307-014-525103

307/357 SERIES CARD EDGE CONNECTOR .156" (3.96mm) Contact Spacing Example Part Number 307 - 044 - 520 - 2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options Series 30 7 35 7 Total Number of Contacts1 006, 007,...044 012, 014,...088 Insulator Colour Green Black Contact Rows Single Row Dual Row 307/357 SERIES ORDERING CODE CSA Approved and UL Recognized .156 (3.96) Contact Spacing x .200 (5.08) Row Spacing Accepts .062 (1.57) Nominal Thickness P.C. Board Low Profile Insulator Body, .460 (11.68) Contact Termination Options include P.C. Tail, Wire Hole, Wire Wrap, 90 Degree & Extender Board Bends ● Single or Dual Row Configurations ● Large Variety of Mounting Options ● Pre-assembled Card Guides Available ● Accepts Between Contact and In-Contact Polarizing Keys ● ● ● ● ● FEATURES ◆ Insulator Material: Thermoplastic Polyester, UL 94V-0 ◆ Contact Material: Copper, Nickel, Tin Alloy CA-725 ◆ Contact Plating: Gold on the Mating Area, Tin on the Contact Tails, Nickel Underplate ◆ Current Rating: 5 Amperes Continuous ◆ Contact Resistance: 10 Milliohms Maximum ◆ Dielectric Withstanding Voltage: 1800 V AC rms at Sea Level Between Adjacent Contacts ◆ Insulation Resistance: 5000 Megohms Minimum ◆ Operating Temperature: -65 to +105 Degrees C ◆ Insertion Force: 16 oz (4.45 N) Maximum per Contact Pair when Tested with a .070 (1.78) Thick Gauge ◆ Withdrawal Force: 1 oz (0.28 N) Minimum per Contact Pair when Tested with a .054 (1.37) Thick Gauge Ordering Code Notes 1 ) All connector sizes up to 44 contacts single row / 88 contacts dual row are available upon request. 2 ) For contacts with overall tin-lead plating, change the first digit of the contact code from 5 to 4. 3 ) Single row contacts that read both sides of the daughter board are phosphor bronze CA-510 material with entire surface plated gold over nickel. 4 ) For details of the extender board and 90 degree bends, refer to page 66. 5 ) Switching contacts, assembled in specific contact positions, are available upon request. 6 ) For details of the mounting options, refer to page 68. SPECIFICATIONS Contact Code 2, 3, 4, 5 Description & Tail Size Tail Length "G" Single Row Contacts - Read One Side of Daughter Board 50 5 Wire Hole.087 x .013 (2.21 x 0.33) .282 (7.16) P.C. Tail .046 x .013 (1.17 x 0.33) .213 (5.41) 52 5 52 7 P.C. Tail .046 x .013 (1.17 x 0.33) .358 (9.09) P.C. Tail .023 x .013 (0.58 x 0.33) .213 (5.41) 53 1 Wire Wrap.046 x .013 (1.17 x 0.33) .708(17.98) 54 5 Wire Wrap.046 x .013 (1.17 x 0.33) .520(13.21) 54 7 55 8 90 Degree Bend (Code 545 Contacts) 90 Degree Bend (Code 527 Contacts) 55 9 Single Row Contacts - Read Both Sides of Daughter Board 50 1 Wire Hole.089 x .014 (2.29 x 0.36) .213 (5.41) 52 1 P.C. Tail .046 x .014 (1.17 x 0.36) .213 (5.41) Wire Wrap.046 x .014 (1.17 x 0.36) .495(12.57) 54 1 90 Degree Bend (Code 521 Contacts) 55 3 90 Degree Bend (Code 501 Contacts) 55 4 90 Degree Bend (Code 541 Contacts) 55 7 Dual Row Contacts - Read Both Sides of Daughter Board 50 0 Wire Hole.087 x .013 (2.21 x 0.33) .282 (7.16) P.C. Tail .046 x .013 (1.17 x 0.33) .213 (5.41) 52 0 P.C. Tail .046 x .013 (1.17 x 0.33) .358 (9.09) 52 2 P.C. Tail .023 x .013 (0.58 x 0.33) .213 (5.41) 52 4 Wire Wrap.046 x .013 (1.17 x 0.33) .708(17.98) 54 0 Wire Wrap.046 x .013 (1.17 x 0.33) .520(13.21) 54 2 Extender Board Bend (Code 500 Contacts) 55 5 Extender Board Bend (Code 520 Contacts) 55 6 90 Degree Bend (Code 522 and 540 Contacts) 55 8 90 Degree Bend (Code 522 and 540 Contacts) 55 9 Extender Board Bend (Code 522 Contacts) 56 0 Contact Rows 1 2 Mounting Options 6 01 02 03 04 07 08 12 58 68 78 Description Single Row Dual Row Description No Mounting Lugs .128 (3.25) Dia. Mounting Holes .116 (2.95) I.D. Floating Eyelets .156 (3.96) Dia. Mounting Holes M3-0.5 Metric Threaded Inserts #4-40 Unified Threaded Inserts .128 (3.25) Dia. Side Mounting Holes .468 (11.89) Offset Card Guides .344 (8.74) Offset Card Guides In-Line Card Guides Page 40 Tel: (416) 754 - 3322 CARD EDGE CONNECTOR SERIES 307/357 Contact Spacing .156" (3.96mm) NUMBER OF CONTACTS Single 6 8 10 12 15 18 20 22 25 28 30 36 43 44 Dual 12 16 20 24 30 36 40 44 50 56 60 72 86 88 Inch 1.842 2.154 2.466 2.778 3.246 3.714 4.026 4.338 4.806 5.274 5.586 6.522 7.614 7.770 "A" (mm) (46.79) (54.71) (62.64) (70.56) (82.45) (94.34) (102.26) (110.19) (122.07) (133.96) (141.88) (165.66) (193.40) (197.36) Inch 1.532 1.844 2.156 2.468 2.936 3.404 3.716 4.028 4.496 4.964 5.276 6.212 7.304 7.460 "B" (mm) (38.91) (46.84) (54.76) (62.69) (74.57) (86.46) (94.39) (102.31) (114.20) (126.09) (134.01) (157.78) (185.52) (189.48) Inch 1.246 1.558 1.870 2.182 2.650 3.118 3.430 3.742 4.210 4.678 4.990 5.926 7.018 7.174 "C" (mm) (31.65) (39.57) (47.50) (55.42) (67.31) (79.20) (87.12) (95.05) (106.93) (118.82) (126.75) (150.52) (178.26) (182.22) Inch 1.100 1.412 1.724 2.036 2.504 2.972 3.284 3.596 4.064 4.532 4.844 5.780 6.872 7.028 "D" (mm) (27.94) (35.86) (43.79) (51.71) (63.60) (75.49) (83.41) (91.34) (103.23) (115.11) (123.04) (146.81) (174.55) (178.51) Inch .780 1.092 1.404 1.716 2.184 2.652 2.964 3.276 3.744 4.212 4.524 5.460 6.552 6.708 "E" (mm) (19.81) (27.74) (35.66) (43.59) (55.47) (67.36) (75.29) (83.21) (95.10) (106.98) (114.91) (138.68) (166.42) (170.38) Dimensions of Other Connector Sizes are Listed on Page 74 Fax: (416) 754 - 3299 Page 41 .156" (3.96mm) CONTACT SPACING CONNECTOR DIMENSIONS 303, 305, 306, 307, 315, 316, 317, 333, 336, 337, 355, 356, 357, 387, 737 Series Card Edge Connectors DIMENSION SERIES Number of Contacts Single Dual 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 "A" 317 333 336 REST OF SERIES 317 "B" 333, 336 REST OF SERIES Inch 1.830 1.986 2.142 2.298 2.454 2.610 2.766 2.922 3.078 3.234 3.390 3.546 3.702 3.858 4.014 4.170 4.326 4.482 4.638 4.794 4.950 5.106 5.262 5.418 5.574 5.730 5.886 6.042 6.198 6.354 6.510 6.666 6.822 6.978 7.134 7.290 7.446 7.602 (mm) (46.48) (50.44) (54.41) (58.37) (62.33) (66.29) (70.26) (74.22) (78.18) (82.14) (86.11) (90.07) (94.03) (97.99) (101.96) (105.92) (109.88) (113.84) (117.81) (121.77) (125.73) (129.69) (133.65) (137.62) (141.58) (145.54) (149.50) (153.47) (157.43) (161.39) (165.35) (169.32) (173.28) (177.24) (181.20) (185.17) (189.13) (193.09) Inch 1.784 1.940 2.096 2.252 2.408 2.564 2.720 2.876 3.032 3.188 3.344 3.500 3.656 3.812 3.968 4.124 4.280 4.436 4.592 4.748 4.904 5.060 5.216 5.372 5.528 5.684 5.840 5.996 6.152 6.308 6.464 6.620 6.776 6.932 7.088 7.244 7.400 7.556 (mm) (45.31) (49.28) (53.24) (57.20) (61.16) (65.13) (69.09) (73.05) (77.01) (80.98) (84.94) (88.90) (92.86) (96.82) (100.79) (104.75) (108.71) (112.67) (116.64) (120.60) (124.56) (128.52) (132.49) (136.45) (140.41) (144.37) (148.34) (152.30) (156.26) (160.22) (164.19) (168.15) (172.11) (176.07) (180.04) (184.00) (187.96) (191.92) Inch 1.857 2.013 2.169 2.325 2.481 2.637 2.793 2.949 3.105 3.261 3.417 3.573 3.729 3.885 4.041 4.197 4.353 4.509 4.665 4.821 4.977 5.133 5.289 5.445 5.601 5.757 5.913 6.069 6.225 6.381 6.537 6.693 6.849 7.005 7.161 7.317 7.473 7.629 (mm) (47.17) (51.13) (55.09) (59.06) (63.02) (66.98) (70.94) (74.90) (78.87) (82.83) (86.79) (90.75) (94.72) (98.68) (102.64) (106.60) (110.57) (114.53) (118.49) (122.45) (126.42) (130.38) (134.34) (138.30) (142.27) (146.23) (150.19) (154.15) (158.12) (162.08) (166.04) (170.00) (173.96) (177.93) (181.89) (185.85) (189.81) (193.78) Inch 1.842 1.998 2.154 2.310 2.466 2.622 2.778 2.934 3.090 3.246 3.402 3.558 3.714 3.870 4.026 4.182 4.338 4.494 4.650 4.806 4.962 5.118 5.274 5.430 5.586 5.742 5.898 6.054 6.210 6.366 6.522 6.678 6.834 6.990 7.146 7.302 7.458 7.614 7.770 (mm) (46.79) (50.75) (54.71) (58.67) (62.64) (66.60) (70.56) (74.52) (78.49) (82.45) (86.41) (90.37) (94.34) (98.30) (102.26) (106.22) (110.19) (114.15) (118.11) (122.07) (126.03) (130.00) (133.96) (137.92) (141.88) (145.85) (149.81) (153.77) (157.73) (161.70) (165.66) (169.62) (173.58) (177.55) (181.51) (185.47) (189.43) (193.40) (197.36) Inch 1.539 1.695 1.851 2.007 2.163 2.319 2.475 2.631 2.787 2.943 3.099 3.255 3.411 3.567 3.723 3.879 4.035 4.191 4.347 4.503 4.659 4.815 4.971 5.127 5.283 5.439 5.595 5.751 5.907 6.063 6.219 6.375 6.531 6.687 6.843 6.999 7.155 7.311 (mm) (39.09) (43.05) (47.02) (50.98) (54.94) (58.90) (62.87) (66.83) (70.79) (74.75) (78.71) (82.68) (86.64) (90.60) (94.56) (98.53) (102.49) (106.45) (110.41) (114.38) (118.34) (122.30) (126.26) (130.23) (134.19) (138.15) (142.11) (146.08) (150.04) (154.00) (157.96) (161.93) (165.89) (169.85) (173.81) (177.77) (181.74) (185.70) Inch 1.534 1.690 1.846 2.002 2.158 2.314 2.470 2.626 2.782 2.938 3.094 3.250 3.406 3.562 3.718 3.874 4.030 4.186 4.342 4.498 4.654 4.810 4.966 5.122 5.278 5.434 5.590 5.746 5.902 6.058 6.214 6.370 6.526 6.682 6.838 6.994 7.150 7.306 (mm) (38.96) (42.93) (46.89) (50.85) (54.81) (58.78) (62.74) (66.70) (70.66) (74.63) (78.59) (82.55) (86.51) (90.47) (94.44) (98.40) (102.36) (106.32) (110.29) (114.25) (118.21) (122.17) (126.14) (130.10) (134.06) (138.02) (141.99) (145.95) (149.91) (153.87) (157.84) (161.80) (165.76) (169.72) (173.69) (177.65) (181.61) (185.57) Inch 1.532 1.688 1.844 2.000 2.156 2.312 2.468 2.624 2.780 2.936 3.092 3.248 3.404 3.560 3.716 3.872 4.028 4.184 4.340 4.496 4.652 4.808 4.964 5.120 5.276 5.432 5.588 5.744 5.900 6.056 6.212 6.368 6.524 6.680 6.836 6.992 7.148 7.304 7.460 (mm) (38.91) (42.88) (46.84) (50.80) (54.76) (58.72) (62.69) (66.65) (70.61) (74.57) (78.54) (82.50) (86.46) (90.42) (94.39) (98.35) (102.31) (106.27) (110.24) (114.20) (118.16) (122.12) (126.09) (130.05) (134.01) (137.97) (141.94) (145.90) (149.86) (153.82) (157.78) (161.75) (165.71) (169.67) (173.63) (177.60) (181.56) (185.52) (189.48) Page 74 Tel: (416) 754 - 3322 CONNECTOR DIMENSIONS CONTACT SPACING .156" (3.96mm) Card Edge Connector Series 303, 305, 306, 307, 315, 316, 317, 333, 336, 337, 355, 356, 357, 387, 737 DIMENSION SERIES Number of Contacts Single Dual 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 "C" 333 336 REST OF SERIES 315, 316 "D" REST OF SERIES "E" ALL SERIES 303, 317 Inch 1.220 1.376 1.532 1.688 1.844 2.000 2.156 2.312 2.468 2.624 2.780 2.936 3.092 3.248 3.404 3.560 3.716 3.872 4.028 4.184 4.340 4.496 4.652 4.808 4.964 5.120 5.276 5.432 5.588 5.744 5.900 6.056 6.212 6.368 6.524 6.680 6.836 6.992 (mm) (30.99) (34.95) (38.91) (42.88) (46.84) (50.80) (54.76) (58.72) (62.69) (66.65) (70.61) (74.57) (78.54) (82.50) (86.46) (90.42) (94.39) (98.35) (102.31) (106.27) (110.24) (114.20) (118.16) (122.12) (126.09) (130.05) (134.01) (137.97) (141.94) (145.90) (149.86) (153.82) (157.78) (161.75) (165.71) (169.67) (173.63) (177.60) Inch 1.261 1.417 1.573 1.729 1.885 2.041 2.197 2.353 2.509 2.665 2.821 2.977 3.133 3.289 3.445 3.601 3.757 3.913 4.069 4.225 4.381 4.537 4.693 4.849 5.005 5.161 5.317 5.473 5.629 5.785 5.941 6.097 6.253 6.409 6.565 6.721 6.877 7.033 (mm) (32.03) (35.99) (39.95) (43.92) (47.88) (51.84) (55.80) (59.77) (63.73) (67.69) (71.65) (75.62) (79.58) (83.54) (87.50) (91.47) (95.43) (99.39) (103.35) (107.32) (111.28) (115.24) (119.20) (123.16) (127.13) (131.09) (135.05) (139.01) (142.98) (146.94) (150.90) (154.86) (158.83) (162.79) (166.75) (170.71) (174.68) (178.64) Inch 1.216 1.372 1.528 1.684 1.840 1.996 2.152 2.308 2.464 2.620 2.776 2.932 3.088 3.244 3.400 3.556 3.712 3.868 4.024 4.180 4.336 4.492 4.648 4.804 4.960 5.116 5.272 5.428 5.584 5.740 5.896 6.052 6.208 6.364 6.520 6.676 6.832 6.988 (mm) (30.89) (34.85) (38.81) (42.77) (46.74) (50.70) (54.66) (58.62) (62.59) (66.55) (70.51) (74.47) (78.44) (82.40) (86.36) (90.32) (94.28) (98.25) (102.21) (106.17) (110.13) (114.10) (118.06) (122.02) (125.98) (129.95) (133.91) (137.87) (141.83) (145.80) (149.76) (153.72) (157.68) (161.65) (165.61) (169.57) (173.53) (177.50) Inch 1.246 1.402 1.558 1.714 1.870 2.026 2.182 2.338 2.494 2.650 2.806 2.962 3.118 3.274 3.430 3.586 3.742 3.898 4.054 4.210 4.366 4.522 4.678 4.834 4.990 5.146 5.302 5.458 5.614 5.770 5.926 6.082 6.238 6.394 6.550 6.706 6.862 7.018 7.174 (mm) (31.65) (35.61) (39.57) (43.54) (47.50) (51.46) (55.42) (59.39) (63.35) (67.31) (71.27) (75.23) (79.20) (83.16) (87.12) (91.08) (95.05) (99.01) (102.97) (106.93) (110.90) (114.86) (118.82) (122.78) (126.75) (130.71) (134.67) (138.63) (142.60) (146.56) (150.52) (154.48) (158.45) (162.41) (166.37) (170.33) (174.29) (178.26) (182.22) Inch 1.080 1.236 1.392 1.548 1.704 1.860 2.016 2.172 2.328 2.484 2.640 2.796 2.952 3.108 3.264 3.420 3.576 3.732 3.888 4.044 4.200 4.356 4.512 4.668 4.824 4.980 5.136 5.292 5.448 5.604 5.760 5.916 6.072 6.228 6.384 6.540 6.696 6.852 (mm) (27.43) (31.39) (35.36) (39.32) (43.28) (47.24) (51.21) (55.17) (59.13) (63.09) (67.06) (71.02) (74.98) (78.94) (82.91) (86.87) (90.83) (94.79) (98.76) (102.72) (106.68) (110.64) (114.60) (118.57) (122.53) (126.49) (130.45) (134.42) (138.38) (142.34) (146.30) (150.27) (154.23) (158.19) (162.15) (166.12) (170.08) (174.04) Inch 1.100 1.256 1.412 1.568 1.724 1.880 2.036 2.192 2.348 2.504 2.660 2.816 2.972 3.128 3.284 3.440 3.596 3.752 3.908 4.064 4.220 4.376 4.532 4.688 4.844 5.000 5.156 5.312 5.468 5.624 5.780 5.936 6.092 6.248 6.404 6.560 6.716 6.872 7.028 (mm) (27.94) (31.90) (35.86) (39.83) (43.79) (47.75) (51.71) (55.68) (59.64) (63.60) (67.56) (71.53) (75.49) (79.45) (83.41) (87.38) (91.34) (95.30) (99.26) (103.23) (107.19) (111.15) (115.11) (119.08) (123.04) (127.00) (130.96) (134.92) (138.89) (142.85) (146.81) (150.77) (154.74) (158.70) (162.66) (166.62) (170.59) (174.55) (178.51) Inch .780 .936 1.092 1.248 1.404 1.560 1.716 1.872 2.028 2.184 2.340 2.496 2.652 2.808 2.964 3.120 3.276 3.432 3.588 3.744 3.900 4.056 4.212 4.368 4.524 4.680 4.836 4.992 5.148 5.304 5.460 5.616 5.772 5.928 6.084 6.240 6.396 6.552 6.708 (mm) (19.81) (23.77) (27.74) (31.70) (35.66) (39.62) (43.59) (47.55) (51.51) (55.47) (59.44) (63.40) (67.36) (71.32) (75.29) (79.25) (83.21) (87.17) (91.14) (95.10) (99.06) (103.02) (106.98) (110.95) (114.91) (118.87) (122.83) (126.80) (130.76) (134.72) (138.68) (142.65) (146.61) (150.57) (154.53) (158.50) (162.46) (166.42) (170.38) Fax: (416) 754 - 3299 Page 75 MOUNTING OPTIONS - CARD EDGE CONNECTORS Standard Mounting Details CODE x01 - NO MOUNTING LUGS q Applicable for 303, 305, 306, 307, 310, 315, 316, 317, 321, 325, 327, 333, 336, 337, 338, 340, 341, 342, 345, 346, 355, 356, 357, 379, 384, 387, 391, 392, 395 and 396 Series CODE x02, x04 & x09 - THROUGH MOUNTING HOLES Applicable Series 303, 305, 306, 307, 310, 315, 316,321, 333, 337, 338, 340, 341, 345,346, 355, 356, 357, 379, 384, 387,391, 395, 396 317, 323 325 327 336 342, 392 Code x02 "A" Dia. .128 (3.25) Code x04 "A" Dia. .156 (3.96) Code x09 "A" Dia. — .144 (3.66) — — .128 (3.25) .128(3.25) x .146 (3.71) Slot .156 (3.96) — — .156 (3.96) .156 (3.96) — .160 (4.06) .163 (4.14) .178 (4.52) — CODE x03 - FLOATING EYELETS Applicable Series 303, 305, 306, 307, 310, 315, 316, 317, 321, 323, 333, 336, 337, 338, 341, 345, 346, 355, 356, 357, 379, 384, 387, 391, 395, 396 342, 392 "A" .328 (8.33) .348 (8.84) CODE x07 & x08 - THREADED INSERTS q Applicable for 303, 305, 306, 307, 310, 315, 316, 317, 321, 323, 325, 333, 336, 337, 338, 341, 342, 345, 346, 356, 357, 379, 384, 387, 391, 392, 395 and 396 Series q See Code x12 for Side Mounting Threaded Inserts CODE x12 - SIDE MOUNTING HOLES Applicable Series 307, 333, 337, 345, 346, 357, 387, 395, 396 342, 392 "A" .125 (3.18) .135 (3.43) q Series Listed Above based on Availability of 90 Degree Bend Contact Tails. Side Mounting Holes may also be Used for Other Card Edge Connectors with a Lug Height of .250 (6.35) or Greater. q For Side Mounting with Threaded Inserts, Specify Code x17 for M3-0.5 Metric Threads or Code x18 for #4-40 Unified Threads. Page 68 Tel: (416) 754 - 3322 CARD EDGE CONNECTORS - MOUNTING OPTIONS Standard Mounting Details CODE x58 & x68 - OFFSET CARD GUIDES Applicable Series for Code x58 Guides 305, 306, 307, 315, 316, 337, 338, 355, 356, 357, 387 345, 395 346, 396 Applicable Series for Code x68 Guides 305, 306, 307, 315, 316, 337, 338, 355, 356, 357, 387 "A" .468(11.89) "B" 2.755(69.98) "C" .125 (3.18) "D" .423(10.74) .468(11.89) 2.755(69.98) .468(11.89) 2.755(69.98) "A" .344 (8.74) "B" 2.505(63.63) .120 (3.05) .120 (3.05) "C" .060 (1.52) .402(10.21) .398(10.11) "D" .242 (6.15) q For Card Guides with .128 (3.25) Dia. Through Hole Inserts, Specify Code x52 or x62. q For Card Guides with M3-0.5 Metric Threaded Inserts, Specify Code x57 or x67. q For Field Assembly of Card Guides, Refer to Page 71. CODE x78 & x88 - IN-LINE CARD GUIDES Applicable Series for Code x78 Guides 305, 306, 307, 315, 316, 337, 338, 355, 356, 357, 387 317 345, 395 346, 396 Applicable Series for Code x88 Guides 345, 395 "B" 1.550(39.37) 1.712(43.48) 2.750(69.85) 2.750(69.85) "B" 1.250(31.75) "C" .090 (2.29) .110 (2.79) .083 (2.11) .091 (2.31) "C" .083 (2.11) q In-Line Card Guides are Not Suitable for the Flush Mounting Lug Versions of 337, 387, 346 or 396 Series q For Card Guides with .128 (3.25) Dia. Through Hole Inserts, Specify Code x72 or x82. q For Card Guides with M3-0.5 Metric Threaded Inserts, Specify Code x77 or x87 q For Field Assembly of Card Guides, Refer to Page 71. Fax: (416) 754 - 3299 Page 69