UPG2301TQ

DATA SHEET NEC's POWER AMPLIFIER FOR BLUETOOTH™ CLASS 1 FEATURES • OPERATION FREQUENCY fopt = 2,400 to 2,500 MHz (2 450 MHz TYP.) • SUPPLY VOLTAGE VCC1, 2 = Vbias = 2.7 to 3.6 V (3.3 V TYP.) • CONTROL VOLTAGE Vcont = 0 to 3.6 V (2.5 V TYP.) Venable = 0 to 3.1 V (2.9 V TYP.) • CIRCUIT CURRENT ICC = 120 mA TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm • MAXIMUM POWER Pout(MAX.) = +23 dBm TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm • GAIN CONTROL RANGE GCR = 23 dB TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm • POWER GAIN GP = 23 dB TYP.(Reference value) • HIGH EFFICIENCY PAE = 50% TYP.(Reference value) • SHUT DOWN FUNCTION • HIGH-DENSITY SURFACE MOUNTING 10 pin plastic TSON package (2.4 × 2.55 × 0.6 mm) UPG2301TQ DESCRIPTION NEC's µPG2301TQ is a GaAs HBT MMIC for power amplifier for Bluetooth Class 1. This device realizes high efficiency, high gain and high output power by using InGaP HBT. This device is housed in a low profile 10-pin plastic TSON package. APPLICATION • POWER AMPLIFIER FOR BLUETOOTH CLASS 1 • WIRELESS LAN ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Circuit Current Shut Down Current Output Power 1 Output Power 2 Gain Control Range SYMBOL ICC Ishut down Pout1 Pout2 GCR TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 0 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm MIN. 110 TYP. 120 0.1 +23 0 23 MAX. 130 1.0 +24.5 +1 UNIT mA µA dBm dBm dB − +21 − 20 − ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Efficiency Power Gain SYMBOL PAE GP TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = −5 dBm MIN. − − TYP. 50 23 MAX. − − UNIT % dB California Eastern Laboratories UPG2301TQ ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Control Voltage Circuit Current Control Current Power Dissipation Operating Ambient Temperature Storage Temperature Input Power SYMBOL VCC1,2 Vbias Vcont Venable ICC Icont Ienable PD TA Tstg Pin RATINGS 5.0 3.6 400 0.5 700 Note −40 to +85 −55 to +150 +10 UNIT V V mA mA mW °C °C dBm RECOMMENDED OPERATING RANGE (TA = +25°C) PARAMETER Operating Frequency Supply Voltage SYMBOL fopt VCC1,2 Vbias Vcont Venable MIN. TYP. MAX. 2,500 3.6 3.6 3.1 UNIT MHz V 2,400 2,450 2.7 0 0 3.3 2.5 2.9 Control Voltage V Note Mounted on double copper-clad 50 × 50 × 1.6 mm epoxy glass PWB, TA = +85°C PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Top View 10 9 8 7 6 10 Top View 9 8 7 6 6 Bottom View 7 8 9 10 PIN NO. 1 2 3 Bias Circuit 4 5 6 Bias Circuit 7 8 9 1 2 3 4 5 1 2 3 4 5 5 4 3 2 1 10 PIN NAME OUTPUT/ VCC2 Venable Vbias GND VCC1 INPUT Vcont N.C. GND GND 2301 UPG2301TQ ELEVALUATION CIRCUIT (VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz) Vcont INPUT 1 pF 10 9 8 7 6 1.8 nH Bias Circuit Bias Circuit 1,000 pF OUTPUT 1 pF 15 nH 1 2 3 4 5 VCC1 1,000 pF Vbias 1,000 pF VCC2 Venable 1,000 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. UPG2301TQ ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD Vds µ PG2301TQ HBT PA EC-Ver.2 10pin TSON Ven Vc1 Vc2 C4 L1 C3 C2 C1 C5 C6 L2 IN OUT Vct COMPONENT LIST SYMBOL C1, C3, C4, C5 C2, C6 L1 L2 RATING 1,000 pF 1 pF 15 nH 1.8 nH PART NUMBER GRM39CH102J50 GRM39CH010C50 TFL0816-15N TFL0816-1N8 MANUFACTURER muRata muRata Susumu Susumu UPG2301TQ TYPICAL CHARACTERLISTICS Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Pin = +4 dBm, External input and output matching OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. CONTROL VOLTAGE Output Power Pout (dBm), Efficiency PAE (%) 55 50 45 40 35 30 25 20 15 10 5 0 -5 0 160 PAE ICC 140 120 100 80 Pout 60 40 20 0.5 1.0 1.5 2.0 2.5 0 3.0 Circuit Current ICC (mA) Circuit Current ICC (mA) Control Voltage Vcont (V) Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Vcont = 2.5 V, External input and output matching OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. INPUT POWER Output Power Pout (dBm), Efficiency PAE (%) 55 50 45 40 35 30 25 20 15 10 5 0 -15 -10 -5 0 +5 +10 Pout 120 ICC 100 80 60 40 20 0 +15 PAE 160 140 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. UPG2301TQ PACKAGE DIMENSIONS 10-PIN PLASTIC TSON (UNIT: mm) 0.40±0.05 0.18±0.05 (Bottom View) 2.55±0.15 2.25±0.1 (1.95) (0.3) 2.20±0.1 2.40±0.15 (1.70) (0.35) Note () : Reference value ORDERING INFORMATION PART NUMBER µPG2301TQ-E1 PACKAGE 10-pin plastic TSON MARKING 2301 SUPPLYING FORM • Embossed tape 8 mm wide • Pin 5, 6 face the perforation side of the tape • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2301TQ Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. (0.6 MAX.) (0.125) (0.95) 02/04/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.