PS9114

NEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER FEATURES • HIGH COMMON MODE TRANSIENT IMMUNITY CMH, CML = ±20 kV/µs TYP • SMALL PACKAGE 5-pin SOP • HIGH SPEED 10 Mbps • PULSE WIDTH DISTORTION |tPHL – tPLH| = 3 ns TYP • HIGH ISOLATION VOLTAGE BV = 2500 Vr.m.s. • OPEN COLLECTOR OUTPUT • AVAILABLE IN TAPE AND REEL PS9114-F3, F4: 2500 pcs/reel PS9114 DESCRIPTION NEC's PS9114 is an optically coupled high-speed, isolator containing a GaAIAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. APPLICATIONS • FACTORY AUTOMATION NETWORK • MEASUREMENT EQUIPMENT • MOTOR DRIVE / INVERTER ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified) PART NUMBER SYMBOL PARAMETERS Forward Voltage, IF = 10 mA, TA = 25°C Reverse Current, VR = 3 V, TA = 25°C Capacitance, V = 0, f = 1 MHz, TA = 25°C High Level Output Current Vcc = VO = 5.5 V, VF = 0.8 V Low Level Output Voltage2 Vcc = 5.5 V, IF = 5 mA, IOL = 13 mA High Level Supply Current, VCC = 5.5 V, IF = 0 mA Low Level Supply Current, VCC = 5.5 V, IF = 10 mA Threshhold Input Current, High → Low, VCC = 5 V, VO = 0.8V, RL = 350 Ω Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25°C Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°C Propagation Delay Time , High → Low VCC = 5 V, RL = 350 Ω, IF = 7.5 mA Propagation Delay Time3, Low → High VCC = 5 V, RL = 350 Ω, IF = 7.5 mA Rise Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA Fall Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 3 PS9114 UNITS V µA pF µA V mA mA mA Ω pF ns ns mA mA 1011 0.6 54 51 20 10 75 100 75 100 30 0.02 0.15 3 7.0 2 250 0.6 8 11 5 MIN 1.4 TYP1 1.65 MAX 1.9 10 Diode VF IR Ct IOH Detector VOL ICCH ICCL IFHL RI-O CI-O Coupled tPHL tPLH tr tf TA = 25°C TA = 25°C Continued on next page California Eastern Laboratories PS9114 ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified), Continued PART NUMBER SYMBOL | tPHL – tPLH | tPSK CMH CML PARAMETERS Pulse Width Distortion, (PWD)3, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA Propagation Delay Skew, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA Common Mode Transient Immunity at High Level Output4, VCC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V, VCM = 1 kV Common Mode Transient Immunity at Low Level Output4, VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX) = 0.8 V, VCM = 1 kV UNITS ns ns kV/µs kV/µs 10 10 20 20 MIN PS9114 TYP 3 MAX 50 60 Notes: 1. Typical values at TA = 25°C. 2. Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device.. 3. Test Circuit for Propagation delay time Pulse input (IF) (PW = 1 µ s, Duty cycle = 1/10) Input (Monitor) 0.1 µ F VCC = 5 V RL = 350 Ω VO (Monitor) CL = 15 pF Output 47 Ω tPHL 4.Test Circuit for common mode transient immunity tPLH 1.5 V VOL Input (IF = 7.5 mA) 50% Coupled VCM 90% SW IF 0.1 µ F VCC = 5 V RL = 350 Ω VO (Monitor) CL = 15 pF 10% tr VO (IF = 0 mA) VCM Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This device is ESD sensitive. 2. Bypass capacitor of more than 0.1 µF must be used between VCC and GND within 10 mm of the device. 1 kV 0V tf VOH 2V 0.8 V VOL VO (IF = 7.5 mA) ABSOLUTE MAXIMUM SYMBOLS Diode IF VR Detector VCC VO IO PC Coupled BV TA TSTG RATINGS1 (TA = 25°C) UNITS mA V V V mA mW Vr.m.s. °C °C RATINGS 30 5 7 7 25 40 2500 -40 to +85 -55 to +125 RECOMMENDED OPERATING CONDITIONS PART NUMBER SYMBOLS VFL IFH VCC N RL PARAMETERS Low Level Input Voltage High Level Input Current Supply Voltage TTL(RL = 1kΩ loads) Operating Temperature PS9114 UNITS MIN TYP MAX mA 0 0.8 mA 6.3 10 12.5 V 4.5 5.0 5.5 5 Ω 300 4k PARAMETERS Forward Current Reverse Voltage Supply Voltage Output Voltage Output Current Power Dissipation2 Isolation Operating Temperature Storage Temperature Voltage3 ORDERING INFORMATION PART NUMBER PS9114 PACKAGE 5-pin SOP PACKAGE STYLE Magazine case 100 PCS Embossed Tape 2500 pcs/reel APPLIICATION PART NUMBER* PS9114 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Applies to output pin Vo. Reduced to 1.5 mW/°C at TA = 65°C or more. 3. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. PS9114-F3 PS9114-F4 * For the application of the Safety Standard, following part number should be used. PS9114 TYPICAL PERFORMANCE CURVES (TA = 25°C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 40 50 DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Detector Power Dissipation, PC (mW) 85 Maximum Forward Current, IF (mA) 40 30 30 20 20 10 10 0 20 40 60 80 100 0 20 40 60 80 85 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) FORWARD CURRENT vs. FORWARD VOLTAGE 100 12 SUPPLY CURRENT vs. AMBIENT TEMPERATURE High Level Supply Current, ICCH (µA), Low Level Supply Current, ICCL (µA) Forward Current, IF (mA) 10 10 TA = +85ºC +50ºC +25ºC 0ºC -25ºC 8 ICCL (IF = 10 mA) 6 1 4 ICCH (IF = 0 mA) 2 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0 -50 -25 0 25 50 75 100 Forward Voltage, VF (V) Ambient Temperature, TA (ºC) OUTPUT VOLTAGE vs. INPUT CURRENT 6 LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 0.6 Low Level Output Voltage, VOL (V) VCC = 5.0 V, TA = 25ºC 5 IF = 5.0 mA, VCC = 5.5 V 0.5 Output Voltage, VO (V) 4 RL = 350 Ω 1.0 kΩ 0.4 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0.2 3 4.0 kΩ, 4.7 kΩ 0.3 2 1 0.1 0 1 2 3 4 5 6 0 -50 -25 0 25 50 75 100 Input Current, IF (mA) Ambient Temperature, TA (ºC) PS9114 TYPICAL PERFORMANCE CURVES (TA = 25°C) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Propagation Delay Time, tPHL, tPLH (ns) 2.5 100 IF = 7.5 mA, VCC = 5.0 V 80 tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω 60 Threshold Input Current, IFHL (mA) VCC = 5.0 V, VO = 0.6 V 2.0 1.5 RL = 350 Ω 1.0 1.0 kΩ 4.7 kΩ, 4.0 kΩ 0.5 40 tPHL: RL = 350 Ω, 1.0 kΩ 20 0 -50 -25 0 25 50 75 100 0 -50 -25 0 25 50 75 100 Ambient Temperature, TA (ºC) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT IF = 7.5 mA, VCC = 5.0 V 100 tPLH: RL = 4.0 kΩ tPLH: RL = 4.7 kΩ Ambient Temperature, TA (ºC) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Pulse Width Distortion | tPHL – tPLH | (ns) Propagation Delay Time, tPHL, tPLH (ns) 120 60 IF = 7.5 mA, VCC = 5.0 V 50 RL = 4.7 kΩ 40 4.0 kΩ 80 60 tPHL: RL = 4.7 kΩ tPHL: RL = 4.0 kΩ 30 40 20 RL = 350 Ω 1.0 kΩ 20 10 0 -50 -25 0 25 50 75 100 0 -50 -25 0 25 50 75 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) SWITCHING TIME vs. AMBIENT TEMPERATURE IF = 7.5 mA, VCC = 5.0 V PROPAGATION DELAY TIME vs. INPUT CURRENT tr: RL = 4.0 kΩ, 4.7 kΩ Propagation Delay Time, tPHL, tPLH (ns) 400 120 Switching Time, tr, tf (ns) 100 tPLH: RL = 4.0 kΩ 300 80 200 tr: RL = 1.0 kΩ tr: RL = 350 Ω 60 100 tf: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ 40 tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω 20 tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ VCC = 5.0 V, TA = 25ºC 11 13 15 0 -50 -25 0 25 50 75 100 0 5 7 9 Ambient Temperature, TA (ºC) Input Current, IF (mA) PS9114 OUTLINE DIMENSIONS (Units in mm) PS9114 3.4 +0.3 -0.1 MARKING TOP VIEW 5 4 3 1. Anode 2. Cathode 3. GND 4. VO 5. VCC 1 2 7.0±0.3 4.4 2.6±0.2 0.15 +0.10 -0.05 9114 N234 No. 1 pin Mark Initial of NEC (Engraved mark) N Assembly Lot N 2 34 Week Assembled Year Assembled (Last 1 Digit) Rank Code 0.1±0.1 1.27 0.4 +0.10 -0.05 0.25 M 0.5±0.3 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 09/10/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd.