OM1327NMM

OM1327SMM OM1327NMM OM1327NKM OM1327NTM OM1327STM OM1327N2M 1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703408 Three Terminal, Precision Adjustable Negative Voltage Regulator In Hermetic Style Packages (LM137AHV) Please see mechanical outlines herein FEATURES • • • • • • Similar To Industry Standard LM137AHV Approved To DESC Standardized Military Drawing Number 7703408 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles Maximum Output Voltage Tolerance Is Guaranteed to + 1% DESCRIPTION These three terminal negative regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from -1.2 volts to -47 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25°C Power Dissipation Case 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-1.2 to -47 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4.25 to -51.25 VDC 4 11 R2 Supersedes 1 07 R1 3.5 3.5 - 29 OM1327NTM, OM1327STM, OM1327NKM, OM1327SMM, OM1327NMM, OM1327N2M ELECTRICAL CHARACTERISTICS Parameter Reference Voltage Symbol VREF -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1327NTM, OM1327STM, OM1327NKM, OM1327SMM, OM1327NMM Test Conditions VDIFF  = 3.0V, TA = 25°C VDIFF  = 3.0V VDIFF  = 50V, TA = 25°C VDIFF  = 50V Line Regulation (Note 1) Load Regulation (Note 1) RLOAD VDIFF  50V, 8mA ≤ IL ≤ 110mA, TA = 25°C VDIFF  = 5V, 8mA ≤ IL ≤ 1.5A, TA = 25°C RLINE 3.0 V ≤ VDIFF  ≤ 50V, TA = 25°C Min. -1.262 Max. -1.238 -1.22 -1.22 -1.22 6 20 25 25 50 5 mV mV mV V Unit • • • -1.28 -1.28 -1.28 -6 -20 -25 -25 • Thermal Regulation VRTH Vin = -14.6V, IL = 1.5A Pd = 20 Watts, t = 10 ms, TA = 25°C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 µF VDIFF  = 3.0V VDIFF  = 40V VDIFF  = 50V Adjustment Pin Current Change Miminum Load Current ILmin ∆IAdj VDIFF  = 5V, 8mA ≤ Iout ≤ 1.5A 3V ≤ VDIFF  ≤ 50V, IL ≤ 8mA VDIFF  = 3.0V, Vout = -1.4V (forced) VDIFF  = 10V, Vout = -1.4V (forced) VDIFF  = 40V, Vout = -1.4V (forced) VDIFF  = 50V, Vout = -1.4V (forced) Current Limit (Note 2) ICL VDIFF  = 5V VDIFF  = 50V, TA = 25°C -50 -5 • • • • • • • • • • • 66 dB 100 100 100 -5 -6 5 6 3.0 3.0 5.0 5.0 1.5 0.2 3.5 1.0 A mA µA µA Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range. PART NUMBER DESIGNATOR Standard Military Drawing Number 7703408M 7703408U 7703408T 7703408Y 7703408N 77034082 Omnirel Part Number OM1327SMM OM1327STM OM1327NTM OM1327NKM OM1327NMM OM1327N2M Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 3.5 3.5 - 30 OM1327NTM, OM1327STM, OM1327NKM, OM1327SMM, OM1327NMM, OM1327N2M ELECTRICAL CHARACTERISTICS OM1327N2M Parameter Reference Voltage Symbol VREF -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) Min. -1.262 Max. -1.235 -1.22 -1.22 -1.22 -1.22 -1.22 10 25 25 31 50 2 mV mV mV V Unit Test Conditions VDIFF  = 3.0V, TA = 25°C VDIFF  = 3.0V VDIFF  = 40V, TA = 25°C VDIFF  = 40V VDIFF  = 50V, TA = 25°C VDIFF  = 50V • • • • -1.28 -1.28 -1.28 -1.28 -1.28 -10 -25 -25 -31 Line Regulation (Note 1) Load Regulation (Note 1) RLINE 3.0 V ≤ VDIFF  ≤ 50V, TA = 25°C VDIFF  50V, 8mA ≤ IL ≤ 100 mA, TA = 25°C VDIFF  = 5V, 8mA ≤ IL ≤ 500 mA, TA = 25°C RLOAD • Thermal Regulation VRTH Vin = -16.25V, IL = 330 mA Pd = 5 Watts, t = 10 ms, TA = 25°C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 µF VDIFF  = 3.0V VDIFF  = 40V VDIFF  = 50V Adjustment Pin Current Change Miminum Load Current ILmin ∆IAdj VDIFF  = 5V, 8mA ≤ Iout ≤ 200 mA 3V ≤ VDIFF  ≤ 50V, IL ≤ 8mA VDIFF  = 3.0V, Vout = -1.4V (forced) VDIFF  = 10V, Vout = -1.4V (forced) VDIFF  = 40V, Vout = -1.4V (forced) VDIFF  = 50V, Vout = -1.4V (forced) Current Limit (Note 2) ICL VDIFF  = 5V VDIFF  = 50V, TA = 25°C -50 -2 • • • • • • • • • • • 66 dB 100 100 100 -5 -6 5 6 3.0 3.0 5.0 5.0 0.5 0.1 1.8 0.65 A mA µA µA Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. TYPICAL APPLICATION IPROG + CIN* 1.0µF R2 R1 120Ω CO** + 1.0µF * Cin is required if regulator is located more than 4 inches from power supply filter. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. ** Co is necessary for stability. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. 3.5 IAdj VIN -VIN OM1327STM VOUT -VOUT Vout = -1.25 V (1 +R2) R1 3.5 - 31 OM1327NTM, OM1327STM, OM1327NKM, OM1327SMM, OM1327NMM, OM1327N2M MECHANICAL OUTLINE .425 .420 .410 .200 .190 .045 .035 .665 .645 .537 .527 1 .100 .200 3 2 .035 WIDE FLAT 3 PLCS. .425 .150 .140 .350 MIN. 123 .430 .410 .020 ± .020 .115 .160 .080 .038 MAX. .750 .500 OM1327SMM .005 .035 .025 .100 TYP. .120 TYP. Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Case - Isolated .140 .140 .015 .075 .157 .140 .075 OM1327STM Isolated Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Isolated OM1327NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Input 1 2 .030 MIN. .415 3 .062 .375 OM1327NMM Pin 1 - Adjust Pin 2 - Output Pin 3 - Input 1.53 REF. 0.875 MAX. 0.135 MAX. 0.450 0.250 0.312 MIN. SEATING PLANE 0.043 0.038 2 PLCS. 0.225 0.205 0.161 0.151 0.525 R. MAX. 1.197 1.177 0.675 0.655 0.440 0.420 .065 .020 X45° REF. (±.003) .009 R. 20 PLCS. .040 4 .010 0.188 R. MAX. .075 (±.010) TYP. 9 .025 TYP. 3 1 19 2 1 .003 .085 .025 SQ. TYP. 18 14 .160 SQ. REF. 13 .050 (±.005) TYP. .050 TYP. .040 X45° REF (3 PL) OM1327N2M Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 VIN NC NC NC NC NC NC NC ADJUST NC Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 NC VOUT VOUT NC NC NC NC NC NC VIN OM1327NKM 3.5 Pin 1 - Adjust Pin 2 - Output Case - Input For additional information please see the mechanical outline section.