BRPG1211F

Product Guide Product 1211F Series, Bi-Color Right Angle SMT LED s Features • Bi-color right angle LED • Measures 3.0L x 2.0W x 1.0H • Same dimensions as mono-color / 1101F type • Highly reliable, space- and cost-efficient s Applications • Edge-lighting applications such as use in cellular telephones • Indicators for PCs, servers, modems, printers or scanners s Outline Dimensions Unit: mm Tolerances + 0.1 s Electro-Optical Characteristics Part No. Material Emitted Color Orange (AA) Green (PG) Yellow (AY) Green (PG) Red (BR) Green (PG) Red (BR) Yellow-Green (PY) Milky White (Ta=25°C) Wavelength Peak λp TYP. Dominant λd TYP. Spectral Line Half Width ∆λ TYP. IF Lens Color Luminous Intensity IV MIN. TYP. IF Forward Voltage V TYP. MAX. F Reverse Viewing Current IR Angle IF MAX. VR (2 θ 1/2) GaAsP AAPG1211F GaP GaAsP AYPG1211F GaP GaAlAs BRPG1211F GaP BRPY1211F GaAlAs GaP 2.1 3.7 2.1 3.7 3.7 6.2 3.0 5.2 3.0 5.2 5.2 8.8 20 20 20 20 20 20 mA 605 560 580 560 660 560 660 570 606 567 590 567 647 567 647 572 nm 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 mA 2.2 2.1 2.2 2.1 1.7 2.1 1.7 2.1 V 2.8 2.8 2.8 2.8 2.3 2.8 2.3 2.8 20 20 20 20 20 20 20 20 mA 100 100 100 100 100 100 100 100 µA 4 4 4 4 4 4 4 4 V Deg. 150° 12.4 17.6 20 12.4 17.6 20 Units mcd s Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Derating* Pd IF IFM VR Topr Tstg ∆IF Yellow (AY) Green (PG) Red (BR) Yellow-Green (PY) Orange (AA) Green (PG) Red (BR) Green (PG) (Ta=25°C) Units mW mA mA V °C °C mA/°C AYPG 70 25 60 4 BRPY 70 25 60 4 -40 to +85 -40 to +100 AAPG 70 25 60 4 BRPG 70 25 60 4 0.36 (DC) 0.86 (Pulse) * Ta=25°C, IFM applies for the pulse width ≤ 1msec. and duty cycle ≤1/20. s Taping Specifications φ 1.5 +0.1 0 (2.3) 1.75 + 0.1 s Operation Current Derating Chart (DC) 4+ 0.1 (0.2) 8.0 + 0.2 Center Hole (3.35) Quantity on tape: 3000 pieces per reel 2+0.5 φ 21+0.8 (φ 1.1) Center Hole 4+ 0.1 2+0.05 3.5 + 0.05 (1.2) Direction to pull +1 φ 60 -0 φ 13+0.2 AYPG, BRPY, AAPG, BRPG φ 13+0.2 9+0.3 11.4+1 +0 φ 180 3 s Precautions Please follow these handling precautions to prevent damage to the chip and ensure its reliability. 1. Soldering conditions: • Soldering iron: Temperature at tip of iron: 280°C max. (30W max.) Soldering time: 3 sec. max. • Dip soldering: Preheating: 120 ~ 150°C max. (resin surface temp.) 60 ~ 120 sec. max. Bath temperature: 260°C max. Dipping Time: 5 sec. max. • Reflow Soldering: °C Operation Heating 240 Temperature rise: 5°C/sec. Cooling: —5°C/sec. LED Surface Temperature s Spatial Distribution 1 -20° -30° -40° -50° 0° -10° -20° -30° -40° -50° -60° -50° -40° -30° -20° 1 0° -10° -20° -30° -40° -50° -60° 150 120 Pre-heating 2. Cleaning: PY AY -60° PG BR -60° -70° -80° -70° -80° -70° -80° -70° -80° • If cleaning is required, use the following solutions for less than 1 minute, at less than 40°C. • Appropriate chemicals: Ethyl alcohol and isopropyl alcohol. • Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of PCB and LED mounting method. The use of ultrasonic cleaning should be enforced at proper output after confirming there is no problem. Product specifications subject to change without notice. PG1211F-0301 ~ 0 60 to 120 sec. 5 sec. max X X Stanley Electric Sales of America, Inc. 2660 Barranca Parkway, Irvine, CA 92606 • Tel: 800-LED-LCD1 (533-5231) • Fax: 949-222-0555 Website: www.stanley-electric.com