AZ957-1C-5DSE

AZ957-1C-5DSE

  • 厂商:

    ETC

  • 封装:

  • 描述:

    AZ957-1C-5DSE - SUBMINIATURE PC BOARD RELAY - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
AZ957-1C-5DSE 数据手册
AZ957 SUBMINIATURE PC BOARD RELAY FEATURES • • • • • • • Subminiature size for high density packaging DIL pitch terminals Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 96 mW pickup Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS Arrangement Ratings SPDT (1 Form C) Crossbar contacts 30 W or 62.5 VA 1 A continous 2 A (30 s, 50% duty) Max. switched voltage: 60 VDC* or 125 VAC * Note: If switching voltage is greater than 30 VDC, GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Capacitance Bounce (typical) 1.0 A at 30 VDC resistive 0.3 A at 60 VDC resistive 0.5 A at 125 VAC resistive Silver palladium, gold clad < 100 milliohms initially Minimum operations 10 million operations 1 x 105 at 0.5 A 120 VAC Res. Standard: 3 ms at nominal coil voltage Sensitive: 5 ms at nominal coil voltage 1 ms at nominal coil voltage (with no coil suppression) Coil to contact: 7.0 pF Contact to contact: 7.0 pF At 10 mA contact current 2 ms at operate 8 ms at release Resistive load: Max. switched power: Max. switched current: special precautions must be taken. Please contact the factory. Rated Load UL, CUR Material Resistance Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 400 Vrms between open contacts Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard: -40°C (-40°F) to 70°C (158°F) Sensitive: -40°C (-40°F) to 80°C (176°F) Both: -40°C (-40°F) to 105°C (221°F) 0.13" (3.3 mm) DA at 10–55 Hz 10 g P.E.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 30 seconds 2.2 grams 20 per plastic tube / 1000 per carton box COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Standard coil Sensitive coil Temperature Standard coil: 128 mW Sensitive coil: 96 mW 0.5 W at 20°C (68°F) ambient Dropout Ambient Temperature Operating Storage Vibration 33°C (59°F) at nominal coil voltage 25°C (45°F) at nominal coil voltage Max. 105°C (221°F) Shock Enclosure Terminals Max. Solder Temp. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. Solder Time Max. Immersion Time Weight Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-08-22 Junkersstrasse 3, D-82178 Puchheim, Germany AZ957 RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Coil Temperature Rise °C Nominal Coil VDC 1.5 3 5 6 9 12 24 Must. Operate VDC 1.2 2.4 4.0 4.8 7.2 9.6 19.2 Max. Continuous VDC 2.4 4.7 7.9 9.5 14.2 19.0 37.9 Coil Resistance Ohm ±10% 11.3 45.0 125 180 405 720 2,880 Standard Coil 200 mW ORDER NUMBER AZ957-1C-1.5DE AZ957-1C-3DE AZ957-1C-5DE AZ957-1C-6DE AZ957-1C-9DE AZ957-1C-12DE AZ957-1C-24DE 120 100 80 60 40 20 0 60% 70% 80% 90% 100% 110% 120% 1A 0A Percent of Nominal Coil Voltage (at 20°C) COIL SPECIFICATIONS: SENSITIVE COIL Coil Temperature Rise °C Nominal Coil VDC 1.5 3 5 6 9 12 24 Must. Operate VDC 1.2 2.4 4.0 4.8 7.2 9.6 19.2 Max. Continuous VDC 2.7 5.5 9.1 11.0 16.4 21.9 43.8 Coil Resistance Ohm ±10% 15.0 60.0 167 240 540 960 3,840 Sensitive Coil 150 mW ORDER NUMBER AZ957-1C-1.5DSE AZ957-1C-3DSE AZ957-1C-5DSE AZ957-1C-6DSE AZ957-1C-9DSE AZ957-1C-12DSE AZ957-1C-24DSE 120 100 80 60 40 20 0 1A 0A 60% 70% 80% 90% 100% 110% 120% Percent of Nominal Coil Voltage (at 20°C) MECHANICAL DATA PC BOARD LAYOUT .504MAX [12.8] .307MAX [7.8] .100 [2.54] .300 [7.62] .406MAX [10.3] .200 [5.08] .020 [0.5] .020 [0.5] 6 x ø .039 [ø 1.0] .138 [3.5] Viewed toward terminals .100 [2.54] .300 [7.62] WIRING DIAGRAM .200 [5.08] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-08-22 Junkersstrasse 3, D-82178 Puchheim, Germany
AZ957-1C-5DSE
物料型号: - AZ957-1C-1.5DE - AZ957-1C-3DE - AZ957-1C-5DE - AZ957-1C-6DE - AZ957-1C-9DE - AZ957-1C-12DE - AZ957-1C-24DE - AZ957-1C-1.5DSE - AZ957-1C-3DSE - AZ957-1C-5DSE - AZ957-1C-6DSE - AZ957-1C-9DSE - AZ957-1C-12DSE - AZ957-1C-24DSE

器件简介: AZ957是一款超小型印刷电路板继电器,具有高灵敏度(150毫瓦名义功率,96毫瓦拾取功率),DIL间距端子,适合高密度封装,环氧树脂密封,适合自动波峰焊接。

引脚分配: - SPDT(1表C)交叉杆接触点

参数特性: - 最大切换功率:30W或62.5VA - 连续最大切换电流:1A - 30秒内最大切换电流:2A(50%工作周期) - 最大切换电压:60VDC或125VAC - 额定负载UL, CUR:1.0A在30VDC电阻,0.3A在60VDC电阻,0.5A在125VAC电阻 - 材料:银钯金镀层 - 初始电阻:<100毫欧姆 - 线圈功率消耗:标准线圈128毫瓦,灵敏线圈96毫瓦 - 最大连续耗散:0.5W在20°C环境 - 温度上升:标准线圈33°C,灵敏线圈25°C - 最高温度:105°C - 机械电气寿命:最少1000万次操作 - 操作时间(典型):标准3毫秒,灵敏5毫秒 - 释放时间(典型):1毫秒 - 电容:线圈至接触点7.0皮法,接触点至接触点7.0皮法 - 回跳(典型):操作时10毫安接触电流2毫秒,释放时8毫秒 - 耐压(海平面1分钟):线圈至接触点1250Vrms,开放接触点间400Vrms - 绝缘电阻:最小100兆欧姆在20°C,500VDC,50%RH - 掉落:大于名义线圈电压的10% - 工作温度:标准线圈-40°C至70°C,灵敏线圈-40°C至80°C - 存储:-40°C至105°C - 振动:0.13英寸(3.3毫米)在10-55赫兹 - 冲击:10g - 外壳:P.E.T.聚酯 - 端子:镀锡铜合金 - 最大焊接温度:270°C - 最大焊接时间:5秒 - 最大浸泡时间:30秒 - 重量:2.2克 - 包装单位:每塑料管20个,每纸箱1000个

功能详解: AZ957继电器具有高灵敏度和高密度封装的特点,适用于需要小尺寸和高可靠性的应用场合。它能够承受高达1500V的雷电冲击,以及1000V的介电强度,满足FCC相关标准。

应用信息: 适用于需要小尺寸、高灵敏度和高可靠性继电器的应用,如通信、工业控制、汽车电子等领域。
AZ957-1C-5DSE 价格&库存

很抱歉,暂时无法提供与“AZ957-1C-5DSE”相匹配的价格&库存,您可以联系我们找货

免费人工找货