platinum with gold flash The above part number refers to a 500S Series (case size S) 2.2 pF capacitor, B tolerance (±0.1 pF), 100 WVDC, with marking and 5'' tape and reel packaging. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. Consult factory for additional performance data. American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com 3 Frequency Range: 50 MHZ to 26.5 GHZ 4 American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com Frequency Range: 50 MHZ to 26.5 GHZ American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com 5 Frequency Range: 50 MHZ to 26.5 GHZ 6 American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com Frequency Range: 50 MHZ to 26.5 GHZ American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com 7 ATC Engineering Design Support Engineering design assistance for all ATC products is available by phone, fax and e-mail. Our RF Engineering Group provides a high level of technical support to meet customers' application needs. Additional performance data is available for ATC’s 500 Series BMC Capacitors: Introducing ATC’s New CD Catalog • • • • Complete Data Sheets Technical Notes and Circuit Designer's Notebooks pdf Files Design Support Software – Quik Cap™, Quik Calc™, S-Parameter Files • New Design Kits • IBM/PC Compatible • ATC Website links for late-breaking news These drawings and specifications are the property of American Technical Ceramics, and any reproduction or disclosure in whole or in part as a basis for use in manufacture or sale of items is expressly prohibited without the written permission of American Technical Ceramics. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. © 1998 American Technical Ceramics Corp. ATC 001-883 Rev. C; 7/00 8 A merican Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142 phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com