SJ-B1441-FREQ

CRYSTAL CLOCK OSCILLATORS LVCMOS (1.8V) Data Sheet 0210A Rev. C SJ-C1440 Series PRELIMINARY Description The SJ-C1440 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems. Supplying Pin 1 of the SJ-C1440 units with a logic “1" or open enables its pin 3 output. In the disabled mode, pin 3 presents a high impedance to the load. Features • Wide frequency range– 30.0MHz to 100.0MHz • User specified tolerance available • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum • Space-saving alternative to discrete component oscillators • High shock resistance, to 3000g • Metal lid electrically connected to ground to reduce EMI • High Q Crystal actively tuned oscillator circuit Electrical Connection Pin 1 2 3 4 Connection Enable Input Grd & Case Output VDD • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low Jitter - Wavecrest jitter characterization available • 1.8Volt operation • Power supply decoupling internal • No internal PLL avoids cascading PLL problems • Low power consumption • Gold plated leads 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS SJ-C1440 Series LVCMOS Continued Data Sheet 0210A Rev. C Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Tpz Jitter, RMS(2) Enable Voltage Disable Voltage Frequency Stability (1) Symbol Conditions ------------@ VDD /2 VOL @ 600µA VOH @ 600µA tr,tf 10-90% --------------------------------dF/F Overall conditions including: voltage, calibration, temp., 10 yr aging, shock, vibration Min 30.0MHz 45/55% ----VDD-0.2V ------------1.3V -----100ppm Typical --------0.1V VDD-0.1V 1 ns --------------------Max 100.0MHz 55/45% 0.2V ----3.5 ns 100 ns 3 psec ----0.5V +100ppm General Characteristics Parameter Supply Voltage Supply Current Output current Operating temperature Storage temperature Power Dissipation Lead temperature Load Start-up time Symbol VDD IDD IO TA TS PD TL ---tS Conditions ----No Load ----------------Soldering, 10 sec. --------Min 1.71V 0.0 mA 0.0 mA 0°C -55°C ----------------Typical 1.8V 10mA ------------------------2 ms Max 1.89V 20mA ±25.0 mA 70°C 125°C 38 mW 300°C 15pf 10 ms Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz 300°C for 10 seconds Leak rate less than 1 x 10 -8 atm.cc/sec of helium Footnotes: 1) Standard frequency stability (±20,±25,±50ppm & others available) 2) Jitter performance is frequency dependent. Please contact factory for full Wavecrest characterization. Test Load: Creating a Part Number SJ - C144X - FREQ Package Code SJ 4 J Lead SMD Input Voltage Code Specification A 3.3V B 2.5V C 1.8 V 5.0V Tolerance/Performance 0 ±100ppm 0-70°C 1 ±50ppm 0-70°C 7 ±25ppm 0-70°C 9 Customer Specific A ±20ppm 0-70°C B ±50ppm -40 to +85°C C ±100ppm -40 to +85°C 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com