AZ832P2-2C-3DSE

AZ832P POLARIZED DIP RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • • • High sensitivity, 42 mW pickup Low profile DIP package Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Single and dual coil versions DC coils to 24 VDC High switching capacity, 60 W, 250 VA Fits standard 16 pin IC socket Epoxy sealed UL, CUR file E43203 GENERAL DATA DPDT (2 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 60 W or 250 VA Max. switched current: 5 A Max. switched voltage: 250 VDC or 250 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Set Time (typical) Reset Time (typical) Bounce (typical) Dielectric Strength (at sea level) Minimum operations 2 x 107 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC 3 ms at nominal coil voltage 3 ms at nominal coil voltage 3 ms 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric 1000 megohms min. at 20°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) 50 g at 10–500 Hz 50 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 5 grams Rated Load UL Material 2 A at 25 VDC resistive 1 A at 120 VAC resistive Gold plated silver against palladium silver. Gold plated palladium silver against palladium silver (Suffix “A”) < 50 milliohms initially Insulation Resistance Ambient Temperature Operating Storage Vibration Shock Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Standard coil: 128 mW Sensitive coil: 96 mW 0.9 W at 20°C (68°F) Max. 115°C (239°F) Enclosure Terminals Max. Solder Temp. Max. Solder Time NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. Max. Solvent Temp. Max. Immersion Time Weight ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-04-29 Junkersstrasse 3, D-82178 Puchheim, Germany AZ832P RELAY ORDERING DATA STANDARD SINGLE COIL COIL SPECIFICATIONS Nominal Coil VDC 3 5 12 24 Max. Continuous VDC 9.0 15.0 36.0 60.0 Coil Resistance ± 10% 90 250 1,440 4,000 Set Reset VDC 2.25 3.75 9.0 18.0 ORDER NUMBER* AZ832P1-2C-3DE AZ832P1–2C–5DE AZ832P1–2C–12DE AZ832P1–2C–24DE SENSITIVE SINGLE COIL 3 5 12 24 10.4 17.2 41.6 83.1 120 330 1,920 7,680 2.25 3.75 9.0 18.0 AZ832P1-2C-3DSE AZ832P1–2C–5DSE AZ832P1–2C–12DSE AZ832P1–2C–24DSE STANDARD DUAL COIL COIL SPECIFICATIONS Nominal Coil VDC 3 5 12 24 Max. Continuous VDC 6.4 10.6 25.5 42.8 Coil Resistance ± 10% 45 125 720 2,040 Set Reset VDC 2.25 3.75 9.0 18.0 ORDER NUMBER* AZ832P2-2C-3DE AZ832P2–2C–5DE AZ832P2–2C–12DE AZ832P2–2C–24DE SENSITIVE DUAL COIL 3 5 12 24 7.3 12.3 29.4 58.8 60 167 960 3,840 2.25 3.75 9.0 18.0 AZ832P2-2C-3DSE AZ832P2–2C–5DSE AZ832P2–2C–12DSE AZ832P2–2C–24DSE *Add suffix “A” for gold plated palladium silver against palladium silver contact material. MECHANICAL DATA MECHANICAL DATA .048 [1.21] PC BOARD LAYOUT TWO COIL VERSION .795 MAX. [20.20] .394 MAX. [10.00] .100 [2.54] .047 [1.19] 1 2 4 6 8 .026 [0.66] .419 MAX. [10.65] 16 15 13 11 9 .300 [7.62] .118 [3.00] .048 [1.21] 10x .024±.005 [0.61±0.12] 10x .012±.005 [0.30±0.12] 10 x ø.039 [ø1.0] 3 x .200 [5.08] WIRING DIAGRAM TWO COIL LATCHING WIRING DIAGRAM SINGLE COIL LATCHING 12 4 6 8 + + NOTE: DIAGRAMS SHOW THE "RESET" POSITION BEFORE ENERGIZED 1 4 6 8 + 16 15 SET 13 RESET (WATCH FOR POLARITY) WITH POLARITY AS SHOWN 16 13 11 9 11 9 (WATCH FOR POLARITY) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2003-04-29 Junkersstrasse 3, D-82178 Puchheim, Germany