AX10410A

AX10410A High Speed Data Acquisition Module 16 bits of digital I/O are available on the AX10410A. Eight bits of digital output and eight bits of digital input are brought out through the AX10410A’s 50-pin connector. APPLICATION ¥ Laboratory Automation ¥ Signal Analysis ¥ Chromatography ¥ Process Control SPECIFICATIONS Analog Input Subsystem ¥ Number of inputs: 16 S.E. or 8 D.I. ¥ Resolution: 12-bit ¥ Gain: 1, 2, 4, 8 ¥ Input Range: Unipolar: 0-1.25, 2.5, 5, 10V Bipolar : ±1.25, 2.5, 5, 10V ¥ Sampling Rate: 100KHz max. ¥ PC/104 standard expansion module ¥ Compatible with Keithley Metrabyte DAS-16G ¥ Programmable gains: 1, 2, 4 and 8 ¥ 16 Single-ended or 8 differential analog inputs with 12-bit resolution ¥ Up to 100KHz sample rate through DMA mode operation ¥ 2 channels of 12-bit D/A output ¥ 8-bit TTL/DTL compatible inputs and outputs ¥ 1 channel counter/timer ¥ Software drivers containing Basic, C, Pascal and Windows¤ 3.1, Windows¤ 95 and Windows¤ NT ¥ System Accuracy (Gain=1): ±0.03% FSR ¥ Channel Acquisition Time to –1/2 LSB Gain=1, 2, 4, 8 ¥ A/D Conversion Time: 10µs ¥ Input Impedance Off Channel: 100MΩ, 20pF On Channel: 100MΩ, 20pF ¥ Maximum Input Voltage Without Damage Power On: ±35V Power Off: ±20V ¥ Common Mode Rejection Ratio: Gain=1 : 90dB FEATURES GENERAL DESCRIPTION The AX10410A is a member of PC/104 family. This module can be installed to any PC/104 CPU boards to become a high performance data acquisition and control system. It offers five most desired functions in a PC/104 form-factor package: Analog Input, Analog Output, Digital Input, Digital Output and Counter/ Timer. The AX10410A features 8 differential or 16 singleended analog input with 12-bit resolution. The AX10410A has a maximum sample rate of 100KHz. The AX10410A provides ranges for signal level inputs of +10V, +5V, +2.5V, +1.25V for unipolar and 10V, 5V, 2.5V, 1.25V for bipolar. The transfer of data can be accomplished in 3 ways: by software trigger, interrupt service routine or DMA. In addition to its analog inputs, the AX10410A als provides two channels of 12-bit analog output. The D/A converter may be operated with internal reference voltage 5V bipolar or 0 to 10V unipolar. EPC 7-6 ¥ Integral Nonlinearity: ±1 LSB ¥ Number of Interrupts: 1 ¥ Channel of DMA: 1 or 3 Analog Output Subsystem ¥ Number of Channel: 2 ¥ Output Ranges: 5V or 0 to +10V, internal reference supplied ¥ Current Output Capacity: +5mA max. Note: All specifications are subject to change without notice. High Speed Data Acquisition Module Digital I/O Subsystem ¥ Digital Input Lines: 8 ¥ Digital Output Lines: 8 ¥ Logic Family: LSTTL ¥ Input/Output Level: TTL/DTL compatible Counter/Timer Subsystem ¥ Type: programmable interval timer counters Three 16-bit down counters ¥ Clock Input: D.C. to 10MHz ¥ Input Level: TTL, DTL, CMOS compatible ¥ Output Range: 2.5MHz to 72 minutes/pls Power Requirement ¥ +5VDC : 0.6A typ. Physical/Environmental ¥ Dimensions (L x W): 95 x 90mm ¥ Weight: 130g ¥ Relative Humidity: 20 to 90%, non-condensing ORDERING INFORMATION ¥ AX10410A High Speed Data Acquisition Module, Gains: 1, 2, 4, 8, including user's manual, utility diskette with Basic, C, Pascal and Windows drivers Screw Terminal Panel ¥ AX750 General Purpose Screw Terminal Panel, with 1 meter cable and 50-pin connector, is a convenient connection interface for A/D, D/A and DIO signal Other Terminal Panel ¥ AX752 16 Channel Amplifier & Multiplexer Panel ¥ AX757 8 Channel Relay Output & Optoisolated DI Panel Software Driver ¥ AS59099 DOS, Windows® 3.1, Windows® 95/98/NT DDL driver, and device utility (in CD-ROM) Including ActiveX control driver, 3rd party drivers (LABTECH, Labview, Dasylab), and OPC server (Note: for PCI board, DOS and Windows® 3.1 DLL driver are not avaiable) ¥ AS59080 BLOCK DIAGRAM CONNECTOR PIN ASSIGNMENT Name AI0 AI1 AI2 AI3 AI4 AI5 AI6 AI7 AGND N/C OUT0 DA0 AGND DO0 DO1 DO2 DO3 DGND DO4 DO5 DO6 DO7 +5VP ERTG DGND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 JP1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 Name AI8 AI9 AI10 AI11 AI12 AI13 AI14 AI15 N/C N/C ECLK0 DA1 AGND DI0 DI1 DI2 DI3 DGND DI4 DI5 DI6 DI7 +12VP RSVD DGND EPC 7-7 Note: All specifications are subject to change without notice.