SFH4110

GaAs-IR-Lumineszenzdiode (Mini Sidelooker) GaAs Infrared Emitter (Mini Sidelooker) SFH 4110 Wesentliche Merkmale • • • • • • Wellenlänge der Strahlung 950 nm Enger Abstrahlwinkel Hohe Strahlstärke Geringe Außenabmessungen Gehäusegleich mit Fototransistor SFH 3100 F Hoher Koppelfaktor in Lichtschranken in Verbindung mit SFH 3100 F • Hohe Zuverlässigkeit Anwendungen • • • • • • • Sender für Lichtschranken Bandende Erkennung (z.B. Videorecorder) Datenübertragung Positionsüberwachung Barcode-Leser „Messen/Steuern/Regeln“ Münzzähler Bestellnummer Ordering Code Q62702-P5072 Features • • • • • • Peak wavelength of 950 nm Narrow half angle High radiant intensity Small outline dimensions Same package as phototransistor SFH 3100 F High coupling factor in light barriers with SFH 3100 F • High reliability Applications • • • • • • • Emitter in photointerrupter Tape end detection (VCR e.g.) Data transmission Position sensing Barcode reader For control and drive circuits Coin counters Typ Type SFH 4110 Gehäuse Package Klares Miniatur-Kunststoffgehäuse, seitliche Abstrahlung, Anschlüsse im 2,54-mm Raster, Kathodenkennzeichnung: kurzer Anschluß Clear miniature plastic package, sidelooker, solder tabs 2.54-mm (1/10”), cathode marking: short lead 2001-02-22 1 SFH 4110 Grenzwerte (TA = 25 °C) Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Durchlaßstrom Forward current Stoßstrom, tp = 10 µs, D = 0 Surge current Verlustleistung Power dissipation Wärmewiderstand Sperrschicht - Umgebung Thermal resistance junction - ambient Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Wellenlänge der Strahlung Wavelength at peak emission Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax Abstrahlwinkel Half angle Aktive Chipfläche Active chip area Abmessungen der aktiven Chipfläche Dimensions of the active chip area Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 20 mA, RL = 50 Ω Switching times, Ιe from 10% to 90% and from 90% to 10%, IF = 20 mA, RL = 50 Ω Kapazität, Capacitance VR = 0 V, f = 1 MHz Symbol Symbol λpeak ∆λ ϕ Wert Value 950 55 ±9 0.0625 0.25 × 0.25 450/360 Einheit Unit nm nm Grad deg. mm2 mm ns Symbol Symbol Wert Value – 40 … + 85 3 60 1 100 280 Einheit Unit °C V mA A mW K/W Top; Tstg VR IF (DC) IFSM Ptot RthJA A L×B L×W tr, tf Co 16 pF 2001-02-22 2 SFH 4110 Kennwerte (TA = 25 °C) Characteristics (cont’d) Bezeichnung Parameter Durchlaßspannung, Forward voltage IF = 20 mA, tp = 20 ms Sperrstrom, Reverse current VR = 3 V Gesamtstrahlungsfluß, Total radiant flux IF = 20 mA, tp = 20 ms Temperaturkoeffizient von Ie bzw. Φe, IF = 20 mA Temperature coefficient of Ie or Φe, IF = 20 mA Temperaturkoeffizient von VF, IF = 20 mA Temperature coefficient of VF, IF = 20 mA Temperaturkoeffizient von λ, IF = 20 mA Temperature coefficient of λ, IF = 20 mA Symbol Symbol Wert Value 1.2 (≤ 1.4) Einheit Unit V VF IR 0.01 (≤ 1.0) µA Φe 2 mW TCI – 0.55 %/K TCV TCλ – 1.8 + 0.3 mV/K nm/K Strahlstärke Ie in Achsrichtung gemessen bei einem Raumwinkel Ω = 0.01 sr Radiant Intensity Ie in Axial Direction at a solid angle of Ω = 0.01 sr Bezeichnung Parameter Strahlstärke1) Radiant intensity1) IF = 20 mA, tp = 20 ms 1) 1) Symbol Ie min Werte Values 2.5 Einheit Unit mW/sr Sonderselektion auf Anfrage. Special bin selection on request. 2001-02-22 3 SFH 4110 Relative Spectral Emission Irel = f (λ) 100 % OHR01938 Radiant Intensity Ie = f (IF) Ie 100 mA OHF00369 Single pulse, tp = 20 µs Ι e (100 mA) 10 0 Max. Permissible Forward Current IF = f (T A ) 90 OHF00372 Ιe 10 1 Ι rel Ι F mA 70 R thJA = 280 K/W 60 80 60 50 10 -1 40 40 30 10 -2 20 20 10 0 880 920 960 1000 nm λ 1060 10 -3 -1 10 10 0 10 1 10 2 mA 10 3 ΙF 0 0 20 40 60 80 C TA 120 IF = f (VF), Single pulse, tp = 20 µs ΙF 10 4 mA 10 3 OHF00367 Forward Current Radiation Characteristics Ιrel = f (ϕ) 40˚ 30˚ 20˚ 10˚ 0˚ 1.0 OHF00371 ϕ 50˚ 0.8 10 2 60˚ 10 1 0.6 70˚ 10 0 0.4 80˚ 10 -1 0.2 0 90˚ 10 -2 0 0.5 1 1.5 2 2.5 3 V VF 4 100˚ 1.0 0.8 0.6 0.4 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚ Permissible Pulse Power , Duty cycle D = parameter, TA = 25 °C 10 1 OHF00373 ΙF A 10 0 D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 10 -1 10 -2 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 s tP 10 2 2001-02-22 4 SFH 4110 Maßzeichnung Package Outlines 0.5 (0.020) x 45˚ R 0.9 (0.035) R 0.7 (0.028) Emitter/ Cathode 2.54 (0.100) 3.1 (0.122) 2.9 (0.114) 16.5 (0.650) 16.0 (0.630) 2.2 (0.087) 2.0 (0.079) 1.42 (0.056) 1.22 (0.048) 0.6 (0.024) 0.4 (0.016) 1.04 (0.041) 1.04 (0.041) 4.1 (0.161) 3.9 (0.154) 0.84 (0.033) 0.84 (0.033) 17.77 (0.700) 17.27 (0.680) 3.0 (0.118) 2.8 (0.110) 0.9 (0.035) 0.7 (0.028) 1.6 (0.063) 1.4 (0.055) 1.3 (0.051) 1.1 (0.043) 0.84 (0.033) 0.64 (0.025) 0.5 (0.020) 0.3 (0.012) Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-02-22 5 60˚ GEOY6976