MKS02

Metallized polyester capacitors in PCM 2.5 mm Ideally suited for decoupling up to high-frequency ranges. volume/capacitance ratio. Very advantageous PCM 2.5 Available taped Wide capacitance range with smallest box sizes. mm technology with low self-inductance for low damping applications. and reeled. Technical Data Dielectric: Polyethylene terephthalate film. Capacitor electrodes: Vacuum-deposited aluminium. Encapsulation: Flame retardent plastic case, UL 94 V-0, with epoxy resin seal. Colour: Red. Marking: White. Temperature range: -55° C to +100° C. Test specifications: In accordance with IEC 60384-2 and EN 130400 (u. prep.). Test category: 55/100/21 in accordance with IEC. Insulation resistance at +20° C: Maximum pulse rise time: Capacitance pF/µF 1000...2200 3300...6800 0.01...0.022 0.033...0.068 0.1...0.33 0.47 ...1.0 1.5 Pulse rise time V/µsec max. operation 175 100 50 30 20 15 12 test 1750 1000 500 300 200 150 120 Ur 16 VDC Utest 10 V C = 3.75 x 103 MOhms Mean value:1x104 MOhms >= 3.75 x 103 MOhms Mean value:1x104 MOhms >= 1 x 104 MOhms Mean value:2x104 MOhms >= 1.5 x 104 MOhms Mean value:3x104 MOhms 0.33µF= 1250 sec (MOhms x µF) Mean value: 3000 sec for pulses equal to the rated voltage. Vibration: 6 hours at 10...2000 Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC 60068-2-6. Low air density: 1 kPa = 10 mbar in accordance with IEC 60068-2-13. Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29. Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85° C for DC voltages and from +75° C for AC voltages. 50 VDC 10 V 63 VDC 50 V Impedance change with frequency (general guide) 100VDC 100V In accordance with IEC 60384-2 and EN 130400 (u. prep.). Measuring time: 1 min. Capacitance tolerances: +/-20%, +/-10%, (+/-5% available subject to special enquiry). Test voltage: 1.6 Vr, 2 sec. Dissipation factors at +20° C: tan delta at f 1 kHz 10 kHz 100 kHz C