SMP253MA4470M

SMP253 • EMI suppressor, class Y2, metallized paper SMD • 0.001 – 0.0047 µF, 250 VAC, +100 °C H B TYPICAL APPLICATIONS The capacitors are intended for use as interference suppressors in Y2 applications, line-to-earth. CONSTRUCTION Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. 0.5 L 0.5 TECHNICAL DATA Rated voltage Capacitance range Capacitance tolerance Temperature range Climatic category IEC Approvals Dissipation factor tanδ Insulation resistance 250 VAC 50/60 Hz 0.001 – 0.0047 µF ± 20% –40 to +100°C 40/100/56/B S, UL, CSA Components may be vertically mounted for decreased footprint. See page 69. ≤ 1.3 % at 1 kHz ≥ 12000 MΩ Measured at 500 VDC after 60 s, +23°C The 100% screening factory test is carried out at 3000 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. Test voltage between terminals RECOMMENDED SOLDERING CONDITIONS Electrode temperature, Reflow soldering Preheating temperature should be less than 160°C. The time above 180°C should be less than 1 minute. The peak temperature must not exceed 240°C. Temperature (°C) Max 240 °C 250 200 150 100 50 0 Max 160 °C Max 60 s over 180 °C 0 30 60 90 120 150 180 210 240 270 300 t(s) Recommended reflow soldering profile ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6 Test Fc EN 132400 3 directions at 2 hour each 10 – 500 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Active flammability Passive flammability IEC 60384-14 (1993) EN 132400 IEC 60068-2-3 Test Ca +40°C and 90 – 95% R.H. Class B Humidity 56 days 180 SMP253 ARTICLE TABLE Capacitance µF Dimensions in mm ±0.2 mm B H L Quantity per package Bulk Reel Max dU/dt V/µs Approvals CSA UL S Article code CHIP LENGTH 12.7 MM CODE 5045 0.0010 0.0015 0.0022 0.0025 0.0033 0.0039 0.0047 11.5 11.5 11.5 11.5 11.5 11.5 11.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 1000 1000 1000 1000 1000 1000 1000 600 600 600 600 600 600 600 2000 2000 2000 2000 2000 2000 2000 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ SMP253 SMP253 SMP253 SMP253 SMP253 SMP253 SMP253 MA4100M MA4150M MA4220M MA4250M MA4330M MA4390M MA4470M APPROVALS/REFERENCE DOCUMENTS Certification Body S UL cUL recognition (CSA) Specification EN 132400 UL 1414 C 22.2 No. 1 Approval reference 9949069/01 E73869 E73869 • • • • • • MARKING RIFA Article code SMP Rated capacitance Rated voltage Y2 Manufacturing code (year, month) ORDERING INFORMATION See article table and pages 18 to 23 for options and article code construction. Tape packaging, see page 69. 181