AZ920

AZ920 ULTRA-SENSITIVE SUBMINIATURE RELAY FEATURES • Extremely small footprint utilizing only 0.16 square inch of PCB area • Thin vertical profile only 0.2" wide • Slim SIP package • 1 Form A contact with up to 5 Amp switching capability • High sensitivity, 58 mW pickup • Dielectric strength 2500 Vrms contact to coil • Epoxy sealed • UL, CUR file E43203 • TÜV file R50018790 CONTACTS Arrangement Ratings SPST (1 Form A) Single button contact or bifurcated Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 250 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 20 million operations 1 X 105 at 5 A, 30 VDC or 250 VAC 6 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 15 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 3 grams 100 per plastic tube / 1000 per carton box Rated Load UL, CUR 5 A at 30 VDC or 250 VAC General Use, 100k cycles [1] 5 A at 30 VDC or 250 VAC Resistive, 100k cycles [1] 3 A at 30 VDC or 250 VAC General Use, 75k cycles[2] 3 A at 30 VDC or 250 VAC Resistive, 75k cycles [2] [1] Single button contacts [2] Bifurcated contacts TÜV Material Silver nickel (single button or bifurcated contacts), or silver tin oxide (single button contacts), gold plating available < 50 milliohms initially Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise at nominal coil voltage Max. Solvent Temp. Max. Immersion Time Weight 58 mW (5-18 V coils) 88 mW (24 V coil) 1.3 W at 20°C (68°F) ambient 12°C (22°F) 5-18 V coils 17°C (31°F) 24 V coil Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Packing unit in pcs NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Temperature ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-06-02 Junkersstrasse 3, D-82178 Puchheim, Germany AZ920 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 Must Operate VDC 3.5 4.2 6.3 8.4 12.6 16.8 Max. Continuous VDC 16.5 19.9 29.8 39.8 59.6 65.0 Coil Resistance Ohm ± 10% 208 300 675 1,200 2,700 3,200 ORDER NUMBER* AZ920–1A–5DE AZ920–1A–6DE AZ920–1A–9DE AZ920–1A–12DE AZ920–1A–18DE AZ920–1A–24DE * Substitute “-1AB” in place of “-1A” for bifurcated silver nickel contacts. Substitute “-1AH” in place of “-1A for silver tin oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “K” for .3 inch terminal spacing. Add suffix “F” for Class F insulation. MECHANICAL DATA Standard .799 Max [20.3] .209 Max [5.3] "K" Version .799 Max [20.3] .209 Max [5.3] .138 [3.5] .504 Max [12.8] .02 [0.5] .1 [2.54] 0.4 [10.16] 0.2 [5.08] .049 [1.25] .028 [0.7] .138 [3.5] .504 Max [12.8] .035 [0.9] .012 [0.3] .02 [0.5] .1 [2.54] 0.3 [7.62] 0.3 [7.62] .049 [1.25] .028 [0.7] .035 [0.9] .012 [0.3] PCB BOARD LAYOUT Standard 2x.039 [Ø1] 2x.047 [Ø1.2] WIRING DIAGRAM "K" Version 2x.039 [Ø1] 2x.047 [Ø1.2] .1 [2.54] .4 [10.16] .2 [5.08] .1 [2.54] .3 [7.62] .3 [7.62] 1 2 3 4 Viewed Toward Terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-06-02 Junkersstrasse 3, D-82178 Puchheim, Germany