FDD12-0515T4

FDD12 SERIES DC-DC CONVERTER 12W TRIPLE OUTPUT FDD12 – 0512 T 4 WATTAGE 0512 : +5V&±12V OUT 0515 : +5V&±15V OUT 4: 10~36V IN 5: 18~72V IN T : TRIPLE OUTPUT MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (MIN.) CASE Single Output Models FDD12 – 0512T4 FDD12 – 0515T4 FDD12 – 0512T5 FDD12 – 0515T5 10~36 VDC 10~36 VDC 18~72 VDC 18~72 VDC 12 WATTS 12 WATTS 12 WATTS 12 WATTS +5/±12VDC +5/±15VDC +5/±12VDC +5/±15VDC 1.5A/±0.2A 1.5A/±0.16A 1.5A/±0.2A 1.5A/±0.16A 80% 80% 80% 80% FD FD FD FD FEATURES * LOW COST * 4:1 WIDE INPUT RANGE * I/O ISOLATION * LC INPUT FILTER * SHORT CIRCUIT PROTECTION * HIGH PERFORMANCE * 2 YEARS WARRANTY DESCRIPTION THE FDD12 SERIES ARE 12 WATTS TRIPLE OUTPUT DC/DC CONVERTERS. 4:1 WIDE INPUT RANGE WITH I/O ISOLATION AND SHORT CIRCUIT PROTECTION FEATURES MAKE IT SUITABLE USED ON VARIABLE APPLICATIONS AT LOW COST. ALL FDD12 MODELS CONTAIN LC INPUT FILTER TO MINIMIZE REFLECTED RIPPLE & NOISE. ALL MODELS ARE PACKAGED IN L x W x H = 2" x 2" x 0.47" BLACK COATED METAL CASE PIN CONFIGURATION, AND PCB MOUNTABLE DIRECTLY. CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com sales@chinfa.com FDD12 SERIES SPECIFICATION GENERAL SPECIFICATION * Switching frequency: ......................... * Isolation voltage: .............................. * Isolation resistance: .......................... * Operating ambient temperature: ......... * Storage temperature: ........................ * Max. Case temperature: ..................... * M.T.B.F.: .......................................... * Cooling: ........................................... * Transient recovery time: .................... * Temperature coefficient: .................... * Dimension: ...................................... DC-DC CONVERTER 12W TRIPLE OUTPUT All Specifications Typical At Nominal Line, Full Load, 25℃ Unless Otherwise Noticed >180KHz 1,500VDC >1G Ω(min.) -25 to +71℃ -40 to +100℃ 85℃ 661,100Hrs at @ GF40, according to MIL-HDBK-217F Free air convection 500µS, 25% load step change ±0.02% / ℃ 50.8 x 50.8 x 12mm INPUT SPECIFICATIONS * Input voltage range / frequency: ........ 10 ~ 36VDC for 24V 18 ~ 72VDC for 48V * Input filter: ....................................... LC type OUTPUT SPECIFICATIONS * Output voltage accuracy: ................... ±2% for +5V ±6% for ±12V & ±15V * Minimum load: .................................. ±10% for +5V ±20% for ±12V & ±15V * Load regulation: ............................... ±2% for +5V ±6% for ±12V & ±15V * Ripple & noise: ................................. 20MHZ BW, Vout x ±1% mV p-p (max.) * Efficiency: ........................................ Up to 80%, see model list * Derating: ......................................... See table 1 * Case material: ................................. Metal CONTROL AND PROTECTION * Remote on/off: ................................. ON : Open or 8 ~ 10VDC OFF : -0.3 ~ 2VDC CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com sales@chinfa.com FDD12 SERIES MECHANISM & PIN CONFIGURATION mm [inch] DC-DC CONVERTER 12W TRIPLE OUTPUT PHYSICAL CHARACTERISTICS CASE SIZE CASE MATERIAL WEIGHT 50.8 x 50.8 x 12mm 2 x 2 x 0.47inches Metal 70 g BOTTOM VIEW PIN ASSIGMENT PIN NO. TRIPLE 1 Vi+ 2 Vi4 ON/OFF 5 Vo2 (+OUT) 6 Vo1 (+5V) 7 com 8 Vo3 (-OUT) Derating: [TABLE 1] Power out [%] 100 NATURAL CONVECTION COOLING 0 -25 60 70 85 Ambient Temperture [℃] CHINFA ELECTRONICS IND., CO. LTD. ISO 9001 Certified www.chinfa.com sales@chinfa.com