26PC01SMT

Microstructure Pressure Sensors 26PC SMT (1 psi, 5 psi, 15 psi) FEATURES • Alignment pins for position accuracy • Small package size (less than one half the size of the 26PC) and compact surface mount profile • 3,18 mm [0.125 in] diameter pick-up feature for use in pick and place machines • Max peak reflow temperature of 260 °C [500 °F] • Gage, vacuum gage, differential, wet/wet differential sensing available in one package • True wet/wet differential sensing • Proven elastomeric interconnections of the 20PC family • Temperature compensation • End point calibration • Sensor consists of only five components • Elastomeric construction • Wide operating temperature range of -40 °C to 85 °C [-40 °F to 185 °F] TYPICAL APPLICATIONS • Blood glucose monitors • Oxygen conservers • Infusion pumps • Ventilators • CPAP (Continuous Positive Airway Pressure) equipment • Residential fuel cells 26PC SMT Series The 26PC SMT (Surface Mount Technology) Series pressure sensor, the first offering in the 20PC SMT family of pressure sensors, is a small, low cost, high value, pressure sensing solution for use with printed circuit boards (PCBs). Based on the long established reliability and accuracy of the 26PC pressure sensor, the 26PC SMT offers reduced size with true SMT capability. The smaller size reduces the sensor’s footprint on the PCB, thereby reducing the size of the PCB. The 26PC SMT is the first pressure sensor capable of being used with other SMT components on the PCB, helping to lower installation costs and eliminate secondary operations. The sensor features Wheatstone bridge construction, silicon piezoresistive technology, and ratiometric output for proven application flexibility, design simplicity and ease of manufacture. Although primarily designed for the medical industry, the 20PC SMT pressure sensor may be applied in any industry that requires a surface mount pressure sensor. WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as system installation information. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Microstructure Pressure Sensors 26PC SMT (1 psi, 5 psi, 15 psi) 2 6PC SMT Series 26PC SMT PERFORMANCE CHARACTERISTICS (AT 10 VDC ± 0.01 VDC EXCITATION, 25 ° C) Min. Typ. Max. Units Excitation Voltage — 10.0 16.0 Vdc R esponse Time — — 1.0 ms Input Resistance 5.5 k 7.5 k 11.5 k Ohm Output Resistance 1.5 k 2.5 k 3.0 k Ohm Span P2>P1(1) Min. Typ. Max. 0 to 1 14.7 16.7 18.7 mV 0 to 5 47 50 53 mV 0 to 15 96 100 104 mV Null Offset Min. Typ. Max. 0 to 1 -2.0 0 +2.0 mV 0 to 5 -2.0 0 +2.0 mV 0 to 15 -2.0 0 +2.0 mV Linearity (BFSL P2>P1) Typ. Max. 0 to 1 — ± 0.50 ± 1.75 % span 0 to 5 — ± 0.50 ± 1.5 % span 0 to 15 — ± 0.50 ± 1.0 % span Null Shift 25 ° C to 0 ° C, 25 ° C to 50° C(2) Typ. Max. 0 to 1 — — ± 1.0 mV 0 to 5 — — ± 1.0 mV 0 to 15 — — ± 1.0 mV Span Shift 25 ° C to 0 ° C, 25 ° C to 50° C(2) Typ. Max. 0 to 1 — ± 1.5 ± 4.5 % span 0 to 5 — ± 1.0 ± 1.7 % span 0 to 15 — ± 0.75 ± 1.5 % span Repeatability and Hysteresis Typ. Max. 0 to 1 — ± 0.2 — % span 0 to 5 — ± 0.2 — % span 0 to 15 — ± 0.2 — % span Overpressure P2>P1; P1>P2 Typ. Max. 0 to 1 — — 20 psi 0 to 5 — — 20 psi 0 to 15 — — 45 psi N otes: 1. Span is the algebraic difference between output at maximum rated operating pressures and output at 0 psi. 2. Temperature error is calculated with respect to 25 °C. SPECIFICATIONS Characteristic Storage Temperature Operating Temperature Compensated Te mperature Alignment Pins Port Diameter Port Orientation Pick Up Feature SMT Solder SMT Reflow Profile Media Compatibility Shock Vibration Weight Description -55 °C to 100 °C [-67 °F to 212 °F] -40 °C to 85 °C [-40 °F to 185 °F] 0 °C to 50 °C [32 °F to 122 °F] 0,86 mm [0.034 in] diameter pins extend through PCB 1,88 mm [0.074 in] diameter uses standard 0,59 mm [0.0625 in] ID tubing Parallel to PCB (low profile on board) 3,18 mm [0.125 in] feature on port cover • Sn 96.5 Ag 3.5 No Clean Flux • Sn 63 Pb 37 No Clean Flux Max peak temperature of 260 °C [500 °F] for 10 seconds Both ports are limited to media that are compatible with polyphthalamide, fluorosilicone and silicon. Qualification tested to 150 g MIL-STD-202. Method 213 (150 g half sine 11 ms) 0.5 grams [0.0176 oz] www.honeywell.com/sensing 2 Honeywell • Sensing and Control Microstructure Pressure Sensors 26PC SMT (1 psi, 5 psi, 15 psi) MOUNTING DIMENSIONS mm[in] (for reference only) 2 6PC SMT Series 2 6,10 [0.240] 3 1,02 [0.040] 7,11 5,08 [0.280] [0.200] 3,18 [0.125] 1 4 2X 1,88 [0.074] P2 P1 1,91 [0.075] 2,74 [0.108] 7,87 [0.31] 3,81 [0.15] 4,83 [0.190] 2X 1,40 [0.055] 10,41 [0.41] 2X 0,94 [0.037] 0,13 [0.005] 0,41 [0.016] 2X 0,86 [0.034] 5,08 [0.200] SUGGESTED LAND PATTERN 4X 1,83 [0.072] 2X 0,99 [0.039] CIRCUIT DIAGRAM OUTPUT VOLTAGE Output A increases as P2 pressure increases. Output B decreases as P2 pressure increases. 5,08 [0.200] 1 Vcc 2 OUTPUT A 3 GND 4 OUTPUT B 6,73 [0.265] 11,23 [0.442] www.honeywell.com/sensing Honeywell • Sensing and Control 3 Microstructure Pressure Sensors 26PC SMT (1 psi, 5 psi,15 psi) DATE CODE ______ Week: Two Digits Year: Four Digits CATALOG LISTING NOMENCLATURE 26 PC __ SMT 2 6PC SMT Series Package Style: SMT (Surface Mount Technology) Pressure Range: 01 = 1 psi 05 = 5 psi 15 = 15 psi Family: PC Type: Compensated BRANDING SCHEME 6 __ F Seal: Fluorosilicone Pressure Range: 01 = 1 psi 05 = 5 psi 15 = 15 psi Type: Compensated TECHNICAL NOTES Technical Notes that provide further application information on the 26PC SMT are available on the Honeywell web site at: http://www.honeywell.com/sensing/prodinfo/pressure/20pc WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, or name of the nearest Authorized Distributor, check the Honeywell web site or call: 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET www.honeywell.com/sensing info.sc@honeywell.com Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032 P rinted with Soy Ink on 50% Recycled Paper www.honeywell.com/sensing 008065-1-EN IL50 GLO 0601 Printed in USA