CHP0230-PM-000T

CHP0230-PM TM Product Specifications July 2002 (1 of 4) Features ❏ InGaP HBT Technology ❏ 6mm Square, 50 Ohm Power Module Package ❏ Single Positive Supply ❏ 35% Linear Power Added Efficiency ❏ 50% Analog Power Added Efficiency ❏ +28.5 dBm Output Power (CDMA Mode) ❏ 30 dB Gain at Operating Output Power ❏ On-Board Power Down Mode Applications ❏ Cellular Multi-Mode Handsets ❏ Cellular Infrastructure ❏ Wireless Local Loop Subscriber Units ❏ CDMA Handsets ❏ CDMA2K 1X Handsets Description The CHP0230-PM is a 50 ohm matched, single supply, linear power amplifier module intended for use in cellular handsets and wireless local loop subscriber units. The highly integrated amplifier meets the requirements of CDMA and CDMA2K 1X systems. It is a member of Celeritek’s new TrueTriangle™ family of 3V power amplifier modules. The CHP0230-PM is packaged in a low-cost, space efficient, 6mm square, matched module that provides excellent 824 to 849 MHz 28.5 dBm, Cellular InGaP HBT Amplifier Module Functional Block Diagram Vcc 1 RF IN 2 Vref 3 BIAS Ground connection is on backside 6 Vcc 5 RF OUT 4 N/C electrical stability and low thermal resistance. The module operates from a fixed positive voltage and requires no external matching which significantly reduces space, cost and enhances ease of use. The 6x6 mm package is self contained, incorporating 50 ohm input and output matching networks optimized for output power, linearity and efficiency. Celeritek’s InGaP HBT technology offers a thermally robust and reliable PAM (power amplifier module) solution. Absolute Maximum Ratings Parameter Rating Parameter Rating Parameter Rating Collector Voltage (+Vcc) Collector Current (Icc) RF Input Power * RF Off. +6.0 V* 1.2 A 7 dBm Reference Voltage (Vref) Power Dissipation +3.1 V 5W Operating Temperature Storage Temperature Soldering Temperature -40°C to +100°C -65°C to +150°C 260°C for 5 Sec. Recommended Operating Conditions Parameter Typ Units Parameter Typ Units Collector Voltage (+Vcc) Reference Voltage (Vref) (Fixed and regulated) 3.2 to 4.1 +2.95 (±1.2%) Volts Volts Operating Temperature (PC Board) -20 to +70 °C Application Information The CHP0230-PM is a two-stage amplifier that requires a single regulated positive supply along with the unregulated battery voltage for proper operation. Vref is a regulated 2.95 reference voltage for the bias control circuitry. It can also be used as a power down mode select. Vcc is an unregulated supply voltage directly from the battery. Vcc should be applied prior to Vref and before RF input power. The CHP0230-PM can be operated over a range of supply voltages and bias points by adjustment of Vref. It is important that the maximum power dissipation of the package be observed at all times and that the maximum voltage across the device is not exceeded. 3236 Scott Boulevard Santa Clara, California 95054 Circuit Design Considerations Biasing The positive Vcc supply voltages are applied to pins 1 and 6. Most bypass decoupling is provided on-board. Vref is applied to pin 3. The recommended DC bypass capacitance is shown in the schematic diagram on Page 4. Inadequate bypass capacitance and inductance around the DC supply lines can compromise the adjacent channel power ratio (ACPR), reduce power gain and/or create oscillations. – Continued on Page 2 – Phone: (408) 986-5060 Fax: (408) 986-5095 CHP0230-PM Electrical Characteristics Product Specifications - July 2002 (2 of 4) TM Unless otherwise specified, the following specifications are guaranteed at room temperature with collector voltage (+Vcc) = 3.6 V. Parameter Condition Min Typ Max Units Frequency Range Gain Gain Ripple* Gain Variation Power Output Harmonics Noise Power in Receive Band Linearity (ACPR) @ Digital power output 824-849 MHz Over supply voltage Over temperature CDMA mode Analog 2nd @ Po = +31.5 dBm 3rd @ Po = +31.5 dBm 30 kHz bandwidth CDMA mode @ +28.5 dBm Pout, 885 kHz offset CDMA mode @ +28.5 dBm Pout, 1.9 MHz offset CDMA2K 1X mode** @ +27.8 dBm Pout, 885 kHz offset CDMA2K 1X mode** @ +27.8 dBm Pout, 1.9 MHz offset 824 29 30 2 0.03 +28.5 +31.0 -30 -30 -90 -52 -59 -49 -58 4.0 -10 105 515 750 60 2.0 2.95 849 33 1.5 Noise Figure Input Return Loss Icc (Vcc = 3.6 V) -47 -56 -47 -56 5.0 112 560 815 5.0 10 Quiescent Current (Iq) Vref Supply Current (Iref) Vref Supply Voltage (Vref) Leakage Current Pout = +12.0 dBm - CDMA mode Pout = +28.5 dBm - CDMA mode Pout = +31.5 dBm - Analog mode No RF Fixed and regulated (1.2% tolerance) Vref = 0 V, Vcc = 3.6 V MHz dB dB dB/V dB/°C dBm dBm dBc dBc dBm dBc/30KHz dBc/30KHz dBc/30KHz dBc/30KHz dB dB mA mA mA mA mA V µA * Specifications guaranteed over the temperature range of -20°C to +70°C. ** Modulation HPSK in 1.2288 MHz, RC3 PAR = 4.7 @ 1% CCDF. – Continued from Page 1 – Modulation When biased as specified, the CHP0230-PM will achieve the required adjacent channel response for the digital system specified. Celeritek tests 100% of each product under digital modulation to ensure correlation to customer applications. Thermal 1. The ground pad on the backside of the CHP0230-PM must be soldered to the ground plane. 2. All leads of the package must be soldered to the appropriate electrical connection. 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CHP0230-PM Product Specifications - July 2002 (3 of 4) TM Product Consistency Distribution Note: Unless otherwise specified, the following data was taken at 836 MHz. Current (Analog) @ 3.6 V, Pout = 31.5 dBm 10000 – MEAN USL -3sp 6000 – +3sp 5000 – 4000 – 3000 – 2000 – 2000 – 1000 – 0– 0.68 0– 0.7 0.72 0.74 0.76 0.78 Amps 0.8 0.82 0.48 7000 – 6000 – 8000 – Current (CDMA) @ 3.6 V, Pout = 28.5 dBm MEAN USL -3sp +3sp 4000 – 0.5 0.52 Amps 0.54 0.56 0.58 Gain (Analog) @ 3.6 V, Pout = 31.5 dBm 7000 – 6000 – 5000 – 4000 – 3000 – 2000 – 1000 – 0– 26 27 28 29 dB 30 31 32 33 LSL -3sp +3sp MEAN 3000 – USL 2500 – 2000 – 1500 – 1000 – 500 – Gain (CDMA) @ 3.6 V, Pout = 28.5 dBm MEAN USL +3sp LSL -3sp 0– 28.5 29 29.5 30 30.5 dB 31 31.5 32 32.5 Linearity (ACPR) @ 3.6 V, Pout = 28.5 dBm (±885 MHz) 8000 – MEAN USL 6000 – -3sp +3sp Linearity (ACPR) @ 3.6 V, Pout = 28.5 dBm (±1.98 MHz) 6000 – 5000 – -3sp 4000 – +3sp MEAN 4000 – 3000 – 2000 – 2000 – 1000 – 0– -56 -52 -52 dBc -50 -48 -46 0– -64 -63 -62 -61 -60 dBc -59 -58 -57 -56 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CHP0230-PM Recommended Application Circuit Note: This schematic represents the topology of the application circuit recommended by Celeritek. Product Specifications - July 2002 (4 of 4) TM PCB Footprint (Minimum Pad Dimensions) 0.295 (7.50) 0.100 (2.55) Vcc 10 µF 1 2 50Ω Vref 3.3 µF 3 T1 6 CHP0230-PM 5 220 pF 4 N/C 50Ω RF OUT 0.032 (0.80) MIN. X6 RF IN 0.240 (6.10) 0.015 (0.38) DIA. VIA HOLE X21 0.015 (0.40) RADIUS X12 T1 line is important to ensure best bypassing. Optimum performance is achieved through an electrical length of 20°min. at 835 MHz. Evaluation Board Schematic Board substrate: ER = 4.60 Thickness = 0.031 in. 0.054 (1.36) X4 0.060 (1.50) MIN. DIMENSIONS IN INCHES (mm) DRAWING NOT TO SCALE Physical Dimensions Ordering Information The CHP0230-PM is available in a surface mount 50 ohm matched module and devices are available in tube or tape and reel. Package Part Number for Ordering CHP0230-PM-0000 PM6 surface mount power package in tube CHP0230-PM-000T PM6 surface mount power package in tape and reel PB-CHP0230-PM Evaluation Board with SMA connectors for CHP0230-PM Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer. 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095