PCL01-6

05071 PLC01-6 Only One Name Means ProT ek’Tion™ LOW CAPACIT ANCE TVS ARRA Y APPLICA TIONS ✔ T1/E1 Line Cards ✔ ISDN Telecom Equipment ✔ xDSL, USB, SCSI & Ethernet Interfaces ✔ Cellular Base Stations ✔ Data & Bus Lines for FCC Part 68 Applications IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 48A, 8/20µs, L3(Line-Gnd), L4(Line-Line) & L1(Power) FEA TURES SO-16 (Wide Body) ✔ ESD PROTECTION > 40 kilovolts ✔ 1,500 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ Low Clamping Voltage ✔ 100A (10/1000µs) per Bellcore 1089(Intra-Building) ✔ 200A (10/160µs) per FCC Part 68 ✔ Bidirectional Configuration ✔ Protects 1 Line MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 (Wide Body) Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURA TION 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 05071.R4 8/03 1 www.protekdevices.com PLC01-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (td = 10/1000µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 1,500 -55°C to 150°C -55°C to 150°C UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Note 2) @ IP = 100A VC VOLTS 15.0 MAXIMUM CLAMPING VOLTAGE (See Note 3) @ IP = 200A VC 16.0 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM VOLTS PLC01-6 6.0 @ 1mA V(BR) VOLTS 8.0 @VWM ID µA 25 @0V, 1 MHz C pF 50 Note 1: Electrical characteristics apply from pins 13-16 to 1-4 and 5-8 to 9-12; see circuit diagram. Note 2: VC tested at 10/1000µs impulse waveform. Note 3: 10/160µs impulse waveform per FCC Part 68. 05071.R4 8/03 2 www.protekdevices.com PLC01-6 GRAPHS 100 PPP - Peak Pulse Power - kW FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10 1,500W 10/1000µs Waveform 1 0.1 0.1 1 10 100 1,000 td - Pulse Duration - µs 10,000 100,000 FIGURE 2 PULSE WAVE FORM 100 IPP - Peak Pulse Current - % of IPP FIGURE 3 POWER DERATING CURVE Peak Pulse Power 10/160µs tf 100 Peak Value IPP % Of Rated Power TEST WAVEFORM PARAMETERS tf = 10µs td = 160µs td = t I /2 PP 80 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 50 e-t 0 0 150 t - Time - µs 300 05071.R4 8/03 3 www.protekdevices.com PLC01-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-16 (Wide Body) 16 9 -B- P 1 8 0.010” (0.25 MM) M BM 8 PL PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 10.15 7.40 2.35 0.35 0.50 1.27 BSC 0.25 0.10 10.05 0.25 INCHES MIN MAX G C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M TBS M R X 45º D AS F J A B C D F G J K P R NOTES 0.411 10.45 0.400 7.60 0.292 0.299 0.104 2.65 0.093 0.49 0.014 0.019 0.90 0.020 0.035 1.27 BSC 0.05 BSC 0.05 BSC 0.32 0.010 0.012 0.009 0.25 0.004 10.55 0.395 0.415 0.75 0.010 0.029 MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.325” ± 0.005” 0.420” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T13 = 13 Inch Reel - 1,000 pieces per 16mm tape, i.e., PLC01-6-T13. 3. No Suffix = Product Shipped in Tubes of 46 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06008 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05071.R4 8/03 4 www.protekdevices.com