PL15M0011SCA-0-0-01

PD LD PL13/15 DFB Series Laser Diode Modules Inc P D-LD Inc. offers a variety of packaging options for its DFB Series of laser diodes. These units are available i n r e a d y -t o - u s e, f i b e r - c o u p l e d packages, including FC, ST, and SC receptacles, as well as fiber- pigtailed units. The InGaAsP laser diodes offered by PD-LD are of proven design and manufacture; t h e standard wavelengths are centered at 1310 and 1 5 5 0 n m . F i b e r -c o u p l e d CW (continuous-wavelength) output powers range from 0.1 - 2 mW, depending on the fiber type and desired performance level. Tracking error over OTR -40 to +85C is 1.0 dB maximum . Optional board or panel mount flanges are available for pigtailed devices; contact PD-LD Sales. Also, PD-LD Inc. will package non-standard lasers or parts specified by a customer using standard or custom receptacle or pigtailing techniques. Both receptacle and pigtail packages are made using an active micro-positioning system and laser welding process ensuring a reliable and well constructed product. PD-LD offers two popular pin-outs for DFB lasers to address various existing PCB layouts. Features • Internal Monitor Photodetector • Compact, reliable receptacle & coax fiber-coupled package • 0.1 - 2.0 mW singlemode (9/125) • 30dB minimum side mode suppression • 0.2nsec typical rise/fall time Performance Specifications P D-LD Part No.1 Wavelength (nm) Min. Typ. Max. Min. Fiber Coupled Power (mW) Pin-out Threshold Operating Current (mA) Current (mA) Typ. Max. Typ. Max. Monitor PD Current (mA) Min. Typ. Continuous Wavelength InGaAsP Lasers @ 25C 1 mW into 9/125 SMF 0.5mW FC Receptacle 2 mW into 9/125 SMF 1 mW into 9/125 SMF 0.5 mW into 9/125 SMF 1 mW into 9/125 SMF 2 mW into 9/125 SMF “H” “H” “T” “H” “H” “T” “T” InGaAs 0.1 0.8 InGaAs 0.1 0.8 InGaAs 0.1 0.8 InGaAs 0.1 0.8 InGaAs 0.1 0.8 InGaAs 0.1 0.8 InGaAs 0.1 0.8 PL13U001100B -R-0-01 PL13U0.5FC11-S -0 PL13N0021FAA-0-0-01 PL15M0011SCA -0-0-01 PL15M0.51SCC-R-0-01 PL15N001FCG-R-0-01 PL15N002FC0-0-0-01 1290 1310 1 330 1290 1310 1 330 1295 1310 1 325 1530 1550 1570 1530 1530 1530 1550 1570 1550 1570 1550 1570 6 6 10 10 15 10 10 20 20 15 30 30 15 15 18 18 20 30 30 20 20 40 40 35 60 45 30 30 1Examples only; most device/packaging combinations available. See 1Examples only; most device/packaging combinations available. part numbers on reverse; cmay be Sales Dept. notice. Changes to specifications ontact made without 96-02FOLD1.Rev. A 98-02FOLDa.Rev C 03-02PL13/15DFB. Rev.2 30-B Pennington-Hopewell Rd., Pennington NJ 08543 Laser Diodes for Fiber Optics Physical Dimensions (mm) & Pin Connection PLD L13/15DFB - Series “H” (4) C ase (3) PD LD Coaxial-Pigtailed Laser Diode Package (2) (1) 13A,13U,15A,15M Lasers Consult PD -LD for Available Board Mount (10181 or 10198) or Panel Mount Brackets (10219) or refer to LDs w/ PM Fiber Pigtail (2) (3) Case “T” PD LD (4) 13N, 15N Laser (1) ST Receptacle LD Package Ordering Information Lasers - Pigtailed & Receptacle PLWWWPPPFCCB-0-V-LL L = Laser WWW=Wavelength and Pin-out 1310nm 1550nm PPP = Fiber-Coupled Power 0.1 = 0.10 mW (100 µW) 0.8 = 0.8 mW (800 µW ) 0.2 = 0.20 mW (200 µW) 001 = 1.0 mW 0.5 = 0.5 mW (500 µW ) 002 = 2.0 mW O=Orientation V=Version 0=None 0=Standard Specifications A=Bracket Shipped Loose (pigtailed units only) Specify orientation as required F= 1= 2= 3= 4= 9= Fiber Type 9/125 SMF 50/125 MMF 62.5/125 MMF 100/140 MMF Customer Supplied B = Bracket Type A = None B = Panel Mount C = Board Mount LL = Length in meters ( 01,02,0.5 etc.) (pigtailed devices only) CC = Connector Type (pigtailed devices only) ST = ST/PC S C = S CPC S A=SC/APC FC = FC/PC FA = FC/APC ST is a registered trademark of AT&T FU = F C/UPC OO = No 03-02 PL13/15DFB.Rev.2 30-B Pennington-Hopewell Rd., Pennington NJ 08543 FON: 609-564-7900 FAX: 609-564-7901 EMAIL: info@pd-ld.com