ES-12864E

ES-12864E

  • 厂商:

    ETC

  • 封装:

  • 描述:

    ES-12864E - 1/64 DUTY 1/9 BIAS STN, REFLECTIVE EL, LED - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
ES-12864E 数据手册
Excel Technology International Corporation ES-12864E 128 x 64 dots General Specification Item Display Format Module Dimensions Viewing Area Dot Size Dot Pitch Controller 1/64 Duty, 1/9 Bias STN, Reflective, EL, LED Value 128 x 64 78 x 70 x 12.4 62 x 44 0.42 x 0.58 0.44 x 0.60 T6963C (Toshiba) Unit dots mm mm mm mm Electrical Characteristics Item Supply Voltage for Logic Input Voltage LCM Recommended LCD Module Driving Voltage Power Supply Current for LCM Power Supply for EL Backlight Symbol VDD-VSS VIH VIL VDD-VLCD IDD (LED B/L OFF) ILED (LED B/L ON) IEE VEL Condition H Level L Level Ta=0ºC Ta=25ºC Ta=50ºC VDD=5.0V VDD-VLCD=8.7V FLM=64Hz VLED=4.2V Min. Standard Value Typ. Max. 5.0 VDD 0.2VDD 9.0 8.7 7.92 13 100 0.4 100V/-400Hz 5.5 9.3 9.0 8.2 15 150 1.0 - Unit V V 4.5 0.8VDD VSS 8.3 8.4 7.7 - V mA V AC Pin Assignment No. 1 2 3 4 5 6 7 8 9 10~17 18 19 20 Symbol FGND/VEE VSS VDD VLCD WR RD CE C/D RES DB0~DB7 FS BKLA BKLK Function Frame Ground for DC to DC built in type, this pin becomes suppply voltage output for LCD Panel GND Logic Supply Voltage LCD driver supply voltage Write Data Read Data Chip enable Command/Data Register select Reset Data Bus Font Select, H=6x8 dot matrix, L=8x8 dot matrix Power Supply for Backlight. (4.2V/100~150mA DC for LED Backlight, 110V/400Hz AC for EL Excel Technology International Corporation ES-12864E 128 x 64 dots External Dimensions 1/64 Duty, 1/9 Bias STN, Reflective, EL, LED Block Diagram Power Supply
ES-12864E
物料型号: - 型号:ES-12864E

器件简介: - 该器件是一个128x64点阵的1/64占空比、1/9偏置的STN型液晶显示器,具有反射特性,支持EL(电致发光)和LED背光。

引脚分配: - 1. FGND/NEE:内置DC-DC转换器的框架地,此引脚成为LCD面板的供电输出。 - 2. VSS:地线。 - 3. VDD:逻辑供电电压。 - 4. VLCD:LCD驱动供电电压。 - 5. WR:写数据。 - 6. RD:读数据。 - 7. CE:芯片使能。 - 8. C/D:命令/数据寄存器选择。 - 9. RES:复位。 - 10~17. DB0~DB7:数据线。 - 18. FS:字体选择,高电平为6x8点阵,低电平为8x8点阵。 - 19. BKLA:背光电源(LED背光为4.2V/100~150mA DC,EL背光为110V/400Hz AC)。 - 20. BKLK:EL背光控制。

参数特性: - 显示格式:128x64点阵。 - 模块尺寸:78x70x12.4毫米。 - 视图区域:62x44毫米。 - 点大小:0.42x0.58毫米。 - 点间距:0.44x0.60毫米。 - 控制器:T6963C(东芝)。

功能详解应用信息: - 该模块推荐用于LCD模块驱动电压为VDD-VLCD,不同温度下的推荐电压值不同,0°C时为8.3~9.3V,25°C时为8.4~9.0V,50°C时为7.7~8.2V。 - 电源电流:LED背光关闭时为13~15mA,LED背光开启时为100~150mA。 - EL背光的电源电压为100V交流电,频率为400Hz。

封装信息: - 外部尺寸图已提供,但具体数值未在文本中给出。