ACE716

www.locamation.com ACE-716 Rugged AC/DC Input 150W Power Supply ● Hi-pot PFC BAUART GEPR FT ¤ T V Rheinland SPECIFICATIONS ● Input Table : Input Range 85~135V AC or 180~265V AC, 47~440Hz -36 ~ -72V DC +19 ~ +30V DC Model ACE-716A/716AP ACE-716T ACE-716C ● Output Input Current 4A@115V AC or 2A@230V AC 6A@-48V DC 12A@+24V DC isolation : — 4300V DC, input to output for one minute — 2200V DC, input to ground for one minute ● MTBF : — ACE-716A : 188,800 hours — ACE-716T : 212,050 hours — ACE-716C : 187,490 hours ● Safety : Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN 60950 ● EMI : — Meets FCC docket 20780 curve "A", EN50081-2 : CISPR22 "A" — Harmonic EN 61000-3-2 for ACE-716AP ● EMS Standard (Designed to meet the following limits) : — EN 50082-2 — IEC 801-1 8KV (Air Discharge) criteria B (ACE-716A/716AP) — IEC 801-3, 10V/M criteria A — IEC 801-4, 2KV criteria B (ACE-716A/716AP) — IEC 801-5, 2KV criteria B (ACE-716A/716AP) ● Built-in cooling fan ● Operating Temperature : -20o ~ 70oC (Derating curve will occur 50o ~ 70oC) ● Storage Temperature : -20o ~ 85oC ● Dimensions : 97(W) x 40.5(H) x 198(D)mm; (3.8" x 1.6" x 7.8") Table (at 50oC) : Rated Load Max. Output -12V 1A 1.5A 1.5A +5V +12V -5V -12V +5V +12V -5V 18A 4A 0.5A 1A 25A 10A 1A 18A 4A 0.5A 1A 25A 10A 1A 18A 4A 0.5A 1A 25A 10A 1A ORDERING INFORMATION ACE-716AP Rugged AC input 150W PFC power supply ACE-716A Rugged AC input 150W power supply ACE-716T Rugged 48V DC input 150W power supply ACE-716C Rugged 24V DC input 150W power supply Model ACE-716A/716AP ACE-716T ACE-716C ● Inrush Current (ACE-716A/716AP) : Not exceed 15A@115V AC or 30A@230V AC ● Ripple and Noise : Less than 100mV ● Line Regulation : The line regulation for each outputs are less than –1%, while measuring at rated loading and –10% of input voltage changing ● Load Regulation : — ACE-716A/716AP : Less than –3%@–5V and -12V, –6%@+12V — ACE-716T/C : Less than –1%@–5V and -12V, –4%@+12V ● Efficiency : — ACE-716A/716AP : Higher than 75% — ACE-716T/C : Higher than 70% ● Hold-up Time (ACE-716A/716AP) : 20ms (typical)@115V AC ● Altitude : 0 ~ 10,000ft ● Protection : Over voltage protection. The trip point is around 5.9V ~ 7.0V output ● Thermal Protection : Built in 110–5oC thermal switch in HS1 ● Vibration : 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis ● Impact : 10G for 20ms once on each X, Y and Z axis DIMENSIONS Auke Vleerstraat 26 7521 PG Enschede The Netherlands Phone +31 (0)53 480 33 66 Fax +31 (0)53 435 32 91 Email sales@locamation.nl 8-13