22224197XXX2

BCcomponents DATA SHEET MKP 416 to 420 Metallized polypropylene filter capacitors Product specification Supersedes data of 2001 Sep 13 File under BCcomponents, BC05 2002 Oct 09 BCcomponents Product specification Metallized polypropylene filter capacitors MKP RADIAL POTTED TYPE MKP 416 to 420 PITCH 5/10/15 mm 296x12(full_width P = 5 mm P = 10 and 15 mm CBB344 Fig.1 Simplified outlines. FEATURES • 5, 10 and 15 mm lead pitch • Supplied loose in box, in ammopack and taped on reel • Intermediate values are available of the E96 series. APPLICATIONS • Low losses due to low contact resistance and low loss dielectric result in applications where high frequency occur or high stability is preferred • Their small dimensions make them suitable for circuits with high packaging density. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-16/101”. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E24 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Rated peak-to-peak voltage Climatic category Rated temperature (DC) Rated temperature (AC) Maximum application temperature Reference specification Performance grade Stability grade Materials 0.001 to 1.2 µF ±5%; ±2% 63 V; 160 V; 250 V; 400 V; 630 V 25 V; 63 V;100 V; 125 V; 160 V 70 V; 180 V; 280 V; 350 V; 450 V 55/085/56 85 °C 85 °C 85 °C IEC 60384-16 grade 1 (long life) grade 1 qualified in accordance with UL94 V-0 VALUE 2002 Oct 09 2 BCcomponents Product specification Metallized polypropylene filter capacitors COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 416 417 5.0/10.0/15.0 mm 5.0/10.0/15.0 mm CAPACITANCE (numerically) MKP 416 to 420 MULTIPLIER (nF) 0.01 0.1 1 2 3 4 Example: 1004 = 100 x 1 = 100 nF 2222 4.. X XXX X TYPE 416 417 PACKAGING Taped Loose in box Taped Loose in box Taped LEAD CONFIGURATION PREFERRED TYPES C-TOL ±2% ±2% ±2% ±2% ON REQUEST ±5% 0 3 4 6 0 3 4 6 ±5% ±2% ±5% ±5% ±5% ±2% ±5% 63 V 1 7 1 7 160 V lead length 3.5 mm lead length 3.5 mm 416 Loose in box Taped lead length 4.0 mm lead length 3.5 mm 417 Loose in box lead length 4.0 mm lead length 3.5 mm 2002 Oct 09 3 BCcomponents Product specification Metallized polypropylene filter capacitors TYPE AND PITCHES 418 419 420 5.0/10.0/15.0 mm 5.0/10.0/15.0 mm 5.0/10.0/15.0 mm CAPACITANCE (numerically) MULTIPLIER (nF) 0.01 0.1 1 2 3 4 Example: 1004 = 100 x 1 = 100 nF 2222 4.. X XXX X TYPE 418 419 420 PACKAGING Taped Loose in box Taped Loose in box Taped Loose in box Taped LEAD CONFIGURATION PREFERRED TYPES C-TOL ±2% ±2% ±2% ±2% ±2% ±2% ON REQUEST ±5% 0 3 4 6 0 3 4 6 0 3 4 6 ±5% ±2% ±5% ±5% ±5% ±2% ±5% ±5% ±5% ±2% ±5% 250 V 1 7 1 7 1 7 400 V 630 V lead length 3.5 mm lead length 3.5 mm lead length 3.5 mm 418 Loose in box Taped lead length 4.0 mm lead length 3.5 mm 419 Loose in box Taped lead length 4.0 mm lead length 3.5 mm 420 Loose in box lead length 4.0 mm lead length 3.5 mm 2002 Oct 09 4 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 GENERAL DATA MKP 416 PITCH 5/10 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.11 µF 0.11 µF < C ≤ 0.18 µF 0.18 µF < C ≤ 0.27 µF Rated voltage pulse slope (dU/dt)R at 63 V (DC): P = 5 mm P = 10 mm R between leads at 50 V; 1 minute R between interconnected leads and case at 50 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 63 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 416 0.... 2222 416 1.... 2222 416 3.... 2222 416 4.... ORDERING on request preferred on request on request 50 V/µs 20 V/µs >100000 MΩ >100000 MΩ 100 V; 1 minute 2840 V; 1 minute at 10 kHz ≤5 × 10−4 ≤10 × ≤10 × 10−4 10−4 VALUE at 100 kHz ≤25 × 10−4 ≤30 × 10−4 ≤35 × 10−4 2002 Oct 09 5 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 63 V; URac = 25 V; Up-p = 70 V MKP 416 CATALOGUE NUMBER 2222 416 ..... AND PACKAGING AMMOPACK C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 5.0 ±0.3 mm; dt = 0.50 ±0.05 mm 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.13 0.15 0.16 0.18 0.20 0.22 0.24 0.27 6.0 × 12.0 × 12.5 1.10 5.0 × 11.0 × 12.5 0.85 11304 11504 11604 11804 12004 12204 12404 12704 500 750 600 1000 6.0 × 11.0 × 7.2 0.60 4.5 × 9.0 × 7.2 0.45 13603 13903 14303 14703 15103 15603 16203 16803 17503 18203 19103 11004 11104 11204 750 1500 1000 2000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 6 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 GENERAL DATA MKP 416 PITCH 15 mm l 296x12(full_width) b h lt P Ødt CBA237 Fig.5 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: 0.3 µF < C ≤ 0.39 µF 0.39 µF < C ≤ 0.56 µF 0.56 µF < C ≤ 0.75 µF 0.75 µF < C ≤ 1.1 µF Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C ≤ 0.33 µF at 50 V; 1 minute RC between leads, for C > 0.33 µF at 50 V; 1 minute R between interconnected leads and case at 50 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 63 V DC versions PACKAGING Taped on reel Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 ±0.3 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 416 0.... 2222 416 1.... 2222 416 6.... 2222 416 7.... ORDERING on request preferred on request preferred at 10 kHz ≤10 × 10−4 ≤10 × ≤10 × ≤10 × 10−4 10−4 10−4 50 V/µs >100000 MΩ >30000 s >100000 MΩ 100 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤40 × 10−4 ≤45 × 10−4 ≤50 × 10−4 ≤60 × 10−4 2002 Oct 09 7 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 63 V; URac = 25 V; Up-p = 70 V MKP 416 CATALOGUE NUMBER 2222 416 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.3 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 0.91 1.0 1.1 10.0 × 16.5 × 17.5 3.1 8.5 × 15.0 × 17.5 2.6 7.0 × 13.5 × 17.5 1.9 6.0 × 12.0 × 17.5 1.4 13004 13304 13604 13904 14304 14704 15104 15604 16204 16804 17504 18204 19104 11005 11105 600 650 800 900 73004 73304 73604 73904 74304 74704 75104 75604 76204 76804 77504 78204 79104 71005 71105 500 750 750 1000 SPQ LOOSE IN BOX lt = 3.5 ±0.3 mm C-tol = ±2% last 5 digits of catalogue number SPQ 2002 Oct 09 8 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 GENERAL DATA MKP 417 PITCH 5/10 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.6 Outline. Specific reference data for the 160 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.027 µF 0.027 µF < C ≤ 0.075 µF 0.075 µF < C ≤ 0.11 µF 0.11 µF < C ≤ 0.18 µF 0.18 µF < C ≤ 0.24 µF Rated voltage pulse slope (dU/dt)R at 160 V (DC): P = 5 mm P = 10 mm R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 160 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 417 0.... 2222 417 1.... 2222 417 3.... 2222 417 4.... ORDERING on request preferred on request on request 50 V/µs 20 V/µs >100000 MΩ >100000 MΩ 260 V; 1 minute 2840 V; 1 minute at 10 kHz ≤5 × 10−4 ≤5 × ≤5 × ≤10 × ≤10 × 10−4 10−4 10−4 10−4 VALUE at 100 kHz ≤15 × 10−4 ≤20 × 10−4 ≤25 × 10−4 ≤30 × 10−4 ≤35 × 10−4 2002 Oct 09 9 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 160 V; URac = 63 V; Up-p = 180 V MKP 417 CATALOGUE NUMBER 2222 417 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 5.0 ±0.3 mm; dt = 0.50 ±0.05 mm 0.024 0.027 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 0.20 0.22 0.24 6.0 × 12.0 × 12.5 1.10 5.0 × 11.0 × 12.5 0.85 4.0 × 10.0 × 12.5 0.60 17503 18203 19103 11004 11104 11204 11304 11504 11604 11804 12004 12204 12404 500 750 600 1000 750 1000 6.0 × 11.0 × 7.2 0.60 4.5 × 9.0 × 7.2 0.45 12403 12703 13003 13303 13603 13903 14303 14703 15103 15603 16203 16803 750 1500 1000 2000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 10 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 417 GENERAL DATA MKP 417 PITCH 15 mm l 296x12(full_width) b h lt P Ødt CBA237 Fig.7 Outline. Specific reference data for the 160 V DC capacitors DESCRIPTION Tangent of loss angle: 0.27 µF < C ≤ 0.39 µF 0.39 µF < C ≤ 0.56 µF 0.56 µF < C ≤ 0.75 µF 0.75 µF < C ≤ 1.1 µF Rated voltage pulse slope (dU/dt)R at 160 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 160 V DC versions PACKAGING Taped on reel Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 ±0.3 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 417 0.... 2222 417 1.... 2222 417 6.... 2222 417 7.... ORDERING on request preferred on request preferred at 10 kHz ≤10 × 10−4 ≤10 × ≤10 × ≤10 × 10−4 10−4 10−4 50 V/µs >100000 MΩ >30000 s >100000 MΩ 260 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤40 × 10−4 ≤45 × 10−4 ≤50 × 10−4 ≤60 × 10−4 2002 Oct 09 11 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 160 V; URac = 63 V; Up-p = 180 V MKP 417 CATALOGUE NUMBER 2222 417 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.27 0.3 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 0.91 1.0 1.1 10.0 × 16.5 × 17.5 3.1 8.5 × 15.0 × 17.5 2.6 7.0 × 13.5 × 17.5 1.9 6.0 × 12.0 × 17.5 1.4 5.0 × 11.0 × 17.5 1.2 12704 13004 13304 13604 13904 14304 14704 15104 15604 16204 16804 17504 18204 19105 11005 11105 600 650 800 900 1100 72704 73004 73304 73604 73904 74304 74704 75104 75604 76204 76804 77504 78204 79105 71005 71105 500 750 750 1000 1250 SPQ LOOSE IN BOX lt = 3.5 ±0.3 mm C-tol = ±2% last 5 digits of catalogue number SPQ 2002 Oct 09 12 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 GENERAL DATA MKP 418 PITCH 5/10 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.8 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.027 µF 0.027 µF < C ≤ 0.075 µF 0.075 µF < C ≤ 0.11 µF 0.11 µF < C ≤ 0.13 µF Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 5 mm P = 10 mm R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 418 0..... 2222 418 1..... 2222 418 3..... 2222 418 4..... ORDERING on request preferred on request on request 50 V/µs 20 V/µs >100000 MΩ >100000 MΩ 400 V; 1 minute 2840 V; 1 minute at 10 kHz ≤5 × 10−4 ≤5 × ≤5 × ≤10 × 10−4 10−4 10−4 VALUE at 100 kHz ≤15 × 10−4 ≤20 × 10−4 ≤25 × 10−4 ≤30 × 10−4 2002 Oct 09 13 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 250 V; URac = 100 V; Up-p = 280 V MKP 418 CATALOGUE NUMBER 2222 418 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 5.0 ±0.3 mm; dt = 0.50 ±0.05 mm 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 6.0 × 12.0 × 12.5 1.10 5.0 × 11.0 × 12.5 0.85 4.0 × 10.0 × 12.5 0.60 14703 15103 15603 16203 16803 17503 18203 19103 11004 11104 11204 11304 500 750 600 1000 750 1000 6.0 × 11.0 × 7.2 0.60 4.5 × 9.0 × 7.2 0.45 3.5 × 8.0 × 7.2 0.35 11003 11103 11203 11303 11503 11603 11803 12003 12203 12403 12703 13003 13303 13603 13903 14303 750 1500 1000 2000 1500 3000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 14 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 418 GENERAL DATA MKP 418 PITCH 15 mm l 296x12(full_width) b h lt P Ødt CBA237 Fig.9 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 0.15 µF < C ≤ 0.3 µF 0.3 µF < C ≤ 0.39 µF 0.39 µF < C ≤ 0.56 µF 0.56 µF < C ≤ 0.68 µF Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING Taped on reel Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 ±0.3 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 418 0..... 2222 418 1..... 2222 418 6..... 2222 418 7..... ORDERING on request preferred on request preferred at 10 kHz ≤10 × 10−4 ≤10 × ≤10 × ≤10 × 10−4 10−4 10−4 50 V/µs >100000 MΩ >30000 s >100000 MΩ 400 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤35 × 10−4 ≤40 × 10−4 ≤45 × 10−4 ≤50 × 10−4 2002 Oct 09 15 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 250 V; URac = 100 V; Up-p = 280 V MKP 418 CATALOGUE NUMBER 2222 418 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.15 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 10.0 × 16.5 × 17.5 3.1 8.5 × 15.0 × 17.5 2.6 7.0 × 13.5 × 17.5 1.9 6.0 × 12.0 × 17.5 1.4 5.0 × 11.0 × 17.5 1.2 11504 11604 11804 12004 12204 12404 12704 13004 13304 13604 13904 14304 14704 15104 15604 16204 16804 600 650 800 900 1100 71504 71604 71804 72004 72204 72404 72704 73004 73304 73604 73904 74304 74704 75104 75604 76204 76804 500 750 750 1000 1250 SPQ LOOSE IN BOX lt = 3.5 ±0.3 mm C-tol = ±2% last 5 digits of catalogue number SPQ 2002 Oct 09 16 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 GENERAL DATA MKP 419 PITCH 5 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.10 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.0091 µF 0.0091 µF < C ≤ 0.02 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 419 0..... 2222 419 1..... 2222 419 3..... 2222 419 4..... ORDERING on request preferred on request on request at 10 kHz ≤5 × 10−4 ≤5 × 10−4 50 V/µs >100000 MΩ >100000 MΩ 640 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤10 × 10−4 ≤15 × 10−4 2002 Oct 09 17 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 400 V; URac = 125 V; Up-p = 350 V MKP 419 CATALOGUE NUMBER 2222 419 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 5.0 ±0.3 mm; dt = 0.50 ±0.05 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 6.0 × 11.0 × 7.2 0.60 4.5 × 9.0 × 7.2 0.45 3.5 × 8.0 × 7.2 0.35 11002 11102 11202 11302 11502 11602 11802 12002 12202 12402 12702 13002 13302 13602 13902 14302 14702 15102 15602 16202 16802 17502 18202 19102 11003 11103 11203 11303 11503 11603 11803 12003 750 1500 1000 2000 1500 3000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 18 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 GENERAL DATA MKP 419 PITCH 10 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.11 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.027 µF 0.027 µF < C ≤ 0.068 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 419 0..... 2222 419 1..... 2222 419 3..... 2222 419 4..... ORDERING on request preferred on request on request at 10 kHz ≤5 × 10−4 ≤5 × 10−4 20 V/µs >100000 MΩ >100000 MΩ 640 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤15 × 10−4 ≤20 × 10−4 2002 Oct 09 19 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 400 V; URac = 125 V; Up-p = 350 V MKP 419 CATALOGUE NUMBER 2222 419 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 6.0 × 12.0 × 12.5 1.10 5.0 × 11.0 × 12.5 0.85 4.0 × 10.0 × 12.5 0.60 12203 12403 12703 13003 13303 13603 13903 14303 14703 15103 15603 16203 16803 500 750 600 1000 750 1000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 20 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 419 GENERAL DATA MKP 419 PITCH 15 mm l 296x12(full_width) b h lt P Ødt CBA237 Fig.12 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: 0.075 µF < C ≤ 0.11 µF 0.11 µF < C ≤ 0.22 µF 0.22 µF < C ≤ 0.36 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnected leads and case at 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Taped on reel Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 ±0.3 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 419 0..... 2222 419 1..... 2222 419 6..... 2222 419 7..... ORDERING on request preferred on request preferred at 10 kHz ≤5 × 10−4 ≤10 × ≤10 × 10−4 10−4 50 V/µs >100000 MΩ >30000 s >100000 MΩ 640 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤25 × 10−4 ≤30 × 10−4 ≤35 × 10−4 2002 Oct 09 21 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 400 V; URac = 125 V; Up-p = 350 V MKP 419 CATALOGUE NUMBER 2222 419 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 10.0 × 16.5 × 17.5 3.1 8.5 × 15.0 × 17.5 2.6 7.0 × 13.5 × 17.5 1.9 6.0 × 12.0 × 17.5 1.4 5.0 × 11.0 × 17.5 1.2 17503 18203 19103 11004 11104 11204 11304 11504 11604 11804 12004 12204 12404 12704 13004 13304 13604 600 650 800 900 1100 77503 78203 79103 71004 71104 71204 71304 71504 71604 71804 72004 72204 72404 72704 73004 73304 73604 500 750 750 1000 1250 SPQ LOOSE IN BOX lt = 3.5 ±0.3 mm C-tol = ±2% last 5 digits of catalogue number SPQ 2002 Oct 09 22 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 GENERAL DATA MKP 420 PITCH 5 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.13 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.0068 µF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 420 0..... 2222 420 1..... 2222 420 3..... 2222 420 4..... ORDERING on request preferred on request on request at 10 kHz ≤5 × 10−4 50 V/µs >100000 MΩ >100000 MΩ 1000 V; 1 minute 1260 V; 1 minute VALUE at 100 kHz ≤10 × 10−4 2002 Oct 09 23 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 630 V; URac = 160 V; Up-p = 450 V MKP 420 CATALOGUE NUMBER 2222 420 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 5.0 ±0.3 mm; dt = 0.50 ±0.05 mm 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 6.0 × 11.0 × 7.2 0.60 4.5 × 9.0 × 7.2 0.45 3.5 × 8.0 × 7.2 0.35 11502 11602 11802 12002 12202 12402 12702 13002 13302 13602 13902 14302 14702 15102 15602 16202 16802 750 1500 1000 2000 1500 3000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 24 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 GENERAL DATA MKP 420 PITCH 10 mm 296x12(full_width) l b h lt P Ødt CBA112 Fig.14 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.027 µF 0.027 µF < C ≤ 0.047 µF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING Ammopack Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/−0.5 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 420 0..... 2222 420 1..... 2222 420 3..... 2222 420 4..... ORDERING on request preferred on request on request at 10 kHz ≤5 × 10−4 ≤5 × 10−4 50 V/µs >100000 MΩ >100000 MΩ 1000 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤15 × 10−4 ≤20 × 10−4 2002 Oct 09 25 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 630 V; URac = 160 V; Up-p = 450 V MKP 420 CATALOGUE NUMBER 2222 420 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 0.047 6.0 × 12.0 × 12.5 1.10 5.0 × 11.0 × 12.5 0.85 4.0 × 10.0 × 12.5 0.60 2222 420 11003 2222 420 11103 2222 420 11203 2222 420 11303 2222 420 11503 2222 420 11603 2222 420 11803 2222 420 12003 2222 420 12203 2222 420 12403 2222 420 12703 2222 420 13003 2222 420 13303 2222 420 13603 2222 420 13903 2222 420 14303 2222 420 14703 500 750 600 1000 750 1000 SPQ SPQ LOOSE IN BOX lt = 4.0 +1.0/−0.5 mm 2002 Oct 09 26 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 420 GENERAL DATA MKP 420 PITCH 15 mm l 296x12(full_width) b h lt P Ødt CBA237 Fig.15 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: 0.051 µF < C ≤ 0.11 µF 0.11 µF < C ≤ 0.16 µF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case at 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING Tapedon reel Loose in box DIMENSIONS H = 18.5 mm; P0 = 12.7 mm; reel diameter 356 mm lt = 3.5 ±0.3 mm C-tol ±5% ±2% ±5% ±2% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 420 0..... 2222 420 1..... 2222 420 6..... 2222 420 7..... ORDERING on request preferred on request preferred at 10 kHz ≤5 × 10−4 ≤10 × 10−4 50 V/µs >100000 MΩ >100000 MΩ 1000 V; 1 minute 1260 V; 1 minute VALUE at 100 kHz ≤25 × 10−4 ≤35 × 10−4 2002 Oct 09 27 BCcomponents Product specification Metallized polypropylene filter capacitors URdc = 630 V; URac = 160 V; Up-p = 450 V MKP 416 to 420 CATALOGUE NUMBER 2222 420 ..... AND PACKAGING REEL C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = ±2% last 5 digits of catalogue number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 10.0 × 16.5 × 17.5 3.1 8.5 × 15.0 × 17.5 2.6 7.0 × 13.5 × 17.5 1.9 6.0 × 12.0 × 17.5 1.4 15103 15603 16203 16803 17503 18203 19103 11004 11104 11204 11304 11504 11604 600 650 800 900 75103 75603 76203 76803 77503 78203 79103 71004 71104 71204 71304 71504 71604 500 750 750 1000 SPQ LOOSE IN BOX lt = 3.5 ±0.3 mm C-tol = ±2% last 5 digits of catalogue number SPQ 2002 Oct 09 28 BCcomponents Product specification Metallized polypropylene filter capacitors CONSTRUCTION Description • Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case • Radial leads, solder-coated – Copper clad steel wire for pitch = 2e, 4e and 6e (case size 1750 and 1760) – Copper wire pitch = 6e (case size 1770, 1785 and 1710) • Solder-plated copper-clad steel wire to ensure good resistance to soldering heat • Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. MKP 416 to 420 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. The capacitors shall be mechanically fixed by the leads. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.17: • Eccentricity as in Fig.17. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. • Product height with seating plane as given by “IEC 60717” as reference: hmax ≤ h + 0.3 mm. MKP 144x12(halfpage) metallised polypropylene film 144x12(halfpage) bmax = b + 0.3 mm eccentricity lmax = l + 0.3 mm CBA116 Fig.17 Lay-out. metal spray layer Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. connecting wire CBA333 Fig.16 Construction. Mounting NORMAL USE The capacitors are designed for printed-circuit board applications. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to this handbook, chapter “Packaging information”. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply at an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 2002 Oct 09 29 BCcomponents Product specification Metallized polypropylene filter capacitors CHARACTERISTICS Capacitance MKP 416 to 420 2 296x12(full_width) ∆C/C (%) CBA901 0 max. typical -2 min. -40 0 40 80 Tamb (°C) Fig.18 Capacitance change at 1 kHz as a function of temperature. Impedance CBB021 296x12(full_width) 10 2 impedance (Ω) 10 1 10 0 10 -1 100 nF 10 -2 1.0 µF 10 nF 10 -3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.19 Impedance as a function of frequency; typical curves. 2002 Oct 09 30 BCcomponents Product specification Metallized polypropylene filter capacitors Maximum RMS voltage (sinewave) as a function of frequency MKP 416 to 420 296x12(full_width) 10 2 AC voltage (V) CBA593 10 1 22 10 00 nF 4 10 7 n 0F nF 0 nF 10 0 10 3 10 4 10 5 10 6 f (Hz) 10 7 Fig.20 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 63 V. 296x12(full_width) 10 2 AC voltage (V) CBA594 10 1 47 10 0 nF nF 22 0 24 nF nF 10 00 nF 10 0 10 3 10 4 10 5 10 6 f (Hz) 10 7 Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 160 V. 2002 Oct 09 31 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 296x12(full_width) 10 3 AC voltage (V) CBA595 10 2 10 1 22 nF 47 nF 100 nF 470 nF 10 0 3 10 10 4 10 5 10 6 f (Hz) 10 7 Fig.22 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 250 V. 296x12(full_width) 10 3 AC voltage (V) CBA596 10 2 2.2 nF 4.7 nF 10 1 10 nF 22 nF 47 nF 330 nF 10 0 10 3 10 4 10 5 10 6 f (Hz) 10 7 Fig.23 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 400 V. 2002 Oct 09 32 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 296x12(full_width) 10 3 AC voltage (V) CBA597 10 2 10 1 10 nF 22 nF 47 nF 100 nF 10 0 3 10 10 4 10 5 10 6 f (Hz) 10 7 Fig.24 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 630 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 20 to 24. 2002 Oct 09 33 BCcomponents Product specification Metallized polypropylene filter capacitors Tangent of loss angle MKP 416 to 420 296x12(full_width) 10 2 dissipation factor (x10 -4) CBA506 10 1 10 0 10 3 10 4 10 5 f (Hz) 10 6 Fig.25 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance CBA204 296x12(full_width) 10 6 RC (s) 10 5 10 4 0 20 40 60 80 Tamb(°C) 100 Fig.26 RC product as a function of ambient temperature; typical curve. 2002 Oct 09 34 BCcomponents Product specification Metallized polypropylene filter capacitors MKP 416 to 420 Maximum allowed component temperature rise (DT) as a function of the ambient temperature (Tamb) 12 296x12(full_width) ∆T (°C) 10 8 6 4 2 0 -60 CBA850 -40 -20 0 20 40 60 80 Tamb (°C) 100 Fig.27 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/×C Table 1 Heat conductivity bmax (mm) 3.5 4.0 4.5 5.0 6.0 7.0 8.5 10.0 PITCH (mm) 5 3.0 − 4.0 − 5.5 − − − 10 − 6.5 − 7.5 9.0 − − − 15 − − − 10 11 12 16 18 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (DT) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆ T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C). 2002 Oct 09 35 BCcomponents Product specification Metallized polypropylene filter capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.28. MKP 416 to 420 144x12(halfpage) thermocouple CBA758 Fig.28 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by ∆ T = T c – T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 2002 Oct 09 36 BCcomponents Product specification Metallized polypropylene filter capacitors Application note and limiting conditions MKP 416 to 420 These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU dU 2 2 × ∫  -------  × dt < U Rdc ×  -------   dt  rated  dt  0 T T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.27. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 “Heat conductivity”. 6. When using these capacitors in the input filters or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains or line card supply included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS -overvoltage (