B72728A2170S162

Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination Data sheet CA06P4S17ALCGK2 B72728A2170S162 Designation System: CA 06 P 4 S...A 17 LC G K2 = Chip Array = Dimensions of the device 06x12 (Length x width in 1/100 inch) = Design (Parallel internal structure) = Number of elements = Special tolerance A of the varistor voltage = Max. operating voltage = Low Capacitance = Taped version (blister tape, 7” reel, 3000 pieces/reel) = Silver-platinum termination (Ag/Pt) Figure: l= b= s= d= e= 3,2 ± 0,2 1,6 ± 0,15 0,9 max. 0,4 ± 0,15 0,76 ± 0,15 Coplanarity < 0.1 (All dimensions in mm) As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 1/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination Data sheet CA06P4S17ALCGK2 B72728A2170S162 V-I-Characteristic: 200 V v 100 80 60 40 VAR9436A 20 10 8 6 4 2 1 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 i A 10 3 Derating Field: 10 3 A i max 10 2 i max tr 5 10 5 1 1x 10 2 10 10 0 2 3 10 4 5 10 10 6 5 ∞ 10 10 -1 10 5 100 5 1000 5 µs 10000 tr ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 2/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination Data sheet CA06P4S17ALCGK2 B72728A2170S162 Electrical Data Max. operating voltage RMS voltage DC voltage Veff = 17 V VDC = 22 V Varistor voltage (@ 1 mA) VV = 25 - 40 V Max. clamping voltage (@ 1 A) VC = 50 V Max. average power dissipation Pmax = 3 mW Max. surge current (8/20 µs) Îmax = 1 x 30 A Max. energy absorption (2 ms) Emax = 1 x 0.075 J Capacitance (@ 1MHz, 0.5 V) < 75 pF Response time < 0.5 ns Operating temperature -30 ... +85 °C Storage temperature (mounted parts) -40 ... +125 °C Termination material AgPt (thickness not specified, adjusted to fulfill wettability specification acc. to IEC 60068-2-58) Part weight 0.02 g Max. current, energy, operating voltage and average depending on ambient temperature % 100 90 80 70 60 50 40 30 20 10 0 -55 70 80 90 100 110 120 Ambient temperature 130 140 150 °C ISSUE DATE 12.07.02 ISSUE e PUBLISHER KB VS PE PAGE 3/6 Metal Oxide Varistor SMD Multilayer Varistor Array with AgPt Termination Data sheet CA06P4S17ALCGK2 B72728A2170S162 Recommended Geometry of Solder Pads E A A = 0,5 mm B = 0,7 mm C = 1,2 mm E = 0,76 mm B C Recommended Soldering Temperature Profiles 300 °C 250 T 200 150 100 max 2°C/s 50 0 0 50 100 150 t 200 s 250 ca. 225 °C 180 °C ca. 40 s ca. 100 s This component is only suited for IR-soldering at relatively low temperatures and must not be wave soldered because of dissolution of the metallization! Max. reflow temperature: 235° C, 30 sec 220° C, 45 sec. Max. reflow cycles: 2x. As far as possible, the components shall be employed within 6 months. They should be left in their original packings to avoid soldering problems due to oxidized contacts. Storage temperature: -25 to 45°C Relative humidity: