TS2GJF150

TS2GJF150 Description TS2GJF150 is a 2GB USB Flash Drive with 1pcs of 2Gx8 (or 2pcs of 1Gx8) Flash Memory assembled on printed circuit board. 2GB USB2.0 JetFlash™150 Features • Color: Silver • USB Interface: Compliant with USB specification 2.0. • Security Function: Password protection provided • Boot-Up Function: Support USB-ZIP/USB-HDD boot-up mode supported Outline • PC-Lock Function: Makes JF150 the key to your computer • No external power or battery needed • LED indicates the usage status. Dimensions Side A B C Millimeters 59 ± 1.00 10 ± 1.00 19 ± 1.00 Inches 2.32 ± 0.04 0.39 ± 0.04 0.75 ± 0.04 Transcend Information Inc. 1 TS2GJF150 Block Diagram •With 1 pcs of 2Gx8 Flash Memory 2GB USB2.0 JetFlash™150 D0~D7 USB 4 Pins Connector USB + USB Flash Disk Connector Other /CE0, /CE1 D0~D7 /CE /WE /RE Flash Memory 2Gx8 •With 2 pcs of 1Gx8 Flash Memory D0~D7 USB 4 Pins Connector USB + USB Flash Disk Connector Other /CE0, /CE1 D0~D7 /CE /WE /RE Flash Memory 1Gx8 D0~D7 /CE2, /CE3 /CE /WE /RE Flash Memory 1Gx8 Transcend Information Inc. 2 TS2GJF150 Pinouts Pin No. 01 02 03 04 2GB USB2.0 JetFlash™150 Pin Identification Pin Name VCC USBUSB+ VSS VSS USB+ Symbol USB- Function USB differential signal: The pairs are used to transmit Data/Address/Command Ground VCC USB power input Specifications Storage Capacity Data Retention Erase Cycles Connector Durability System Performance Power Supply Temperature Range Certificates 2GB 10 years >100,000 times 10,000 times Read: 12MB/sec (max.), Write: 8MB/sec (max.) DC 5V±10% via the USB port Operation: 0-70 C, Non-Operating: -40 C-85 C CE, FCC, BSMI o o o Transcend Information Inc. 3 TS2GJF150 Absolute Maximum Ratings Symbol VCC33 VIN VOUT VCC25 Parameter Power Supply Input Voltage Output Voltage Internal Power Supply Rating -0.3 to 4.0 -0.3 to Vcc+0.3 -0.3 to Vcc+0.3 -0.3 to 3.0 2GB USB2.0 JetFlash™150 Unit V V V V DC Characteristics: TOPR=0℃~70℃；VCC33=3.0V~3.6V；VCC25=2.25V~2.75V Symbol Parameter IIL Input Leakage Current (No pull-up or pull-down) IOZ Tri-State Leakage Current VIL Input Low Voltage VIH Input High Voltage VOL Output Low Voltage (IOL=4mA) VOH Output High Voltage (IOH=4mA) Rt Input pull-up/down resistance (VIL=0V or VIH= VCC) IACT Active Current ISLP Sleep Current Min. -10 -10 2.0 0.4 2.4 40 75 190 73 120 Typ. Max. 10 10 0.8 Units μA μA V V V V KΩ mA μA Recommended Operating Conditions Symbol Parameter VCC33 Power Supply Voltage VIN Input Voltage VCC25 Internal Power Supply Min. 3.0 0 2.25 Typ. 3.3 Vcc 2.5 Max. 3.6 Vcc+0.3 2.75 Units V V V Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes in specifications at any time without prior notice. Transcend Information Inc. 4