AZ2250-1A-48DF

AZ2250 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • 1 Form A, B and C contacts available AC and DC coils available High dielectric strength version available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 GENERAL DATA SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current: 30 A (Form A) 15 A (Form B) Max. switched voltage: 277 VAC, 28 VDC UL, CUR 1 Form A 30 A at 277 VAC, General Use [1] [2] 2 Hp at 250 VAC [1] [2] 1 HP at 125 VAC [1] [2] 30 A at 28 VDC [1] 20/60 A (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form B 15 A at 277 VAC, General Use [1] 10 A at 28 VDC [1] 0.5 HP at 250 VAC [1] .25 HP at 125 VAC [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form C 30/20 A (N.O./N.C.) at 277 VAC, General Use [1] [2] 20/10 A (N.O./N.C.) at 28 VDC [1] 2/0.5 HP (N.O./N.C.) at 250 VAC [1] [2] 1/.25 HP (N.O./N.C.) at 125 VAC [1] [2] 20/60 (FLA/LRA) at 277 VAC 30k cycles, N.O. [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles, N.C [1] Material Resistance Silver cadmium oxide [1] or silver tin oxide [2] < 50 milliohms initially (24 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Operate Time Release Time Dielectric Strength (at sea level for 1 min.) CONTACTS Arrangement Ratings Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. 15 msec max. at nominal coil voltage 10 msec max. at nominal coil voltage (without suppression) 1500 Vrms contact to contact 2500 Vrms contact to coil 4000 Vrms contact to coil “T” version 1000 megohms min. at 20°C, 500 VDC 50% RH DC: > 10% of nominal coil voltage AC: > 20% of nominal coil voltage -40°C (-40°F) to 85°C (185°F) - DC coils -40°C (-40°F) to 70°C (158°F) - AC coils -40°C (-40°F) to 105°C (221°F) 0.062" (1.5 mm) DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C., 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 36 grams 40 per plastic tray / 280 per carton box Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 500 mW (DC coil) 1.4 VA (AC coil) 1.7 W at 20°C (68°F) ambient 2.7 VA at 20°C (68°F) ambient 43°C (77°F) at nominal coil voltage 155°C (311°F) Max. Immersion Time Weight Packing unit in pcs NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-12-22 Junkersstrasse 3, D-82178 Puchheim, Germany AZ2250 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 5 6 9 12 15 18 24 48 110 Nominal Coil VAC 12 24 120 208 220/240 277 Must Operate VDC 3.75 4.50 6.75 9.0 11.3 13.5 18.0 36.0 82.5 Must Operate VAC 9.6 19.2 96.0 166.4 176.0 221.6 Max. Continuous VDC 6.4 7.8 12.2 15.4 19.8 24.1 32.0 62.6 163.2 Max. Continuous VAC 13.8 27.6 138.0 239.2 276.0 318.5 Nominal Current mA ± 10% 185 150 93 77 59 47 36 19 8 Nominal Coil Power VA 2.3 2.1 2.3 2.2 2.2/2.6 2.2 Coil Resistance Ohm ± 10% 27 40 97 155 256 380 660 2,560 13,450 Coil Resistance Ohm ± 10% 25 100 2,500 11,000 13,490 15,000 ORDER NUMBER* AZ2250–1A–5DF AZ2250–1A–6DF AZ2250–1A–9DF AZ2250–1A–12DF AZ2250–1A–15DF AZ2250–1A–18DF AZ2250–1A–24DF AZ2250–1A–48DF AZ2250–1A–110DF COIL SPECIFICATIONS – AC Coil 50/60 Hz ORDER NUMBER* AZ2250–1A–12AF AZ2250–1A–24AF AZ2250–1A–120AF AZ2250–1A–208AF AZ2250–1A–240AF AZ2250–1A–277AF * Substitute “1B” or “1C” in place of “1A” for 1 Form B or 1 Form C. Add suffix “E” to “1A” or “1B” or “1C” for silver tin oxide contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. Substitute “TF” in place of “F” for 4000 Vrms dielectric strength version. MECHANICAL DATA PC BOARD LAYOUT .130 (3.3) .504 (12.8) .400 .300 (10.16) (7.62) 3 x ø .083 [ø 2.1] 1.268 (32.2) .693 (17.6) .900 (22.86) 2 x ø .043 [ø 1.1] .094 (2.4) 1.063 (27.0) .181 (4.6) .791 (20.1) .150 (3.8) .550 (14.0) .700 (17.8) .197 (5.0) Viewed toward terminals WIRING DIAGRAMS .098 (2.5) Form A Form B Form C .045 x .045 (1.14 x 1.14) .032 x .062 (0.81 x 1.57) .025 x .025 (0.63 x 0.63) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-12-22 Junkersstrasse 3, D-82178 Puchheim, Germany