PS-AD155

MEAN WELL SWITCHING POWER SUPPLY ISO-9001 CERTIFIED MANUFACTURER . LOW COST, HIGH RELIABILITY . 105ºC OUTPUT CAPACITOR . INTERNATIONAL AC INPUT RANGE . COMPACT SIZE, LIGHT WEIGHT . 100% FULL LOAD BURN-IN TEST . BUILT IN EMI FILTER, LOW RIPPLE NOISE AD-155 SERIES . HIGH EFFICIENCY, LOW WORKING TEMPERATURE . SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT . SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED MODEL SPECIFICATION DC OUTPUT VOLTAGE OUTPUT V. TOLERANCE OUTPUT RATED CURRENT OUTPUT CURRENT RANGE RIPPLE & NOISE LINE REGULATION LOAD REGULATION DC OUTPUT POWER EFFICIENCY DC VOLTAGE ADJ. INPUT VOLTAGE RANGE AC CURRENT INRUSH CURRENT LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE PROTECTION BATTERY LOW PROTECTION TEMP. COEFFICIENT SETUP, RISE, HOLD UP TIME POWER FACTOR VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE WORKING TEMP., HUMIDITY STORAGE TEMP., HUMIDITY DIMENSION WEIGHT SAFETY STANDARDS EMC STANDARDS NOTE : CH1 13.8V ±2% 10.5A 0-11.5A 150mVp-p ±0.5% ±0.5% AD-155A CH2 13.3V ---------0.5A 0-0.5A ---------------------------CH1 27.6V ±1% 5A 0-5.5A 150mVp-p ±0.5% ±0.5% AD-155B CH2 27.1V ---------0.5A 0-0.5A ---------------------------CH1 54V ±1% 2.7A 0-2.7A 240mVp-p ±0.5% ±0.5% AD-155C CH2 53.5V ---------0.2A 0-0.5A ---------------------------156.5W 84% CH1:48-58V 151.55W 80% CH1:12-14.5V 88~ 264VAC 47~ 63Hz; 124~ 370VDC 2.5A/115V 1.5A/230V COLD START 20A/115V 40A/230V 0.92 10~ 500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms -10ºC~ +60ºC(REFER TO OUTPUT DERATING CURVE), 20%~ 90% RH -20ºC~ +85ºC, 10%~ 95% RH 199*110*50mm CASE:906 1Kg UL1950, TUV EN60950 APPROVED CISPR22(EN55022)CLASS B,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-3-2,-3 19.5V( +1.5V, -1V ) 39V±2V 1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. 2.TOLERANCE：INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION. 3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 5.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD. 6.EACH OUTPUT PROVIDE UP TO MAXIMUM CURRENT, BUT TOTAL LOAD CAN NOT EXCEED MAX. OUTPUT POWER. 2001-08-20